Having problems with your Vacuums ?

How to apply the belt on a kirby vacumn - Vacuums


Answers :

Http://geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=759766
\015\012Generic problem for all Vacuums
\015\012How to apply the belt
\015\012Posted by wccles on Jul 09, 2008
\015\012How to apply the belt on a Kirby vacuum
\015\012
\015\012Hello,
I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service procedure. The belt install on a Kirby is to raise the height adjustment to the highest level and then dial the belt off counter clockwise so it is loose and not on the fan pulley, release the top lever on the bell housing, then remove the bottom plate and unhook the brushroll on one side, slide the old belt off and then slide the new one on, replace the brushroll with the screws facing the carpet and re-hook the bottom plate on the Kirby. Then take the bell housing and hook that back on to the Kirby and lock it down. Then dial the belt on clockwise all the way and the belt should be on the fan pulley. The belt should be ready to go, plug in your Kirby and then do the step down on the vacuum height adjustment until the tone changes, then try to see id it picks up, if not go one more height adjustment and that should be the correct setting.

\015\012So if you need further assistance, please feel free to contact your local vacuum cleaner dealer in your area or in the yellow pages, or contact the factory phone number or website to further assist you with your questions.
\015\012http://kirby.com/
\015\012Customer Service – U. S. & Canada
\015\0121-800-494-8586
\015\012Hours 8:00 am to 5:00 pm (EST)
\015\012Mail To: Consumer Relations
\015\012The Kirby Company
\015\0121920 West 114 Street
\015\012Cleveland, OH 44102
\015\012Thanks, Don the Vac Man
Go Ahead. Use Us.

\015\012
Repair Help & Product Troubleshooting for Vacuums

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

How to apply the belt on a kirby vacumn - Vacuums


Http://geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=759766\015\012Generic problem for all Vacuums\015\012How to apply the belt\015\012Posted by wccles on J ... Vacuums

I have a kirby sentria. vacuumed up my son's headphones and immediately shut if off. took brush off, unwound headphones, put it back together. when i turned it back on, the belt snapped. so i went to vacuum place, got new belt, but when i put it on, with the green arrows lined up, it doesn't have much suction. with the red arrows lined up, it just smells like its burning and i don't want to break another belt! HELP!!


Take the front off the vacuum and check inside both the front portion and the canister for additonal clogs. Sometimes something will get caught in the impellor, causing the motor to overheat. Since there's little suction and the smell, I'd guess th ... Kirby Generation 3 Bagged Upright Vacuum

How to change belt on kirby heritage vacuum - Kirby Heritage II Vacuum


... Kirby Heritage II Vacuum

Where can I find kirby heritage vacuum brush belt 301282 and the vacuum bags for a 1984 kirby heritage?


... Vacuums

How to put on a kirby vacuum belt - Kirby Vacuums


The emblem on the front of the Kirby vacuum controls the installation of the belt. Rotate this emblem. ( I do not remember which direction it rotates). This relieves the tension on the belt. Replace the belt and rotate the emblem back to lock it ... Kirby Vacuums

Thank you for the detailed explanation regarding the kirby vacuum functions, but we would like more information about the exact shampooing instructions. in explanation we would like to know exactly what solution and in what quantity to apply first to the fabric... how long we need to let it soak in.... and how to remove the stains using only our kirby vacuum witjh shampoo attatchment from start to finish...


... Kirby Ultimate G Bagged Upright Vacuum

Kirby Sentra vacuum burning belts


Http://geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=565459\015\012Generic problem for all Vacuums\015\012Kirby Sentra vacuum burning belts\015\012posted by ... Vacuums

How to put a Kirby Vacuum belt back on New belt seems too short


To put on a kirby belt all you need to do is put on the belt on the brushroll, put the brushroll into the housing making sure the marks on the end of the brushroll are the same. Take the spin dial in the front and "hook" the belt till the dial reads ... Kirby G5 Bagged Upright Vacuum

How do you replace belt on a Kirby G5 - Kirby G5 Bagged Upright Vacuum


Hi there SmartAlec from NelsonVacuums.com.au here. I was going to write an explaination on how to do it when i cam across this great video clip of how to do it on youtube. ... Kirby G5 Bagged Upright Vacuum

How to put a new belt on a kirby vacuum - Vacuums


Here is a link to changing the belt on a Kirby vacuum cleaner http://www.totalvac.com/videos/kirby-vacuum-cleaners-videos.htm ... Vacuums

I need to know how to put my belt back on my kirby 2000 G6 vacuum belt


Greetings from GoVacuum,\015\012\015\012Here's a very informative video that we've recorded explaining in detail how to correctly install the belt on your Kirby Generation vacuum cleaner. I hope this will help you.\015\012\0 ... Kirby G6 Bagged Upright Vacuum

