Having problems with your Vacuums ?

Shark ep 604 no suction? - Vacuums

Answers :

Repair Help & Product Troubleshooting for Vacuums

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

No suction but green light on shark vacuum - Euro-Pro NV22 Shark Navigator Bagless Upright Vacuum

... Euro-Pro NV22 Shark Navigator Bagless Upright Vacuum

Infinity Vaccum by Shark, model number NV31COS, will not start. The vacuum was running just fine until it grabbed the edge of a curtain. Turned it off to release the suction. Turned it back on and was working fine. About a minute later the vacuum was making an odd noise. Every 2 seconds or so it would "heave" (lack of a better word) then go away, then come back and so on. Turned the vacuum off and checked for blockage, none that could be seen or felt, and now the vacuum won't turn. Any suggestio

Carpet brush won't turn when vac on ... Euro-Pro NV31 Infinity Vacuum

My Infinity Shark vacuum has lost suction. The pitch sound changes very soon after turning it on. I believe the lower hose is clogged, and I cannot get the body cove unattached where the hose bends upwards into the chamber. So much for their claim of never losing suction!

... Vacuums

Shark vacuum has a loud suction noise coming from the port on the side of the vacuum

... Shark Navigator Bagless Upright Vacuum

I purchased the SHARK cordless hand vacuum,18 volt SV779Z 14 from Walmart and mailed you its product registration on Nov.3,2010. As I was vacuuming my kitchen countertop ,there was a big bang and it stopped all suction. Walmart told me to get in touch with you since they did not have any more to exchange. I have the sales ticket and did register the product as mentioned before. I need to know what I can do to get a replacement since it was under guarantee. Thank you! Robert Schwarzenberger

... Euro-Pro Vacuums

I have a suction problem with my Shark Navigator vacuum cleaner. I tried to clean it and after trying to put it back together, it lost suction. What can I do go get it working again?

... Shark Helmet NV22L Shark Navigator Upright Bagless Vacuum

I have bought a shark cordless vacuum sv779z 14 from walmart, at first it worked well, but lately the suction is ok when i switch it on, and them immediately decrease until there is almost no suction. I don't know if its the battery or what i need to replace. When i call the customer care number listed on the instruction manual, they say that they don't have the model number on file and that i should call back in 7 days, which i have done several times, what should i do?

... Vacuums

No suction - Infinity Shark Vacuum NV31C

You might try sucking the sose out with another vacum from the wrong way. You might be able to remove the hose and push a broom handle or stiff wire through. If you have compressed air available, you could try that, outside.\015\012\015 ... Euro-Pro NV31 Infinity Vacuum

My Shark Lift Around Vacuum is not picking up items even though it seems to have suction

... Vacuums

Shark vacuum suction

... Shark Vacuums

Shark vacuum suction comming from the side

... Euro-Pro NV350 Bagless Upright Vacuum

Shark power pet upright vacuum blowing air no suctioning, Why?

... Euro-Pro NV22 Shark Navigator Bagless Upright Vacuum

My dyson DC17 will not turn on unless the handle is pulled back.(into the vacuuming position) The attachment hose will not work at all (0 suction thru it). I've checked the hose and made sure there is no obstruction. Any ideas?

Not sure if I can help, but I'll try. The DC17 has two motors: the vacuum motor and a separate motor for the brush bar. It is normal that the brush motor works only when the handle is pulled back in the vacuuming position - that's the way it's made. ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

Suction is suddenly very weak on fully-charged Shark Euro-Pro SV736CR hand-held vacuum. Inserted new bag, so that's not the problem.

... Euro-Pro SV736 Bagless Handheld Cyclonic Vacuum

My suction doesn't work - Euro-Pro NV22 Shark Navigator Bagless Upright Vacuum

This link is for the manual it will show you were to look for blockages on page 13 ,,,please rate if helpedhttp://www.totalvac.com/manuals/Shark_Na ... Euro-Pro NV22 Shark Navigator Bagless Upright Vacuum

No suction - Euro-Pro Shark EP033 Bagless Canister Vacuum

... Euro-Pro Shark EP033 Bagless Canister Vacuum

There is no suction in my vaccumm - Euro-Pro HEPA Shark EP238 Bagged Canister Vacuum

CHECK LIST1. Full or clogged dust bag.\0122. Dirty air input filter.\0123. Wrong pile height setting.\0124. Open suction control.\0125. Hole in hose.\0126. Canister hood openthis link is for the manual ... Euro-Pro HEPA Shark EP238 Bagged Canister Vacuum

No suction - Euro-Pro NV22 Shark Navigator Bagless Upright Vacuum

It is probably stopped up somewhere. Take the hoses and etc. apart and clean them. ... Euro-Pro NV22 Shark Navigator Bagless Upright Vacuum

Shark ep 604 no suction? - Vacuums

... Vacuums

I have a Euro-Pro Shark UV-204. The Vacuum turns on, motor sounds fine, and suction is as strong as ever. Still picks everything up in its path. However, the bristels on the bottom do not rotate around, the belt is not broken or loose. Is there something I'm missing?

... Euro-Pro Shark UV204SH Bagged Upright Vacuum

My vacuum (shark modle #UV210BV) turns on but has absolutely no suction.

... Euro-Pro Shark Professional Upright Vacuum with Bonus StickVac Red Bagless Vacuum

My dyson vacuum cleaner doesn't seem to have the same suction power it used to. I have cleaned out the canister and have taken apart the vacuum head (for cleaning carpets) and it doesn't seem to be blocked but it seems to lose suction by the time it reaches the head. The suction is strong at the end of the hose (where you attach the telescopic attachment with vacuum head) Any ideas? Thanks, Irene

... Vacuums

Need Kirby Generation 3 Vacuum cleaner manual. Vacuum is not picking up dirt from floor. Seems to have enough suction to inflate the bag, but when you check the suction under the vacuum, there seems to be extremely litle suction.

If your brush roll is turning and your bag is not overly full, then the only other thing it can be is a clog where the bag connects to the vacuum. Turn the plastic part out away from vacuum and lift off to see if you have something clogging it. It ... Kirby Generation 3 Bagged Upright Vacuum

No suction I am getting no suction on my central vac at the vac. I do not believe that the piping is plugged up, the vacuum is not creating suction. What are the causes of no suction at the vacuum and how do I take the top half of the Nutone central vac off?

Use the guide at builtinvacuum.com/flowchrt.html to find the issue and solution. Most likely you need to test it without any filter and be sure the bottom of the unit is attached :) To get access to the motors you need to unbolt the very top sides. ... Broan-NuTone CV350 Performance Bagged Central System Vacuum

What causes my Shark Vacuum to work only intermittently?

If the brush roller operation is intermittent, there may be hair jammed inside the end caps. The brush roller can be removed and the end caps also for inspection. Intermittent operation also can be caused by a stretched drive belt.\015\012The per ... Shark Navigator Bagless Upright Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0927 seconds