Having problems with your Vacuums ?

Brush won't spin when carpet cleaner is running

\015 \015

Answers :

See this causes and fix it. God bless you
If the vacuum cleaner brush is not spinning, the brushroll bearing might\012 be jammed. Try removing the brushroll assembly and cleaning all hair, \012string, lint, etc. from the brushroll bearing. If that doesn't solve the\012 problem the brushroll may need to be replaced.\012
If the vacuum cleaner brush is not spinning, the brushroll assembly \012itself might be jammed. Try removing the brushroll assembly and cleaning\012 all hair, string, lint, etc. from the brushroll bearings. If that \012doesn't solve the problem the brushroll may need to be replaced.\012
If the vacuum cleaner brush is not spinning, the brushroll itself might \012be jammed. Try removing the brushroll and cleaning all hair, string, \012lint, etc. from the brushroll bearings. If that doesn't solve the \012problem the brushroll may need to be replaced.\012
If the vacuum cleaner brush is not spinning the cogged belt might be \012broken, stretched out too much, or might have fallen off. Check the belt\012 and replace as needed. \012
If the vacuum cleaner brush is not spinning the drive belt might be \012broken, stretched out too much, or might have fallen off. Check the belt\012 and replace as needed. \012
If the vacuum cleaner brush is not spinning the belt might be broken, \012stretched out too much, or might have fallen off. Check the belt and \012replace as needed. \012

9_28_2012_11_18_24_am.jpg
Repair Help & Product Troubleshooting for Vacuums

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a Bissell Pro Heat 2X carpet cleaner and the brushes spin, then stop. I turn it off and when I re-start, the brushes do not spin until I push foreward. The it spins and stops again. Both belts are tight. The brushes spin if held above the carpet, but upon contact with carpet it stops. Same thing on a hard surface.


The reason for the brushes to stop when it is above any surface is there is a switch in the handle that stops the brushes so it dont burn your motor up it may have a faulty switch. ... Bissell Carpet Cleaner Powerbrush Deep Cleaner Vacuum

MY WIFE BOUGHT THIS FOR ME FOR FATHERS DAY GIFT ABOUT ALMOST 2 YEARS NOW OR SO,BUT I HAVE THIS PROBLEM THAT THE BRUSH DOS'NT SPIN ANYMORE EVERYTIME I PUT THE SWITCH ON FOR BRUSH ON,THE HOSES BRUSH SPIN IS WORKING BUT FOR THE FLOOR CARPET BRUSH SPIN IS NOT WORKING,AND THIS IS THE MODEL NUMBER OF MY HOOVER VACUUM CARPET SHAMPOO CLEANER IT'S F7411-900


This unit uses a turbine assy to turn the brushes. The brushes could have something jamming them. Remove the brush unit, it is held on 2 spring hooks 1 on each side. The brush unit is driven thru a 1/4" square post, only one brush is driven and it dr ... Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum

Brush won't spin when carpet cleaner is running


See this causes and fix it. God bless youIf the vacuum cleaner brush is not spinning, the brushroll bearing might\012 be jammed. Try removing the brushroll assembly and cleaning all hair, \012string, lint, etc. from the brushroll bearing. If that ... Vacuums

Brushes wont spin on scrubber - Tti Hoover F7452-900 Max Extract All-Terrain Carpet Cleaner


... Tti Hoover F7452-900 Max Extract All-Terrain Carpet Cleaner

Dirt devil vacuum cleaner--trouble vacuuming dirt and pet hair on carpeting --is the problem with the spinning brush which contacts the floor,  not contacting the carpeting??  I thought (when I bought this vacuum) that the aforementioned brush was adjustable to various heights of carpeting.  Sometimes, it seems like nothing is being vacuumed up --unless I have just put a new bag on the vacuum... Do I need or can I replace the spinning brush on the bottom of the vacuum so it kicks up and vacuums


Try replacing the belt. Rubber belts stretch out after about a year. ... Dirt Devil CE6100 Featherlite Upright Vacuum

My carpet cleaning brush does not turn on. The vacuum cleaner works fine but the the carpet cleaning attachment does not get any power so the light does not come on & the brush does not spin


... Kenmore 25512/ 25513 Progressive Canister Vacuum

Dc07 problem I have a dc07 cyclonic vaccum and like this model,however, for some reason,it has been very dificult to push and pull for the past month or so. i have completely cleaned the brush assembly,cleared any obstructions in the hoses,and, cleaned the filter.I also checked the belt tension,wich i thought was fine but to no avail.Be advised that the brush assembly is spinning and suction is excellent. It just feels like the brush drags along the carpeting. this is a great vacuum cleaner and


The dyson uses two belts, one from the motor to a clutch and then from the clutch to the brush roller, the belts that they use are not much better then any other belt ( those you should change yearly ) but you cant just change the belts you have to c ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

I have a Hoover steamvac Dual V carpet cleaner Model No. F7427-900. This is a spin scrub upright. My brushes will not work. We think the white square that the brushes fit up into in the center of the brushs is not turning. Can you help me.


