Having problems with your Vacuums ?

How to take the bottom off to replace the belt on a Hoover Elite U5061-900

Answers :

\015\012Generic problem for all Vacuums
\015\012How to take the bottom
\015\012Posted by 4456 on Jul 07, 2008
\015\012How to take the bottom off to replace the belt on a Hoover Elite U5061-900
I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service procedure. Some Hoover Elites have either screws or clips and the bottom plate should come off without a problems. Or if that is not the case then once you remove the screws then the top cover will come off and you can replace the belt from the top. If you have further questions please feel free to contact your local vacuum cleaner dealer in your area, or contact the Hoover website and or the cust serv phone # @ Hoover listed below. So if you need further assistance, please feel free to contact your local vacuum cleaner dealer in your area or in the yellow pages, or contact the factory phone number or website to further assist you with your questions.

\015\012http://www.hoover.com Telephone
Contact our Customer Service Department at 1.330.499.9499
Monday through Friday
8 a.m. - 7 p.m. EST

\015\012Thanks, Don the Vac Man
Go Ahead. Use Us.

Repair Help & Product Troubleshooting for Vacuums

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

How to take the bottom off to replace the belt on a Hoover Elite U5061-900

Http://geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=749807\015\012Generic problem for all Vacuums\015\012How to take the bottom\015\012Posted by 4456 on Ju ... Vacuums

How to replace a belt on a Hoover ELite 350 - Hoover Elite U5061-900 Bagged Upright Vacuum

... Hoover Elite U5061-900 Bagged Upright Vacuum

I need to replace the agitator belt on a Hoover Elite U4465-9 upright vacuum cleaner. I have removed the bottom cover, but there is no access to the motor spindle to loop the belt around. How do I do this?

... Vacuums

Replace broken belt on a Hoover Elite Rewind. Removed bottom panel, how do I remove brush to put on new belt?

I have the agitator belt style 190 for the Hoover elite rewind I put it on and the belt broke again what do I do help carpet needs cleaning. ... Hoover Elite Rewind Bagless Upright VacuumVacuum

Hoover turbo power 1500 have part of bottom off to replace belt but can't find where to attach it? must be more parts to take off but how?

... Hoover Elite U5061-900 Bagged Upright Vacuum

I need to replace the belt on my hoover fusion plus upright vac. But I cannot find what belt it takes. the number on the belt is worn off

Hello : \015\012\015\0121:Unplug your Hoover vacuum. Turn the vacuum up-side-down and place the motor and vacuum portion on a counter top with the handle hanging down toward the floor. This makes it easy to work on the underside of ... Hoover Fusion Plus Cyclonic Upright Vacuum Vacuum

Belt replacement Does Hoover Windtunnel V2 model # U8148-900 even take a belt? The owner's manual only describes how to change belt in powered hand tool, not the vacuum itself.

No belt- it is motor driven. what happens to these if the rollers get stuck(by- say, a Lego® or something)  is the roller itself has an insert which will break, requiring roller replacement. \015\012\015\012simple fix, but costs a ... Hoover WindTunnel V2 U8148-900 Upright Vacuum

Hoover Elite 300 belt replacement?

Take the broken belt to a vacuum cleaner repair shop to match it up to a replacement. ... Vacuums

I need a replacement belt for Hoover Elite upright vaccum ,model no. U5043-930. What belt do I get?

Hello, \015\012\015\012Your vacuum cleaner originally came with Hoover belt part number 38528027, however Hoover has now discontinued this part number, and replaced this belt with the new belt which is part number 38528040.\015\012 ... Hoover U5227-930 Elite Upright Vacuum

How to replace hoover u5071-930 vacuum belt - Hoover U5227-930 Elite Upright Vacuum

... Hoover U5227-930 Elite Upright Vacuum

Hoover elite 300 belt replace - Hoover Vacuums

... Hoover Vacuums

I also have a Hoover upright and I need to replace the electrical cord. I have dimantled the back, where the tools are stored, and the hose. I still cannot find the screws or whatever, to get to the area behind the cord, so I can replace it. I think I will have to take off the bottom too. Has anyone out there tried to do this? It seems crazy. This machine works great so I hope I can also put it back together. Thanks for the help.

