Having problems with your Vacuums ?

I don't know how to change the brush. HELP Kirby legend 2 vacumm


Answers :

Http://geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=767761
\015\012Generic problem for all Vacuums
\015\012I don't know how to
\015\012Posted by mcwalworth on Jul 10, 2008
\015\012I don't know how to change the brush. HELP Kirby Legend II vacuums
\015\012
\015\012Hello,
I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service procedure. To change the Kirby brushroll is to dial the belt off of the fan pulley and unlock the head to the bell housing, the head will come off. Then you turn the head over and remove the bottom plate by 2 levers the brushroll will be attached. Remove the brushroll and replace it with the new one with the screw head facing down to the carpet. Replace the bottom plate and install a new belt. The belt install on a Kirby is to raise the height adjustment to the highest level and then dial the belt off counter clockwise so it is loose and not on the fan pulley, release the top lever on the bell housing, then remove the bottom plate and unhook the brushroll on one side, slide the old belt off and then slide the new one on, replace the brushroll with the screws facing the carpet and re-hook the bottom plate on the Kirby. Then take the bell housing and hook that back on to the Kirby and lock it down. Then dial the belt on clockwise all the way and the belt should be on the fan pulley. The belt should be ready to go, plug in your Kirby and then do the step down on the vacuum height adjustment until the tone changes, then try to see id it picks up, if not go one more height adjustment and that should be the correct setting.

\015\012http://kirby.com/
\015\012Customer Service – U. S. & Canada
\015\0121-800-494-8586
\015\012Hours 8:00 am to 5:00 pm (EST)
\015\012Mail To: Consumer Relations
\015\012The Kirby Company
\015\0121920 West 114 Street
\015\012Cleveland, OH 44102
\015\012Thanks, Don the Vac Man
Go Ahead. Use Us.
Repair Help & Product Troubleshooting for Vacuums

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I don't know how to change the brush. HELP Kirby legend 2 vacumm


Http://geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=767761\015\012Generic problem for all Vacuums\015\012I don't know how to\015\012Posted by mcwalworth on ... Vacuums

I have a kirby ultimate g vacumme and i dont know how to use it so i can wash my carpet


The video for the model on the below listed site should be very similar to yours.\015\012\015\012http://www.kirby.com/Portals/0/videos.html\015 ... Kirby Ultimate G Bagged Upright Vacuum

Plug Part # 8191782 on my kenmore vacumm wand is bad, I dont know how to get the wand apart to change it


... Kenmore Vacuums

Sponge filter I have a kirby sponge filter for my Sentria shampoo system and dont know where it goes. It stop working and making foam. Kirby sent me the sponge filter saying this is what i need and i would know where it goes. I dont nor kind I figure it out. please help!!!!!!!


On the end of the shampoo tank where it attaches to back of motor where the bag is normally attached ... Vacuums

I need to know how to change my kirby into a blower?


Raise the light assessory on the front of the vac. Remove the roller assembly by rotating the square dial as indicated by the arrows. Then you must attach the accessory that sort of looks like a 4 inch square open box to the front of the vac where ... Kirby G4 Bagged Upright Vacuum

Kirby G3 I threw out my last bag for my kirby. I have an other model and now i dont know which type I need to get. I have 4 Style #2 bags but they are not the right ones... Help!


Beginning with the G series, G3 and G4 had round openings for the dirt intake. Prior models had oval so they will not fit, so find G3 or G4 bags and you will be set ... Kirby Generation 3 Bagged Upright Vacuum

Hello, Could you send me an exploded view of an engine kirby please? My Kirby vacuum cleaner I think for 1997 I think it is garnet, having wanted to change the coals, I do not know the back, is the cause of my request, I contacted a person previously in Bastogne (Belgium) several times which promised to help me but in vain, I count on your good will so I can reassemble it and use it again. In advance, thank you


Try this site out:www.onlinevacshop.com/kirby-G5-parts-manual.phpGood Luck!Jim ... Kirby G5 Bagged Upright Vacuum

Dont know how to put the shampoo system together on my kirby g6..


