Having problems with your Vacuums ?

I just bought a new dirt devil vacume today an there was no warranty card in the box to send back only instructions to use it.


Answers :

Http://geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=783056
\015\012Generic problem for all Vacuums
\015\012I just bought a new
\015\012Posted by beckyspuppet on Jul 14, 2008
\015\012I just bought a new dirt devil vacuum today and there was no warranty card in the box to send back only instructions to use it.
\015\012Hello,
I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service procedure. You can always call the Royal factory and they can send you out a warranty card or the cust serv dept can do it over the phone, you would need the brand name, Model # and serial # in order to register the factory warranty. Other wais as a rule you have a one year factory warranty with your customer receipt as proof of purchase or you can call the factory.

\015\012So if you need further assistance, please feel free to contact your local vacuum cleaner dealer in your area or in the yellow pages, or contact the factory phone number or website to further assist you with your questions.
\015\012http://royalvacuums.com/ Customer Service 1-800-321-1134
\015\012Hours are: 8:00 AM to 7:00 PM (EST)
\015\012Thanks, Don the Vac Man
Go Ahead. Use Us.
Repair Help & Product Troubleshooting for Vacuums

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I just bought a new dirt devil vacume today an there was no warranty card in the box to send back only instructions to use it.


Http://geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=783056\015\012Generic problem for all Vacuums\015\012I just bought a new\015\012Posted by beckyspuppet ... Vacuums

We had to take the machine apart just to see that the belt had broken after only 5 use's . We can not see how we are ever going to put the new belt back on. do you have instructions on how to take the belt off and how to put a new one on? Please send me one.


I have a Panasonic MC-V5746 upright vacuum. According to the booklet, \015\012MAKE SURE UNIT IS UNPLUGGED.\015\0121. Place carpet-bare floor selector in "carpet" position.\015\0122. Remove lower plate (there are two screws in the m ... Vacuums

REMOTE CONTROL IS MALFUNCTIONING & NOT TURNING ON CUSHION - Hello. I bought a used (by near new) Shiatsu+ Massaging Cushion from Ebay. When I installed it today the remote control was faulty. When you push the Power button, the blue light comes on, but none of the other buttons work. When you push the Power button again to turn it off, it clicks & turns itself back on again. So it's running but nothing is happening in the massage cushion. I did see a card in the box saying "For the Shiatsu


Before you use this cushion you MUST first 'unlock' the rollers which are held in place by a screw which MUST be removed or the unit will self destruct. The manufacturer provides a hex wrench to remove the shipping screw and a large label on th ... Vacuums

I have a Euro Pro Compact Performer model # EP 171 which I love. It is the best iron I have found for my quilting class. When I went to use it, I found my cats had chewed the cord to the point that it is unsafe. I took it to a repair shop to have a new cord put on it and they told me it had to go back to the factory. I do not want to purchase another iron because it is my understanding this model is no longer made and because I love it. May I send this iron back to the factory to have a new


Hi, you may already have found a solution, but I recently saw this same model iron on ebay! ... Euro-Pro Vacuums

We have no instructions for using this Bissell. It is new and has been in the box about two or three years. We have no instruction booklet. Model numbers are 5288 HAY06271 9.6V DC


Follow the link below to download your manual:\015\012http://www.bissell.com/searchresults.aspx?searchtext=5288&mode=use ... Bissell 52889 Flip-Ease All-in-One Vacuum and Mop Vacuum

My new H2O Mop Ultra (Danoz) seems to heat up ok then when the light switches to green and I start using it, the orange light comes back on as well as the green. Produces steam to start with but then it starts to spit water too and everything ends up wet. Any ideas on whats wrong or should I just send it back?


That is a major hardware fault, I have seen this numerous times with these H2O mop's... They seem to either work perfectly for a long while or have problems right off the bat. You definitely want to send this unit back and either get a refund or at ... Vacuums

Just bought one cant beleive there is no manual or instructions no warranty card no nothing not all pepole have internet so this is not a good thing to me send me all the things i need why they are not with product is the stupidiest thing ive ever seen!


Contact the dealer and insist that he supplies you with the documentation that should have been with the appliance. Don't let him spin you a story, somebody else probably took your copies or he lost them. ... Vacuums

Hoover Model U8185-900 beater bar part keeps smoking and burning up We've replaced the part Hoover PCB Display Bridge U8172 three times and the vac beater bar works for about a minute then the part starts to smoke and burns out again. I've taken everything apart but cannot locate anything that would cause this part to burn up. I think if I did not disconnet immediately, he vac would catch my rug on fire. Help? I didn't send back the warranty card, so I can't get any help from Hoover. Any suggest


I'm not sure why this is happening. Perhaps if you would contact Hoover and explain the problem to them such that it appears that there is a safety issue with their product, they might be more cooperative. If that fails, I have had luck writing let ... Hoover U8185-900 Upright Vacuum

Just purchased new hoover #38846 upright. why when I use hose and attachments,hose will not expand like box and instruction says. MaryLou Polk [email protected]


... Hoover Vacuums

Brand new Shark steam mop out of box - plug in, gets hot but steam won't come out. No steam, just hot mop - should we just give up and send it back?/


Hi,Some types of water will not work, try bottled spring water...Here is a tip that I wrote about the Euro-Pro Shark Steam Mop and why it maynot be getting steam to the head... ... Euro-Pro Shark Steam Mop - Gray/ Purple Vacuum

I'm looking for instructions for. The Kenmore Seal-n-Save Deluxe. It is model 69019. The machine is in excellent (looks never used condition and I have boxes of the bags.) I just can't find the instruction book and my attempts to use it don't work. So my question is simply where can I find the instructions or instruction book. I have food I'd like to freeze. Thanks in advance.


