Having problems with your Vacuums ?
Cant get the bottom plate back onto my dyson upright DCO7i
\015 Plate came off easily brush replaced and working but fixed screws wont catch\015
You need to press hard and turn till they lock in
Repair Help & Product Troubleshooting for Vacuums
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
Cant get the bottom plate back onto my dyson upright DCO7i
You need to press hard and turn till they lock inhttp://www.youtube.com/watch?v=fN8k--LbuCs ... Vacuums
Wont re-assemble I took the bottom plate off to clean out the rotary bush and can not get the plate back on! I think it is the position of the roller but no matter which way I place it when i turn it , it flicks back into the place that means i cant put the plate back on!
Assuming you did not remove the brush roller to clean it and consequently did not reseat it, I am guessing that the bottom plate is not reinstalling as it should. On some uprights, the bottom plate hooks in at the front and is latched in place with c ... Dyson DC14 All floors Bagless Upright Cyclonic Vacuum
Dyson dc07 The rotating brush on the bottom of my vacuum was filled with strings. I removed the brush by undoing all yellow plastic screws from plate. Removed all strings and replaced as best I could and it was hard to get the brush back in and the belt around it. I dont have my manual but it fits so it should be correct....? Right? No, not true, because when I turn it on and try to and vacuum (by lower canister with foot release) it makes that terrible ratching sound). Please help
The loud ratching is a warning to tell you that there is something stopping the roller bar from rotating this is a very common thing lay the machine on the floor front side down take off the bottom plate and just check the belt is in the centre of th ... Dyson DC07 Bagless Upright Cyclonic Vacuum
I cut all of the hair out of the bottom of the spin-brush on the Dyson Upright Animal Vacuum. Now I dont think I can get the brush back in there correctly. If I squeeze it in there (which it is a VERY tight fit...) then it wont spin. Any thoughts?
Check the roller ends for dirt build up, they pull off and you should be able to clean them out.\015\012The roller should just go back into place if pushed together. ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum
Hi I cant get my dyson back into the upright position it will only go three quarters of the way Ive checked for blockages and cannot find anything wrong please can you help
Easy fix watch this video ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum
I have a Kenmore quick clean model 116.36724500 and the belt popped off so we took the bottom off and put the belt back on, but now cannot get the bottom floor plate back on! Please help! :( I have no
The belt wont turn...i cant get in to the inside to check to see if the belt isnt on the roller...how do i get up in there..i took the bottom plate off and you still cant get inside... thx Peggy
The following site has some great info on your machine:\015\012\015\012www.dysonmedic.com ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum
I have an old upright hoover vacuum. I need to change the belt but can't figure out how to get to it. The bottom plate over the roller brush comes off but I can't get anything else off to get to the other end of the belt.
Model no. req ... Hoover Vacuums
I have a windsor vsp 14, it is making a bad grinding noise, when I take the top blue piece off it stops, the brush works fine and when I put the top back on it grinds really loud and gets hot. it still vacuums and the belt and brush are working fine, can't figure it out. and when the lid is on I cant see what its grinding on. It only makes a grinding noise when you pull handle back and engade to vacuum flor and stops when you put it upright.
... Windsor VS14 Versamatic Bagged Upright Vacuum
I have a Dyson Animal upright (purple). I took it apart to clean the cyclone chambers. When re-assembling the bottom closed before the opening rod was inserted. I can't get the opening rod installed with the bottom opening closed. How do I open it? Thanks.
I looked in our DC07. I would try removing the top again and getting a long dowel or the opening rod, insert it down into the unit and PUSH. The opening rod opens the latch by pushing it, not pulling it. Here are some pictures of the latch. Top pi ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum
I also have a Hoover upright and I need to replace the electrical cord. I have dimantled the back, where the tools are stored, and the hose. I still cannot find the screws or whatever, to get to the area behind the cord, so I can replace it. I think I will have to take off the bottom too. Has anyone out there tried to do this? It seems crazy. This machine works great so I hope I can also put it back together. Thanks for the help.