Http://reviews.ebay.com/KIRBY-CARPET-SHAMPOOER-INSTRUCTIONS-MANUAL-DIRECTIONS_W0QQugidZ1000000000459499 ... Kirby G6 Bagged Upright Vacuum

DONT KNOW HOW TO CHANGE MY BELT


Http://geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=698891\015\012Generic problem for all Vacuums\015\012DONT KNOW HOW TO CHANGE MY BELT\015\012Posted by m ... Vacuums

Dont know how to change belt on bissell pro heat carpet steamer cleaner


See thishttp://cache.vendaria.com/vpop/VpopV6.html?ct=13&ctname=CT630X556D630X390&fw=630&fh=556&logo=49&fv=10&ap=vnd_bissell_deap_cleaner_how_to&purl=MAIN_bissell_how_to_replace_upright_deep_cleaner_belts&i ... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum

I have a Eureka Altima vacuum. The model number is 2996. I don't think my vacumm is sucking any dust. Plus, it smells like a burning leather. What should I do? I have tried to get help from others and they tell me that I should change the belt. But, I don't know where it is. Please help.


Sounds like the belt for sure. Here is a link with the owners manual. It shows how to get to and change the belt. http://www.eureka.com/index.php?option=com_productdisplay&view=productdisplay&task=getproducts&productid=2&produ ... Eureka Altima Upright Vacuum Model 2996AVS Vacuum

How do i know if my power button is not working on my diamond edition ultimate g kirby vac? It was fine when i changed the water and went to turn back on it does not power on, neither will the button click. please help


Make sure the water reserve all the way on it may not be cliped on all the way ... Kirby Ultimate G Bagged Upright Vacuum

I dont know where to connect the hoses - Kirby G4 Bagged Upright Vacuum


Assuming you dont have the manual, you should try to google " manual for kirby G4" and you should see it there. you also have the option of downloading the manual in PDF format, to be opened with adobe reader, which can be acquired from ... Kirby G4 Bagged Upright Vacuum

I would like to know how to change the transmission on the kirby g-3 vaccum...


Remove the top cover to expose the motor.Flip the vac over and remove the two screws between the drive wheels.The entire power drive will drop from the bottom.Be sure to remove and check the drive belt for wear ... Kirby Vacuums

Dont know how to change the belt on a 1697 bissel powersteamer pro


There is a great video on the Bissell site. 1 min watching it shows you how.Basically you unplug it, take out the tanks, turn it upside down, remove the 2 red clips that hold the brush assembly, and lift the assy out, then replace belts. ... Bissell 1697-7 Powersteamer Pro Deluxe Vacuum

I need to change the belt on my Bissell Pro heat. I dont know how to get to it!


Hi,Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.Bissell Proheat Upright Wet/ ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

MY SANSUI SSP WEIGHING SCALE GETS OVER LOADED WITH MORE THAN 90 GRAMS. INSTEAD OF SHOWING 0.23GMS IT SHOWS 2.3. ITS MAXIMUM CAPACITY IS 10 KGS. I HAVE LOST THE USER MANUAL. AND I DONT KNOW HOW TO CHANGE ITS PROGRAM.


... Vacuums

I dont know how to change a shampoo pump on a bissell shampooer. Do you have instructions for me?


I need instructions how to change a shampoo pump on a 8910 bissel floor cleaner ... Bissell Vacuums

How do i use the shampooer on kirby i have so many parts and dont know wher to begin to put them


I would contact Kirby directly:http://www.kirby.com/Portals/0/contact_us.html ... Kirby Ultimate G Bagged Upright Vacuum

I have a hitachi 1300 upright hoover and dont know how to change sdrive belt


... Hitachi Vacuums

I LOST MY INSTRUCTIONS DISK TO MY KIRBY G SERIES AND I DONT KNOW HOW TO DO ANYTHING WITH IT. I JUST REPLACED MY BELT BUT IT DOESN'T SEEM TO BE WORKING AS WELL AS IT SHOULD.


We have a video, online and printed manuals HERE. ... Kirby Generation 3 Bagged Upright Vacuum

Hello, I need to know how to change carbon motor brushes on a g4 kirby? Thank you.


... Kirby G4 Bagged Upright Vacuum

How do i change carbon brushes on kirby legend 2 cleaner


... Kirby Vacuums

I have a set of avery enterprise basic weighing scales, i need to change the prices and names on each button but dont know how to do it


To involved for typing answer\015\012contact me at [email protected] ... Vacuums

I dont know how to open it to change the bag - Sanyo SC-180 Bagged Upright Vacuum


... Sanyo SC-180 Bagged Upright Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0470 seconds