Having problems with your Vacuums ?

Bissell - bissell platinum 2 proheat powersteamer 1699 p

\015 Hello,\015\012I borrowed this unit from a friend and cleaned it to\302\240familiarize\302\240myself with it and downloaded the manual.\015\012\015\012I filled the bladder filled and the soap tank. I started the unit and when I push the handle trigger no solution comes out. could there be a clog somewhere?\302\240\015\012\015\012I checked the flow meter screen it was very clean like it never saw any solution.\015\012\015\012I also did what you suggested and removed the inspection door for the pump belt and it was ok however when I started the unit with the inspection off to see if I could see\302\240fluid\302\240travel down the tube, I confirmed it did in fact show fluid moving. It appears the pump is working, any other thoughts?\015\012\015\012Anthony\015

Answers :

Hard to determine for sure without the model number. Does water squirt out of the hose? If it does then the heater in the heater in the handle may be clogged, if you model has this. Is the top cover and bottom together at the back of the cleaner, if not then water can't flow from the tank, and is the gasket on the valve on the bottom of the tank? Other wise it could be a bad pump.
Repair Help & Product Troubleshooting for Vacuums

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Bissell - bissell platinum 2 proheat powersteamer 1699 p


Hard to determine for sure without the model number. Does water squirt out of the hose? If it does then the heater in the heater in the handle may be clogged, if you model has this. Is the top cover and bottom together at the back of the cleaner, ... Vacuums

How to remove and attach the brush on a bissell proheat powersteamer platinum ii


it's VERY important to do a lot of cleaning of the Bissell after each use, more than the manual tells you to do. Clean the bottom of the unit. Empty all the water. Thoroughly rinse out both water container pieces. Unscrew the three clear plast ... Bissell Vacuums

Bissell proheat powersteamer platinum 11 owners manual


... Vacuums

I need a manual for a Bissell ProHeat Powersteamer, Platinum II


... Vacuums

Tubing for bissell proheat - Bissell 1698 PowerSteamer ProHeat Upright Wet/Dry Vacuum


Normal\012 0\012 \012 \012 \012 \012 \012 \012 MicrosoftInternetExplorer4\012 \012\012\012\012\012\012 /* Style Definitions */\012 table.MsoNormalTable\012\011{mso-style-name:"Table Normal";\012\011mso-tstyle-rowband-size:0;\012\011mso-ts ... Bissell 1698 PowerSteamer ProHeat Upright Wet/Dry Vacuum

My Bissell 25A3 ProHeat wont spray water - Bissell 1698 PowerSteamer ProHeat Upright Wet/Dry Vacuum


I had two problems. No water was coming out of the main unit (it was working fine via the powerbrush) and the flow indicator wasn't spinning. Because I'm out of warranty, I did two things (after trying all the options that were posted).\015\012 ... Bissell 1698 PowerSteamer ProHeat Upright Wet/Dry Vacuum

My bissell proheat wont disperse water - Bissell 1698-1 PowerSteamer ProHeat Plus Upright Vacuum


Hi,Here is a tip that will give you all the information you need to fix your Bissell Proheat Vacuum Problem.B ... Bissell 1698-1 PowerSteamer ProHeat Plus Upright Vacuum

Hi I own a Bissell Proheat Powersteamer pro-tech with a turbobrush. I have been using "bissell multi-allergen removal formula for carpets and upholstery." I ran out of that last night. Today I went to walmart looking for more. Everything I found said "2x Ultra Concentrated Bissell multi-allergen." I'm confused on where to add the cleaner. I have a water tank and a separate soap tank. The instructions on this new cleaner bottle say to add 4 capfuls for the formula tank and dilute with hot tap wat


Hi,Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.Bissell Proheat Upright Wet/ ... Bissell 1697-7 Powersteamer Pro Deluxe Vacuum

Bissell Powersteamer Proheat 1698 has rusty motor fan


Hi,Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.Bissell Proheat Upright Wet/ ... Bissell 1698 PowerSteamer ProHeat Upright Wet/Dry Vacuum

Bissell Powersteamer Instructions - Bissell 8910 ProHeat Clear View Upright Vacuum


... Bissell 8910 ProHeat Clear View Upright Vacuum

Bissel carpet cleaner soap not dispensing - Bissell 1698-1 PowerSteamer ProHeat Plus Upright Vacuum


