Having problems with your Vacuums ?

Do you know how to change a emptor assembly

\015 I've got a Kirby G4 and I need to replace the emptor assembly. Do you know how to change it?\015

Answers :

Http://geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=725050 Generic problem for all Vacuums… Do you know how to change an emptor assembly? Posted by smcgee on June 30, 2008 I've got a Kirby G4 and I need to replace the emptor assembly. Do you know how to change it?
I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service procedure. The Kirby mini emptor assm can be replaced by going inside of the cloth bag and looking for the ty tie that is hold it onto the clothe outer bag and cut the ty tie to release the mini emptor on the Kirby. The bag @ the bottom has elastic around the bottom and should come right off; it will be tight but should come off. The front of the mini emptor has a gasket so make sure the new one has the same small gasket also, and that will just turn and unhook. You need to find a new ty tie just as long as the one you are removing; either from a local vacuum cleaner store, the Kirby Factory Cust serv (Parts) or try the Home Depot or Menards or a box store similar to those. So if you need further assistance, please feel free to contact your local vacuum cleaner dealer in your area or in the yellow pages, or contact the factory phone number or website to further assist you with your questions.

\015\012http://kirby.com/ Customer Service – U. S. & Canada 1-800-494-8586
\015\012Hours 8:00 am to 5:00 pm (EST) U.S. & Canada Fax # 1 (216) 529-6146
\015\012Mail To: Consumer Relations
\015\012The Kirby Company
\015\0121920 West 114 Street
\015\012Cleveland, OH 44102
\015\012Thanks, Don the Vac Man
Go Ahead. Use Us.

Repair Help & Product Troubleshooting for Vacuums

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Do you know how to change a emptor assembly

Http://geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=725050 Generic problem for all Vacuums… Do you know how to change an emptor assembly? Posted by ... Vacuums

I need to change the motor in a vax 6131 but i don't know how to get into it to get the change it? I also need to get into the motor assembly housing to change a part but can't see how it comes apart!!

On the handle there is one small pozidrive screw, remove and orange panel comes away revealing powercable securing bar. Remove 2 screws and this reveals a 10mm headed bolt. Under label on top of handle there is another small pozzi screw, undo t ... Vacuums

I have a Hoover steam vac Model #F5865-900. I am unable to have the cleaning mode change from tools to floor when lowering the handle release. I hear a click, but the indicator stays on tool. I need to know how to get to the assembly that controls the cleaning mode.

... Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum

Kirby Seems like you know alot about the Kirby. I know how to use my Sentria (unlike these other idiots) but I keep screwing up the shampoo tray assembly. The brush snaps into the tray just fine but the tray doesn't really stick to the head. It detaches when pushing and pulling the unit. And who knows where that cover goes? It say 'push here to open'

Machine will not come on ... Kirby G6 Bagged Upright Vacuum

As a new owner to a previously owned home there is a craftsman keypad on the outside of the garage of which we do not know the access code. the home has been through several owners and the folks we purchased the house from did not know the password in order to pass it on to us. we would like to use the keypad but don't know how to change it. can you help? the mode # is 139.53684, thanks for any assistance you may be able to give. PS: there was also another model # on the keypad it is 139.1

... Vacuums

I do not have my users manual and have never vacuumed wet with this vacuum. How do I change it from a dry to wet vacuum. Can't find my manual and I need to use the shop vac for water in basement, do I have to change the filter or what lost my user manual never used it to pick up water. need to know how to puit it in wet mode i want to clean the dirty water out of my pool.

\015\012Vacuuming Liquids\015\0121. When picking up small amounts of liquid\015\012the filter may be left in place.\015\0122. When picking up large amounts of liquid\015\012we recommend that the filter be\015\012r ... Craftsman 17765 Canister Wet/Dry Vacuum

My Dirt Devil Model 088520 has a brush assembly that wont spin. How can I either change the bearing or free it up somehow? I have been searching for a new brush assembly part number 2860145000 but it

Try this link > http://dirtdevil.com/parts/category/brushrolls-uprights/ ... Dirt Devil Vacuums

My Oregon Scientific BAR888 has 5 windows, 1. temperature, 2. humidity, 3. mb/hPa or inHg (switch at the back), 4. bars showing pressure changes over 24 hours, and 5. time/date. Window 3 gives an option to set something between 0 and 2500. Oregon say they only have one set of instructions for the BAR888 but they do not match my instrument as there is nothing included for my window 3. Trouble is I don't know what the 0 to 2500 relates to and therefore don't know what to set it at.(My model does n