Since I do not know your specific model I can only supply you with general instructions. Be aware that most of the time you only need to gain access to the on/off switch to replace the power cord. Also Make sure that you are replacing the existing co ... Vacuums

I have a replacement belt for my hoover elite 600. It's not obvious how to replace it!

Turn the vac over so the bottom is up..\015\012On the framing around the brush - there should be some screws.\015\012Take them out and the framing around the brush should pop off.\015\012Pull out the one side of the brush that the b ... Vacuums

Need instructions on how to replace the belt on a hoover dirt finder model u5321-930

You can download the manual from the link below:\015\012\015\012http://www.hoover.com/Media/ModelPDF/U5468900.pdf\015\012\015\012Please update the question & let us know if the information given was useful to you - Good Luck! ... Hoover 5416-900 WindTunnel Bagged Upright Vacuum

Hi, i have a hoover steam vac agilty. the brushes on the bottom front quit spinning. they are not locked up as i can freely turn them by fingers. is there a belt that i need to replace? if so, how do i get at it to replacec it? thank you for any assistance

The brushes on all hoover steam vacs are air opperated it uses the suction of the vacuum motor to spin a turbine and in turn spin the brushes. Most likely that path of air is clogged with hair or carpet fuzz. On the top of the machine there is a litt ... Hoover Vacuums

How to replace the belt in hoover elite U5512-900

... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

What type of belt does a hoover elite rewind model number UH71009 take?

... Hoover Elite Rewind Bagless Upright VacuumVacuum

How to take off the bottom lid to get to the flat belt on Hoover vacuum cleaner, model #U5077-930

... Hoover U5194-900 Mach5 Multi-Chamber Cyclonic Vacuum Cleaner Bagless Vacuum

How to replace fan impeller on old Hoover upright. Taking off the belt pulley is giving me the problem.

Depends on how old it is ... if it is real old try putting a open end wrench on metal belt pully, and then hit wrench with a hammer i think counter clockwise to loosen ... Hoover U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum

My hoover elite rewind is making a louder noise and I can smell something burning when I use it. I have replaced the belt but this did not help.

The smell is either the motor or the belt, if motor hope it is under warranty, if belt make sure brush roll spins freely and replace belt, if brush roll not spin freely replace it first ... Hoover U5507900 Elite Rewind Bagless Upright Vacuum

How do you take apart a hoover brush n wash to replace the belt

Generic problem for all Vacuums\015\012How do you take apart?\015\012How do you take apart a Hoover brush n wash to replace the belt?\015\012 \015\012I wo ... Vacuums

I have a Hoover WindTunnel Bagless Vacuum Cleaner, Model #U5753-900, Serial number 110600215585, which I purchased from Loew's on 3/31/07. With it, came a Hoove Slider for hard floor surfaces, Model #S2105, Serial number 050500084989. The Slider strted making a noise--I thought something had been caught in the roller, but discovered, it had not; so I and my husband proceeded to take the Slider apart. I believe one of the belts had come off; but when we took the screws off the bottom to check

... Vacuums

How do you replace the belt on the hoover elite II 430

... Hoover Elite U5061-900 Bagged Upright Vacuum

I have an L shaped piece of metal with a hole at one end that fell out of my hoover elite bagged upright vaccuum cleaner. I repaired the belt but don't know where this metal piece goes. I think it has something to do with the wheel assembly which is replaced and it seems to want to stay there. any thoughts

This metal clip was for the wheel assembly, but not always needed. you can diregard the part if your vac is working correctly with the front wheels. ... Hoover Elite U5061-900 Bagged Upright Vacuum

I want to open a Hoover S3825 Elite Cyclonic Vacuum to see if I can repair or replace the cord reel assembly. Currently the reel slowly draws the cord back into the canister once it is pulled out. I found the mounting screws under the rear wheels once I removed the hub but I do not know how to remove the rear wheels, everything is plastic. The front screws are under the front caster wheels and I think I need to take a screwdriver and pry off the little cylinder wheel to get to them by rotating

... Vacuums
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0772 seconds