... Bissell 1698-1 PowerSteamer ProHeat Plus Upright Vacuum

Bissell power steamer delux model 1631W - Bissell 1631 PowerSteamer ProHeat Canister Vacuum


... Bissell 1631 PowerSteamer ProHeat Canister Vacuum

My bissell does not **** up water very well - Bissell 1698 PowerSteamer ProHeat Upright Wet/Dry Vacuum


Hi,Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.Bissell Proheat Upright Wet/ ... Bissell 1698 PowerSteamer ProHeat Upright Wet/Dry Vacuum

Bissell 1698-p proheat powersteamer instruction manual


Hi,Here is a tip that will give you all the information you need to fix your Bissell Proheat Vacuum Problem.B ... Bissell 1698 PowerSteamer ProHeat Upright Wet/Dry Vacuum

Power cut out during cleaning - Bissell 1698-1 PowerSteamer ProHeat Plus Upright Vacuum


1 could have hit the thermal shut off. if it gets to hot they shut off, or it could be the cord some times they just go bad or it could be something else. Good Luck! ... Bissell 1698-1 PowerSteamer ProHeat Plus Upright Vacuum

Bissell 1698 PowerSteamer ProHeat Upright will not work. The brushes spin, the soap comes out, but no water is getting to the carpet.


Bissell 1698 PowerSteamer ProHeat Upright will not work. The brushes spin, the soap comes out, but no water is getting to the carpet.\015\012 \015\012You may try the trigger assembly may not be releasing ... Vacuums

Water does not dispense from tools and hose - Bissell 1698 PowerSteamer ProHeat Upright Wet/Dry Vacuum


That always happens to me to!! i know it stinks haha, well the problem is your hose is probobly filled up with debree or you didnt set the knob to tools. if it still dosent work take it to a shop, ... Bissell 1698 PowerSteamer ProHeat Upright Wet/Dry Vacuum

I need an instruction manual - Bissell 1631 PowerSteamer ProHeat Canister Vacuum


Type your vaccumn type into a search engine and ask for an instruction manual...it will most likely send you to the company website where you can view it, or you can write the company and ask ... Bissell 1631 PowerSteamer ProHeat Canister Vacuum

Need instruction manual - Bissell 1631 PowerSteamer ProHeat Canister Vacuum


Http://www.fixya.com/support/r4964670-get_manual_most_any_electronic_device ... Bissell 1631 PowerSteamer ProHeat Canister Vacuum

Brushes won't turn - Bissell 1698 PowerSteamer ProHeat Upright Wet/Dry Vacuum


I did not read the entire manual, but I believe this should help you find your problem. http://ne ... Bissell 1698 PowerSteamer ProHeat Upright Wet/Dry Vacuum

Not letting water out of vacuum - Bissell 1698 PowerSteamer ProHeat Upright Wet/Dry Vacuum


If it is not pumping water out of the vacuum that means that the pump belt is worn. Here is a link to the belt you need and a manual you can view: ... Bissell 1698 PowerSteamer ProHeat Upright Wet/Dry Vacuum

Model#7901-h where do all the hoses go? - Bissell 1698 PowerSteamer ProHeat Upright Wet/Dry Vacuum


... Bissell 1698 PowerSteamer ProHeat Upright Wet/Dry Vacuum

I have a Bissell powersteamer proheat. The problem is that the unit will no longer spray water/cleaner out of the bottom of the unit.


Check to see if water will squirt out of the hose, if it does, then take the handle apart, the heater may be clogged. Once you get to the heater, take off the 2 water lines, dig out the clog, try to blow thru the heater to make sure it is open, then ... Bissell 1698 PowerSteamer ProHeat Upright Wet/Dry Vacuum

Belt removal Bissel PowerSteam ProHeat


First take off the cover on the left side oif the top cover, then turn it over, remove the screw holding the red lock and pull the cap and brush roll out, remove the cap, remove the cogged belt, then you can put the new pump belt thru that slot, put ... Bissell 1698 PowerSteamer ProHeat Upright Wet/Dry Vacuum

The belt p/n 0100623 broke - need instructions on how to replace it - we have Bissell ProHeat Powersteamer


I just replaced mine last night. 1) take off the top belt cover. 2) take the water and cleaning solution tanks out then lay the unit on the side so the bottom of the cleaner is facing you (water and solution may leak out so you might want to do this ... Bissell Vacuums
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0367 seconds