Having problems with your Vacuums ?

The bar is stuck so I can't get it to stand upright again?

\015 Tried clicking the red bar to reset the grey bar but both seem to be locked into position?\015

Answers :

Please go to web page from Dyson:God bless you

use with common sense.look for your model and proceed
Repair Help & Product Troubleshooting for Vacuums

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

The bar is stuck so I can't get it to stand upright again?

Click the link below for solutionhttp://www.youtube.com/watch?v=JX7axXoYfIcor this one ... Vacuums

I have an Electrolux Commercial Upright vacuum Model U129C. It has a device which turns off the motor driving the beater bar if something gets stuck in it. There is a simple reset button to restart the beater after clearing the obstruction. Just recently on flat dense low pile surfaces the switch cuts in after just a few seconds and turns the beater bar off. This doesn't happen on high pile carpet but the motor doesn't quite sound normal. There is no obstruction - the beater bar can spin freely

The motor is having a problem.There might be two reasons...either the coils inside it got heated up which will be needing rewinding or you can buy a new motor or there r capacitors attached sometimes u can make a check on that also if that's gone Kap ... Vacuums

I'm trying to get my S7000 Miele to stand upright an lock in this position. It wont , i tried to see if foot release was jammed but cant tell it doesnt seem to release to let it move upright an lock in again..help

There is a rear dust cover that sometimes gets stuck, this will make it almost impossible to lock the handle up. First locate the cover which is at the rear right above the wheels. It's about 2"x8" and ribbed vertically and slides up behind the rear ... Miele S7210 Bagged Upright Vacuum

I have a Dirt Devil upright ddup1800 and it is stuck in the upright position. There is no switch or level. You stand on the front while moving the handle backwards to get it to move. However, not today. Help?

... Vacuums

The bottom bar that encases the brush is flush to the floor when using the vacuum. This causes the suction to "stick" the vacuum to the floor (lamenate) and also as there is no ground clearance debris is just pushed around. We have to nearly stand the thing upright to get the ground clearance to be enough for things to start being sucked up. I have taken apart, re-assembled etc and nothing is working.

I'm having the same problem.  The bottom plate is not level with the floor unless the vacuum is nearly in the upright position.  Its like there should be a spring pushing the bottom plate towards the floor.  Anyone know how to fix this ... Dyson DC07 Bagless Upright Cyclonic Vacuum

My Dyson DC25 got stuck and wouldn't return to the upright position, I figured out that one side had jumped the track and gotten stuck in the square hole below the track. I did not want to break the plastic to force it back, so I removed the screw on the right side that was holding the kick stand on and removed the kick stand, also a spring thing came out. Problem is, now I have no idea how to re-install the kickstand. Can't find a technical manual or video anywhere, it can't be very difficul

... Dyson DC25 All Floors Bagless Upright Vacuum

I have a morphy richards upright hoover model 7333 and i cant get to the belt to see if it is either broken or just come off the runners, i have lost my instructions and cant get the things apart to have a look, does anyone know anything about these hoovers? many thanks, Carina.

... Hoover Vacuums

Bissell aroma pro upright carpet cleaner wont push foward keeps getting stuck

... Bissell Carpet Cleaner Powerbrush Deep Cleaner Vacuum

I had a shoelace get stuck in the beater bar. I turned it off, tipped it over and untangled the shoelace from the beater bar. When I plugged it back in the vacuum ran but the beater bar was not turning and there wasn't any suction. Is there a reset switch for the beater bar? Thank you for your help, Janet

Hi Janet. there is a small reset button on the outside of the head next to the brush that you can push to get it to start spinning again. ... Dyson Ball DC24 Bagless Upright Vacuum

Dc07 model, cannot get it to stand fully vertical upright. It is as if something is not sliding back into position right. Don't want to force it in case something breaks. The upright of the cleaner has been dropped from time to time. Any thoughts on sorting it out?. Thanks a lot. M

Hi, Try this quick repair and see if this fixes your Dyson in terms of not going in the upright position: This is a frequent problem that we see come in on Dysons. If this doesn't fix it, please feel free to just use the clarification req ... Dyson DC07 Bagless Upright Cyclonic Vacuum

The beater bar switch on my dyson 24 gets stuck in the off position. I have to push it many many times before the beater bar engages. How can I fix this?

