Having problems with your Vacuums ?

Hoover 20.0 turbo power 4500

\015 My vaccum pickups fine......but the attachment part don't pickup good.\015

Answers :

Split or blocked hose
Repair Help & Product Troubleshooting for Vacuums

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My Hoover Turbo has the power and motor works well but there is no suction power. I have taken all steps to ensure that there is no blockage in the pipes. I live in the Benoni area and would like someone trustworthy to repair my machine as it is only just about 1 year and 9mnths old.

Remove the screws from the funny looking thing on the back (about 10 philips head screws) and remove the blockage from the big hose. Don;t stop working on it until you are absolutely certain there is no blockage. You may need a long screw driver an ... Hoover U5396-900 Turbo Power Vacuum

No power going to hoover have hoover turbo power 3. Plug is sealed but have changed fuse. Have had builders in house using it to renovate bathroom. Do you think it is now passed its sell by date was working until they got it. It dosent even switch on. Am ready to do them an injury as my upstairs is a mess

A Neighbour fixed it ... Hoover Vacuums

Hoover Self Propelled Wind Tunnel Turbo Powered 7600 The thin belt too loose

If this is a "V" belt, make sure the small roller that tightens the belt is ok and not jammed up. It may have to be replaced. Also if the flat belt is stretched at all, it won't work either. ... Hoover U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum

My Hoover Turbo power 4900 does not have enough power to pick up lint off the floor - when I hold my hand up to the attachment, I could say there is not suction - any suggestions?

... Hoover Vacuums

Hoover turbo power 8000 manual - Hoover Self-Propelled WindTunnel Bagless Upright VacuumVacuum

... Hoover Self-Propelled WindTunnel Bagless Upright VacuumVacuum

Replace belt on hoover turbo power 5000 - Hoover Vacuums

... Hoover Vacuums

How to remove turbo power attachment from hoover jovis handheld vacuum cleaner

... Vacuums

Replace on off button on hoover turbo power 5000

... Hoover Vacuums

Brushes not rotating on hoover syeam vac turbo power 5000 LS

... Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum

Hoover turbo power 3200 - Vacuums

... Vacuums

I have a hoover upright bagless - turbo power 6500 The cord has been run over and I just noticed white stuff on the cord where it is tattered. My husband said he saw it 6 months ago and never said anything! Anyway, what is that white stuff in the cord? Is it dangerous in any way? Is it insulation? What is that usually made of? Just concerned since the cord is dragged over the floor and my little boy constantly has his hands and face on the floor. Thanks. Worried mom

It can be potentially dangerous. What you see is the cord insulation, if you move that a little you can see the power wires. They are coated and cannot hurt you if not damaged. If i were you i would wrap it in electrical tape or best thing would to ... Hoover U6616-900 WindTunnel Bagless Upright Vacuum

I need a manual for a hoover turbo power 7000 vacuum (u-6335-930)

... Vacuums

I own a Hoover Turbo power windtunnel 6500 12 amp vacuum, and it doesn't seem to be vacuuming up the dirt. I tried getting all of the hair unstuck from roller at the bottom and looked at the belt, and it's not broken. Is there anything else I can do?

... Hoover Windtunnel Turbo Power U4645-930 Vacuum

Replace belt for Hoover Windtunnel Turbo Power U4645-930 Vacuum

\015\012Great Video Repair on the Replacement of the Hoover Windtunnel Self-Propelled Upright vacuum cleaners below. If you find the video helpful please be sure to rate it by clicking on the thumbs up icon below.\015\012\015\012 ... Hoover Windtunnel Turbo Power U4645-930 Vacuum

Vacuun does not get up dirt into vacuun - Hoover Windtunnel Turbo Power U5761-900 Vacuum

Check all hoses ect for blockages ... see if belt has snapped on roller ...replace if need too. also check filters give them a clen. ... Hoover Windtunnel Turbo Power U5761-900 Vacuum

How do I install a new belt on my hoover 4500 turbo power?

... Hoover Vacuums

How to operate a hoover steam vac turbo power 7000 LS 12 amps

... Hoover F5807 SteamVac Wet/Dry Vacuum

Hello, I have a Hoover 3200 Turbo Power vaccum. while the motor appears to be working fine the vaccum no longer picks up the dirt. I turned the vaccum upside down and the belt appears to be broken. would a broken belt stop the pick up, there appears to be no suction. This vaccum is approximately 10 years old. is it worth fixing? I live in Virginia Beach Va, where would I take the vaccum for repair? my zip code is 23456- Thanks Cleta Goode

... Hoover Vacuums

Trying to fix new belt to Hoover Turbo Power vacuum cleaner. Don't see how the belt becomes taut. Fitting it around the roller, there is nowhere to fit the belt to, it just sits loose.

I looked at the user instructions guide online and saw where the 'other end' of the belt should be fitted. It was extremely hard to fit but eventually managed it. Thanks for this solution site. I wouldn't hesitate to use it again. ... Hoover U5396-900 Turbo Power Vacuum

Lost Manual for Hoover Turbo Power 8000 Wind Tunnel

... Hoover U5453-900 WindTunnel Supreme Bagged Upright Vacuum

Hoover 20.0 turbo power 4500

Split or blocked hose ... Vacuums

Hoover turbo power 1500 have part of bottom off to replace belt but can't find where to attach it? must be more parts to take off but how?

... Hoover Elite U5061-900 Bagged Upright Vacuum

Changing bell on a hoover turbo power 6200

Most Hoovers if you turn the vac over, remove the plate covering the brush roll, then you can get to the belt and brushroll. ... Hoover U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum

Hoover steamvac clean surge turbo power 5200 attachment problems

That part to install in tank, is at the end of your hose. Take the lide off of the dirty water tank, on the front of the tank, there is a block that will slide out, then you can insert that part in its place. You have to have suction to make the br ... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

Hoover turbo power 3100 is loosing suction - Vacuums

The suction that is lost is usually from a plugged up inlet to the filter bag. Check all areas the debries go through for you will find a spot clogged up especially at the bends were it catches all the time causing this problem ... Vacuums
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0557 seconds