You are on the right track! Place a screwdriver (flatbladed) into the white drive square and try to turn it. If it is locked up the drive assembly is your problem. It is very common for these parts to lock up because of the moisture involved with ... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

No suction power ,brush wont spin on carpet power nozzle. When it


You need to replace the belt that turns the brush. ... Hoover S3765-040 WindTunnel Bagless Canister Vacuum

I have a Hoover spin scrub carpet cleaner and the brushes won't spin?


... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

My hoover spinbrush heated carpet cleaner has brushes that will not spin, how can i fix the problem? i have tried everything to get them to work. the circle thing in the middle will not even spin.


... Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum

Brush heads don't spin - Bissell Carpet Cleaner Powerbrush Deep Cleaner Vacuum


Your belt is broken. Remove the sole plate to access. Parts available at FixYa.com advertiser, your apliance parts or auto parts place or www.repairclinic.com ... Bissell Carpet Cleaner Powerbrush Deep Cleaner Vacuum

Brush does not spin - Bissell Carpet Cleaner Powerbrush Deep Cleaner Vacuum


... Bissell Carpet Cleaner Powerbrush Deep Cleaner Vacuum

The brushes on my Hoover steam spin carpet cleaner will not spin.


Clean the small TURBINE filter under the clear plastic housing. If that doesn't work remove the brush assembly and see if the drive is turning. If not, you can easily access the turbine(and gear assembly) to examine components. My $5 flea market un ... Hoover F5906-900 Upright Steam Vacuum

I have a Eureka The Boss Mini (Model # 442) vacuum cleaner. It is not working properly sometimes Today I did a cleaned the roller brush thoroughly and powered it on to see if it spins at all. It spins only in Carpet model, but stops sometimes. Please can you tell me what could be the problem?


... Electrolux Vacuums

My brushes wo't spin on my spin vac dual v carpet cleaner


Solution: Remove the clear plastic cover located in front of the brush control switch (I used a butter knife). Locate the small screen and remove the dirt and hair from it with your fingernail or an old tooth brush. Restore the cover and you should b ... Hoover Steam Vac Dual V w/ SpinScrub Vacuum

Hoover steamvav, spinscrub carpet cleaner, brushes won't rotate or spin


... Hoover SteamVac Spinscrub 50 Carpet Cleaner

Hoover steam carpet cleaner brushes dont spin


There is a plastic cover over the spinner indicator. If you take the plastic cover off there is also a little filter in that area (almost like the spinner is on the floor and the filter is on the wall). If you clean this filter it may start working ... Hoover F5872-900 SteamVac Wet/Dry Vacuum

Bissell aroma pro upright carpet cleaner wont push foward keeps getting stuck


... Bissell Carpet Cleaner Powerbrush Deep Cleaner Vacuum

Red spinner wont spin. ( Bissell carpet cleaner )


... Bissell Carpet Cleaner Powerbrush Deep Cleaner Vacuum

Have Hoover F7452900 spin vac carpet shampooer and brushes won't spin. The screen by the brushes is clean and they are place in position to clean on carpet. I noticed that when I have the brushes out of the machine and turn it on that the white square that is on the base of the machine does not spin--this is where part of the brush connector fastens to make bristles spin.


... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

Hoover WindTunnel S3765. The motor spins and the belt turns when I turn the brushes on, and the brushes will spin. The problem is that when I do this on carpet, the brushes stop spinning. As soon as I pull the "head" off the carpet, the brushes spin again. It's almost as if the vacuum suction is too great. I took the head apart and watched the motor turn the metal spindle that the belt rests on, and the belt turns as well.


The belt is stretched and needs replacement.(Belt # 38528036) . The brush is not turning against resistance. ... Hoover Vacuums

I have a hoover steamvac dual v carpet cleaner it's only maybe 2 weeks old and already the brushes won't spin


One cause is that the recovery tank lid isn't on correctly and not sealing. If there is a foam filter on the inside of the lid, make sure it has a 1/4 in. gap from the top of the lid. There is another filter, from the bottom, it has a red frame, pu ... Hoover Vacuums

Hoover F7431-900 my carpet shampooer/steam vac was working fine until the brushes at the bottom of it just miraculously stopped working. they wont spin at all. Is this a motor problem? perhaps a water flow problem? please write back if you can be of any help. thanks


If the screen is not dirty, and the flapper valve to the turbine inlet is open, then the problem is mostly a stuck turbine impeller. The turbine impeller on my F7431-900 has seized TWICE!! The shaft for the turbine is not made of stainless steel, t ... Hoover F7431-900 SteamVac Vacuum

Hoover spin brush model f5914-900 wont draw water back out of carpet


Please remove the recovery tank and check and see there is a black rubber ring seal on the large vacuum tube that rises from the base to meet the bottom corner of the recovery tank. This rubber seal may have fallen off the tube and be found laying u ... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1034 seconds