... Dyson DC24 All Floors Vacuum New Upright NEW

I have a dyson DC07. The hose has come away from the hose end and the end is stuck in the top end of the wand as it sits in the upright position on the machine. Any ideas as how to get it out? If I can get it out it might just be a new hose. If not, it's a new hose and wand.t

... Dyson DC07 All Floors Bagless Upright Cyclonic Vacuum

I cannot get my Dyson animal upright hoover to stand upright

There is a video tutorial here: \012\012 ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

The Oreck vacuum kick stand is stuck and won't stand upright

... Oreck XLS700A Upright Vacuum

I can't get my animal Dyson to drop down for the brushes to pick up...it is stuck in the upright position. It is so frustrating that I can't get it to drop to vacuum the floor.

... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

We have a dyson vaccume and what ever makes it stand isnt working. I dont think we did anything wrong. But I cant make it stand.

The steel rod has come out of the groove that makes it go up/bown this video will show you. ... Dyson Vacuums

I have adyson dc04 the cylinder is stuck cant get off to clean it out

... Dyson DC04 HEPA Bagless Upright Cyclonic Vacuum

Dyson DC07 I have just got my DC07 serviced but cannot get it to stand upright - have lost my manual. Your help is much appreciated.

Hi.If you look at the front left side of machine there is a removeable inspection port it will have 2 coloured buttons you press these in & pull it up to remove.Now pull handle back as if vacuuming the floor. Now where the ... Dyson DC07 Bagless Upright Cyclonic Vacuum

How can i get my dyson dc25 to stand up - Dyson DC25 All Floors Bagless Upright Vacuum

Video of what pholefono is talking about ... Dyson DC25 All Floors Bagless Upright Vacuum

Dyson 28 handle is stuck in the locked and upright position. Vac runs fine, just can't get the handle to release to run the vac

How do you remove the air duct (plastic sliding piece) that is making the vacuum stay in locked upright p[position? ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Kenmore progressive upright (direct drive) with bag has low suction and the beater bar does not rotate. Also, it is not obvious how to get inside the vacuum

Hi there,\012First of all you look for a reset button on the motor and press it in with cleaner plugged in and turned on, push the little reset button on the side of the lower base of vacuum. Remember that the brush will not turn in the u ... Kenmore Progressive Bagless Upright with Inteli-Clean SystemVacuum

When I stand my Dyson upright it's noise gets louder and it also happens when I try to use the hose, also the hose does not work?

Hi its Darran at Dyson. From your description, it sounds as though the hose or wand is blocked. Follow the blockage procedure in the user guide or in the Support section on our website at www.dyson.com.I hope that this informa ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

The back wheel carriage is stuck in the lowered, vacuuming position...will not go back into place for the unit to stand upright

Hi its Darran at Dyson. So we can help you resolve this, please contact our Helpline on 0800 298 0298 (UK) or 1866MYDYSON (US).Kind regardsDarran Dyson Customer Service ... Dyson DC25 All Floors Bagless Upright Vacuum

My belt broke on my kirby upright, I took the roller off and put the new belt on, but I cant get the hook to hook on the belt.

On the front of the nozzle is a big knob that you turn to load the belt. Take the nozzle of of the vac, turn the knob to catch the belt, keep turning it until it stops. You will know if the it caught the belt, it will be hard to turn. Put the nozz ... Vacuums

Hair gets stuck in upper filter basket instead of going into the lower basket that you are supposed to empty. It is a Bissell 37604 Lift-Off Revolution Pet Bagless Upright Vacuum Cleaner

Check both filters. If one or other is increasingly dirty, wash or clean it out. Also check the air waves leading to the bagless bin canister part. If one air way is blocked the remaining dirt will try and access the bin other way due to the natural ... Vacuums
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0633 seconds