Having problems with your Vacuums ?

Fantom upright vaacum- cyclone XT

\015 Vacuum motor not running. Brush motor OK. How do you get to Vacuum motor? Information needed to disasemble to motor level. Have not gone beyond brush motor checkout.\015\012Thanks\015

Answers :

There are two screws just to the rear of the accessory compartment. There are also two hidden screws under the cord retractor lever. I tried to get the retractor off by pulling upward on it, but it just wouldn't come. It is not screwed down but held by friction via its hinges. The way I got at the last two screws was by drilling a couple of holes thru the plastic cord retractor lever - about 1" from the end of the lever on left side (looking from the rear of vac) and about 0.5" from the other end of lever.
Repair Help & Product Troubleshooting for Vacuums

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Fantom upright vaacum- cyclone XT


There are two screws just to the rear of the accessory compartment. There are also two hidden screws under the cord retractor lever. I tried to get the retractor off by pulling upward on it, but it just wouldn't come. It is not screwed down but held ... Vacuums

Phantom XT cyclone switch wiring - Fantom Vacums Cyclone XT Upright Vacuum


... Fantom Vacums Cyclone XT Upright Vacuum

Fantom FM741B vacuum cleaner user manual - Fantom Vacums FM760 Twister 500DX Bagless Upright Cyclonic Vacuum


... Fantom Vacums FM760 Twister 500DX Bagless Upright Cyclonic Vacuum

Beater brush runs intermittently - Fantom Vacums Cyclone XT Upright Vacuum


Try changing the the belt.If it is worn it could cause your problem ... Fantom Vacums Cyclone XT Upright Vacuum

Need to change the belt on model #FC285HL - Fantom Vacums Cyclone XT Upright Vacuum


Http://www.fixya.com/support/p12053-fantom_vacums_cyclone_xt_upright_vacuum\015\012\015\012there is a pro waiting to help you live ... Fantom Vacums Cyclone XT Upright Vacuum

Not picking up, not getting any suction. - Fantom Vacums FM760 Twister 500DX Bagless Upright Cyclonic Vacuum


Try to clean the filter out. I have a similar vacuum and I clean mine out and wash the filter out. Leave the filter to dry overnight before you use it again.If this fails try figure out if there is something blocking it so it is not able ... Fantom Vacums FM760 Twister 500DX Bagless Upright Cyclonic Vacuum

What year was this model made - Fantom Vacums FM760 Twister 500DX Bagless Upright Cyclonic Vacuum


... Fantom Vacums FM760 Twister 500DX Bagless Upright Cyclonic Vacuum

Wont **** up anything - Fantom Vacums Cyclone XT Upright Vacuum


That\015\012 type of vac is notorious for stopping up where the 90 degree turn is. \015\012You may need to access it from the vac head by removing the beater bar \015\012or take it apart where ever you can access the turns and hoses. ... Fantom Vacums Cyclone XT Upright Vacuum

My fantom cyclone XT 12 amp upright vacuum overheats and shuts off. What should I do.


... Fantom Vacums XT450K Upright Vacuum

How do i replace the belt on my vacuum - Fantom Vacums Cyclone XT Upright Vacuum


There are two black screws on the back of the hood top that need to be taken out and then the top hood will come off forward. Then you can see the belt and rollerbrush. Slide to rollerbrush out and put on a new belt to the motor pulley and then put ... Fantom Vacums Cyclone XT Upright Vacuum

My Fantom Thunder upright has a blockage that sounds like it is directly above the dirt bin in the "head". I cannot access it from inside the bin chamber by going up the nozzle with a claw parts retriever. (This is the older model where the cyclone nozzle doesn't come off.) The wand, hose, rear inspection port, and front brush intake are all clear. How do I get the top of the vac off above the dirt bin? I don't see any screws or slots.


... LG Vacuums

Dyson will not lock in the upright position - Dyson DC07 Bagless Upright Cyclonic Vacuum


There is a video guide here for this: \012\012 ... Dyson DC07 Bagless Upright Cyclonic Vacuum

I need an exploded view of dyson upright? - Dyson DC14 Bagless Upright Cyclonic Vacuum


... Dyson DC14 Bagless Upright Cyclonic Vacuum

There is no suction when using as an upright - Dyson DC07 Bagless Upright Cyclonic Vacuum


Detach the hose from power nozzle and check PN for clog. This is the most likely problem if the accessory tools work with the vacuum. ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Vacuum will not go completely upright - Dyson DC07 Bagless Upright Cyclonic Vacuum


This is something I've been seeing a lot lately, so don't feel like you're the only one with this problem.here's a link to a fix you can try that might solve your issue: ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Bissell Power Track Cyclonic Upright Bagless Vacuum.. ..The spin brush works laying down....when upright it won't spin! I cleaned any and all hair from the roller....belt is not broken....but do I need a new belt though? The vac is a few years old bever replaced the belt yet.


You need a new belt. ... Vacuums

NO CYCLONIC ACTION IN DUST CUP - Dyson DC07 Bagless Upright Cyclonic Vacuum


Look for ALL the filters. You may be suprised that most cyclonic vacuums have 3 filters. These get clogged up quickly and when that happens the cyclonic action stops completely. Look under the clear cyclone dirt catcher, there is usually a dust fi ... Dyson DC07 Bagless Upright Cyclonic Vacuum

How to put new cable on dyson dc07 upright - Dyson DC07 All Floors Bagless Upright Cyclonic Vacuum


Have a look at www.dysonmedic.com which has some excellent info on your machine. ... Dyson DC07 All Floors Bagless Upright Cyclonic Vacuum

HOW DO I CHANGE THE MOTOR ON A DYSON UPRIGHT - Dyson DC07 Bagless Upright Cyclonic Vacuum


Go to www.dysonmedic.com then scroll to the bottom of the page and click on DC07 motor replacement. You will find very detailed illustrated guidance. ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Replace belt for dyson upright - Dyson DC07 Bagless Upright Cyclonic Vacuum


DC07s have two belts - one connects the output of the motor to the clutch, the other connects the clutch to the brush bar.I suspect the belt ... Dyson DC07 Bagless Upright Cyclonic Vacuum

How to dismantle a dyson dc07 cyclone - Dyson DC17 Animal Bagless Upright Cyclonic Vacuum


Hi there,We wouldn't recommend attempting to dismantle your Dyson's cyclone assembly as this may cause damage. If you feel your machine isn't working as well as usual, I'd encourage you to get in touch with us directly so we can help - you ca ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

Fantom twister wont work light is on - Fantom Vacums FM780 Twister 700LX Upright Vacuum


When you say, "just stopped", did the MOTOR stop operating and there's no sound from it at all? Or, is the motor still working or sounds like it does, and it stopped vacumning?\015\012\015\012If the MOTOR stopped, most likely there is a ... Fantom Vacums FM780 Twister 700LX Upright Vacuum

How to clean canister, filters and cyclone? - Dyson DC17 Animal Bagless Upright Cyclonic Vacuum


... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

The cyclone tubes have stopped spinning. - Dirt Devil Reaction Twin Cyclone Upright Vacuum


HELLO,The electric motor has a thermal switch and is self-resetting so there\015\012is no re-set switch. Make sure the air filter for the exhaust is clean.\015\012Also make sure that the height adjustment is not too low causing strain\015\012on the m ... Dirt Devil Reaction Twin Cyclone Upright Vacuum

Dyson DC 14 upright not suctioning - Dyson DC14 Animal Bagless Upright Cyclonic Vacuum


Start by cleaning the filters. Watch this video: \015\012\015\012\015\012 ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0462 seconds