... Kenmore Vacuums

Last year my wife and I bought a new Dirt Devil Reaction All Surface vaccuum cleaner to replace the older Platinum Force. After using it a couple of times the new one gets clogged with dog hair easily and shuts down. I cleaned it out completely including the hepa filter but it will not handle the dog hair. The old one never had a problem and still works. We went back to using the old vaccuum cleaner because we can not find the receipt and had not registered the new one and are stuck with a new 1


Greetings jettin_us,\015\012\015\012Normally you can contact the store you purchased the unit at, and if you paid with anything other than cash, they may be able to retrieve your receipt for you. \015\012\015\012Once you get t ... Vacuums

We need instructions on how to use the shampooer, we did not receive the manual with the vacuum.. Our sales rep took the box with instructions inside as a favor to get rid of the box. Now we do not remember how to connect the shampooer. Can you help? thanks


... Kirby Ultimate G Bagged Upright Vacuum

Have hoover self propelled vac uh60010 new in box but out of warranty.


This video will show you the fix ... Tti Hoover UH60010 WindTunnel Self-Propelled Bagless Upright Vacuum

We have lost our instruction book and need help in using our carpet steamer. The model is. 8805 1. 06272101H.....901G. Please send me any info


Http://www.ehow.com/how_8523226_instructions-steamer-turbo-upholstery-cleaner.html?utm_source=dgmodule&utm_medium=1&campaign=momme1Here's another.http://www.ehow.com/how_7405566_use-proheat-turbo-carpet-cleaner.html ... Bissell ProHeat Turbo Deep Cleaner Upright Steam Vacuum

I have a new Bissell power groom pet, 67E2 that I purchased a while back. It has never been used. I am trying to use the pet tool adapter. Do I disconnect the flex hose (handle end) from the telescoping wand to use the pet tool adapter? And, if so, how do I disconnect them?


... Bissell Powergroom Pet Vacuum

Windtunnel belt I have a new Hoover Windtunnel canister. The belt keeps coming off. It happened a couple weeks ago (several times after putting the belt back on) so I assumed I might need a new belt as it might have dried out at the store. I ordered new belts and today I used it for about an hour and the belt came off again, twice. There doesn't seem to be anything to hold the belt on the stem as it seems to slip off. I have tried it centered, to the left and to the right....can you help. I am v


I've successfully used a compatible belt - Royal 104425001 .It's still new, but for the time being at least - it works. ... Hoover S3765-040 WindTunnel Bagless Canister Vacuum

I got this sewing machine , can anyone tell me what this control box is used for ?. It is mounted under the table in front of the motor,It says Control Box on the front and two push button number settings with can be adjusted up or down from ( 0 to 9 ) ,Next to these settings are two toggle switches. One is marked start with on and off and the other switch is marked end with on and off. Above these switches it it says Back Track . The tag on the box says ( Type LE -BB -24 - 110 - 220, 2


Still struggling with your model number. I understand from the added comment this is a Brother sewing machine. I was hoping to find a manual that would be of assistance. Here is a couple of websites that lists available manuals for Brother sewing ... Vacuums

Bissell 1770 No instructions came with my new 1770. There are three long screws only one of which has a place to screw in---to hold the handle. No instructions on how to use the machine, Help!!


Go to Sears with the model # and they can order a manual and ship it to your home. ... Bissell 1770 Quicksteamer II Upright Vacuum

New Salter Analyser Scale 9149EF. No instructions in the box. Have inserted batteries and both gadgets show life, but neither functions properly. Have looked for instructions on the web - no luck Very frustrating, and spoils Salter's reputation. Please help. Thank you


... Vacuums

I have the dc 17 animal model and there are no instructions in how to use the attachments,how they connect and so on.I have to assume that this is not an uncommon question considering that the box was completely sealed when purchased. Are there instructions that you can download. IMorales


You can call the Dyson helpline for information on how to fit the attachments. Generally, you can fit them on the wand and the hose (wand - directly on top of the red piece of plastic, hose - take the wand off the back of the vac and press the red bu ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

Just had a Bissell Quick steamer Plus model#1950-3 J02117 given to me. I need the instuctions on how to use it, I have no manuel for it. please send me the instructions & a video how to use, thank you


Follow the link provided for copy of User's Guide.\015\012http://www.bissell.com/Sear ... Bissell 1950-3 Quicksteamer Plus Vacuum

I have lost my instruction book on how to use my Kitchenaid countertop oven/toaster etc. It is Model KC01005ER-1. It has 1400 watts, 120AC and 60HZ. I bought it from costco. I would like to down load the instruction book. Please send me the website by email so that I can download the book.


Check out this site.http://shared.whirlpoolcorp.com/product_literature/search.jsp?siteCd=KAD ... Vacuums

I have not used my "Steam Wizard SM420" in a long while and I can't find my manual since moving. Are there specific instructions that I should know and how about a filter, do I need to have a new filter after each use? I don't seem to have any. Thanks. Shirley Young


... Sharper Image Turbo SM420 Handheld Steam Vacuum

MY VACUUM ISN'T PULLING AS STRONG AS IT USED TO SO I THINK IT NEEDS A NEW BELT. I CAN'T FIND THE MANUEL ON IT SO I NEED SOME INSTRUCTIONS ON HOW TO CHANGE THE BELT. I DON'T WANT TO BREAK MY VAC. CAN SOME ONE PLEASE INSTRUCT ME ON HOW I SHOULD CHANGE THE BELT PLEASE. TYPE VAC: EUREKA THE BOSS WHIRLWIND LITE CYCLONIC POWER CANISTER TYPE VAC. THE HANDLE IS DETACHABLE TO CLEAN IN THE CORNER WITH A SMALL EXTENSION.


You can get Eureka replacement belts here:Eureka Vacuum Betls ... Vacuums
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0981 seconds