How do I replace the drive belt on a kirby G4? Actually the belt is already replaced I just need to know how to reattach that front part back onto the main vacuum. HELP


Greetings from GoVacuum,\015\012\015\012Here's a video we shot showing you in detail how to install a belt properly, and how to reattach the head properly. I hope this helps you;\015\012\015\012 ... Kirby G4 Bagged Upright Vacuum

How to change kirby vacuum belt? - Vacuums


Greetings,\015\012\015\012Here's a video where we show you how to replace the suction fan on a Kirby Generation vacuum cleaner (also known as the impeller blade). I hope this video helps; ... Vacuums

Oreck Belts Why do they smell badly and almost always break when being used for an extended period? I see Mr. Oreck in print, television and internet ads -- and he certainly carries himself as a credible person; a man you want to believe....But reading his biblliography -- he started his career (in this area as I know it) as a "Vacuum Cleaner Salesperson" for Whirlpool. Many vacuums brands - particularly those that are noit sold directly by retailers (Oreck, Kirby and others) use the commission-


Unfortunately this is a very common problem on the Oreck XL uprights. As you you noticed, there is even an extra belt storage on the machine itself, on the bottom plate. When a vacuum cleaner has to put an extra belt on the machine ... Oreck XL2200 Bagged Upright Vacuum

Install kirby belt 301291 - Kirby Ultimate G Bagged Upright Vacuum


I just figured it out myself.\015\012\015\012Thanks ... Kirby Ultimate G Bagged Upright Vacuum

Belt placemaent do you have a diagram showing the proper placement of the belt and how to engage. not my vacuum, and very new to the kirby. thank you. Becky


There is a great video on youtube showing how to do thisIt's not nearly as hard as they say at the beginning.look up "govacuum kirby belt replacement"http://www.youtube.com/user/GoVacuums?v=At7tqnjD-Kc&fe ... Kirby G6 Bagged Upright Vacuum

How to i get the belt on my kirby g4 - Kirby G4 Bagged Upright Vacuum


Complete instructions how to change/attach the belt you can see on our website:http://www.goodvac.com/articles.asp?id=143Good luck,Rocky ... Kirby G4 Bagged Upright Vacuum

Belt for kirby 2000 g limited edtion - Kirby Vacuums


I have troble resetting the belt on my Kirby 2000 vacuum cleaner ... Kirby Vacuums

Son took the front plate off the kirby heritage II vacuum thinking that was how to replace the belt, now don't know how to put the three rings and belt catcher back on?


Looked at a kirby vacuum that a family member has and saw how it was assembled! Thank You ... Kirby Heritage II Vacuum

Putting a new belt on on my kirby sentria - Kirby G6 Bagged Upright Vacuum


Http://geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=780370\015\012Generic problem for all Vacuums\015\012Putting a new belt on\015\012Posted by cowangelgir ... Kirby G6 Bagged Upright Vacuum

Burning smell There is a burning smell when I run my Kirby Ultimate G.  The smell seems to be coming from the belt.  I looked at the brushes and they are spinning so the belt is working.  the Post on the vacuum is getting very hot not sure if that is normal.  What is causing this?


Unlock the sweeper brushes and take them out. on each end is a cup bearing and should be free of debris.then check around and under the belt and likely there is debris wrapped around it.the post is getting hot as your pulling too much of ... Kirby Ultimate G Bagged Upright Vacuum

How do i put the belt on my kirby sentra - Kirby G6 Bagged Upright Vacuum


See my previous detailed posts for a Generation 5 and follow step by step. ... Kirby G6 Bagged Upright Vacuum

I need to replace the belt on my kirby. - Kirby Ultimate G Bagged Upright Vacuum


If this is like my Kirby, there are colored slots on each end that slides the brush in and out and they are different sizes but the belt is connected in the middle. First take the bottom cover off. It should be made out of rubber and metal, and it po ... Kirby Ultimate G Bagged Upright Vacuum

How to belt change on kirby clasic III - Kirby Vacuums


... Kirby Vacuums

I can't turn the belt off of my Kirby vacuum. I had the front off of it earlier to attach the hose, but now when I put the front back on, I can't get the belt to turn off. The lever twists about 3/4 of the way around, but will not go the rest of the way.


Turn the front part to the green so it is level and then twist the front to the red make sure the belt catch the hook as you twist it then if the belt is hooked just put it back on the vac like normal and lock it in place then twist it back to the gr ... Kirby Ultimate G Bagged Upright Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0729 seconds