Since I do not know your specific model I can only supply you with general instructions. Be aware that most of the time you only need to gain access to the on/off switch to replace the power cord. Also Make sure that you are replacing the existing co ... Vacuums
The TechDrive Pedal on my Kirby G6 fell out of the back of my vacuum cleaner. I removed the screws from the metal plate one the bottom to try to see if something had come a loose. Can you send me a diagram so I can put it back together or tell me where I can get a service manual. The only part I am having trouble with is the metal piece inside that engages the power drive. Thank you.
The pedal drive fell out . Do you have a manual telling me how to get it together again.. Thanks, Dianne ... Kirby G6 Bagged Upright Vacuum
Trying to get bottom plate off Electrolux upright
Step 1: UNPLUG YOUR ELECTROLUX VACUUM CLEANER.\015\012This is definately a belt change that can get expensive if you break\015\012something. I do not like the idea of a regular person changing this\015\012belt. I've seen people crack th ... Electrolux Cascade 140 Bagged Upright Vacuum
Cant get the bottom lid of dyson dc7 dirt bin to open
Hi there,I am sorry to hear you are having difficulty opening your clear bin. The mechanism that releases the bin base is actually part of your cyclone assembly. When you pull the trigger, a small clip at the bottom of your cyclone releases t ... Dyson DC07 Bagless Upright Cyclonic Vacuum
I pulled the wand out of my dyson ball to hover the furniture and now i cant get it back in what do i do?
Hi there,\015\012\015\012You should be able to resolve this issue by referring to the user guide supplied with your machine. Here's a link which you may find useful if you don't have the user guide to hand: ... Dyson Ball DC24 Bagless Upright Vacuum
I have a dyson DC14. the forward lock came out and I cant figure out how to get it back in. Please help!
... Dyson DC14 All floors Bagless Upright Cyclonic Vacuum
My dyson DC07 upright vacuum makes a loud noise when I turn on carpet mode. I removed he bottom plate and checked the belt and it looks ok
Did you check the roller brush to make sure it was clear of debris? ... Dyson DC07 Bagless Upright Cyclonic Vacuum
Cant get new belt on - Dyson DC07 Bagless Upright Cyclonic Vacuum
Yes, it's a real challenge! You can't help thinking something's going to break, but it will go on. For illustrated guidance, go to www.dysonmedic.com then scroll to the bottom of the page and click on "DC07 belt and brushroll replacement guide".\015\ ... Dyson DC07 Bagless Upright Cyclonic Vacuum
I can't get my Dyson DC25 back into the upright position
... Dyson DC25 All Floors Bagless Upright Vacuum
Cannot get the brush roller back in properly - Dyson DC17 Animal Bagless Upright Cyclonic Vacuum
You could try checking out this video on dyson replacements\015\012\015\012good luck ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum
Got pipe out - can't get it back in - Dyson DC07 Bagless Upright Cyclonic Vacuum
The pipe should have a plastic holder at the bottom of the hose, providing its still in tact.\015\012If it is then do the following:\015\0121 take the wand off the hose so the hose is bendy\015\0122 the plastic holder at the bottom ... Dyson DC07 Bagless Upright Cyclonic Vacuum
Hi there Hi have a Samsung VCU2913 Bagless Upright Vacuum. The wheel at the bottom have a rubber where it is driven by for the brush to clean the floor. Where can I get this, its n new vacuum... now I cant use it. I am in SA , Pretoria
Go back to where you bought the vacuum and ask for a BELT. Take the MODEL # with you and buy 2. Always keep a spare ... Samsung Vacuums
I took the hose off to wash it then after letting it dry overnight I put it back on but Im guessing it there was still a little bit of water in between the grooves which ran to bottom of vacuum and now my dyson gets stuck, sort of like a tight hinge. It vacuums fine but I have to keep pushing it down to the carpet with my foot. How can I fix this problem?
Lubrication at the pivot points ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum
The upright lock and spring has come out of my dc14 dyson vacuum. How do you get it back where it belongs?
... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum
I can't get my dyson upright to click back up into position???
... Dyson DC07 Bagless Upright Cyclonic Vacuum