... Vacuums

My Oreck XL upright is blowing out instead of sucking in. I changed the bag and cleaned the brushes; I also cleaned out the main "pipe." I looked for a place to change settings and couldn't find any, so I know I didn't inadvertently switch something. The brushes seem to be spinning at the correct speed. Thank you, Julia Byrem

... Oreck XL2200 Bagged Upright Vacuum

Its the widepath bagged tempo, i need to change the belt but do not know how. How do i change the belt

If I recall correctly - there are screws in the bottom of the front piece that holds the roller, remove them and a plate will come off. Under the plate you will see the rollerbrush - it should pull out and has plastic tabs with bushings on the ends - ... Hoover Tempo Widepath Upright Vacuum - Blue

Assemble i don't know how to assemble it i don;t understand were to put the part that goes in the canister to retrieve cleaner. to get it through the nossel

This website should help.\015\012http://www.bissell.com/images/UserGuides/16311.pdf ... Bissell 1631 PowerSteamer ProHeat Canister Vacuum

I need to know how to change my kirby into a blower?

Raise the light assessory on the front of the vac. Remove the roller assembly by rotating the square dial as indicated by the arrows. Then you must attach the accessory that sort of looks like a 4 inch square open box to the front of the vac where ... Kirby G4 Bagged Upright Vacuum

Need to Know how to change to a shamporer

You can buy manuals HERE, but before you do so I'd say - see our FREE online shampooer manual ... Kirby Ultimate G Bagged Upright Vacuum

Don't know how to change attachments

Can you take a photograph of the attachements and send it to this e-mail address:\015\012\015\[email protected]\015\012\015\012I need to ver ... Filter Queen Majestic Canister Vacuum


Http://geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=698891\015\012Generic problem for all Vacuums\015\012DONT KNOW HOW TO CHANGE MY BELT\015\012Posted by m ... Vacuums

I need to know how to change the belts on this vacuum

... Hoover Ultra U6430-900 WindTunnel Bagged Upright Vacuum

How to change Mini Em-Tor Fill Tube Assembly on Kirby G4


I went to change the bag on my eureka powermite 930a and the whole thing came off. I don't know how to get the part that holds the bag back on. Help!!

... Vacuums

I have a hitachi 1300 upright hoover and dont know how to change sdrive belt

... Hitachi Vacuums

Dont know how to change the belt on a 1697 bissel powersteamer pro

There is a great video on the Bissell site. 1 min watching it shows you how.Basically you unplug it, take out the tanks, turn it upside down, remove the 2 red clips that hold the brush assembly, and lift the assy out, then replace belts. ... Bissell 1697-7 Powersteamer Pro Deluxe Vacuum

Need to know how to reassemble the head with new neck assembly

... Sebo Air belt K3 Bagged Canister Vacuum

Just need to know how to change the belt on my vacuum cleaner

Step 1: Lower handle to floor to change belt Step 2: Remove the two screws from the top hood on the footStep 3: Lift hood to remove Step 4: Lift right end of brushroll (the belt end) Step 5: Remove and discard belt.Step ... Eureka Altima Upright Vacuum Model 2996AVS Vacuum

Filter I bought this Hoover a few years ago-- just now about to use it first time. I cannot find my user's manual and don't know how to change the filter-- or to clean it or whatever I am supposed to do with it. Also, there is a handle on one side of the unit that seems to be attached to an empty chamber or canister kind of thing. It looks like it should pull out, but it does not budge. I really would like to have a manual, but can't seem to find one. Is there a similar model that is still

This is not for the exact same model, but should help you out:\015\012http://edge.maytag.com/epipubs/56511B47.PDF ... Hoover U8143-900 Upright Vacuum

I have lost my owners manual and need to know how to change the belt on my cannister vacuum.

Http://www.managemyhome.com/mmh/lis_pdf/OWNM/L0601245.pdf ... Kenmore Vacuums

I dont know how to change a shampoo pump on a bissell shampooer. Do you have instructions for me?

I need instructions how to change a shampoo pump on a 8910 bissel floor cleaner ... Bissell Vacuums
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0391 seconds