Having problems with your Vacuums ?

DYSON DC07 STANDARD UPRIGHT HANDLE WON'T GO BACK

\015 THE BIT ABOVE THE BRUSHES THAT YOU PUSH DOWN WITH YOUR FOOT TO RELEASE THE UPRIGHT HANDLE TO START VACUUMING DOESN'T RELEASE THE HANDLE. I'VE TO FORCE IT DOWN WITH MY FOOT WHICH OBVIOUSLY ISN'T RIGHT.\015

Answers :

Repair Help & Product Troubleshooting for Vacuums

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

DYSON DC07 STANDARD UPRIGHT HANDLE WON'T GO BACK


... Vacuums

Placing the handle of my Dyson DC07 into its upright and locked position causes the beater bar to stop turning. It will not start turning until the handle is first lowered to the working position and the Carpet/Bare knob is moved to the Bare Floor position and then back to the Carpet position. Then the beater bar turns until the handle is placed into the upright position. What might be the problem?


Hi its Darran at Dyson.The brush control is designed to switch the brush bar off automatically when you stand the machine back into the upright position. It is designed this way to protect any delicate floor surfaces when you have the ma ... Dyson DC07 Bagless Upright Cyclonic Vacuum

I need the part # for a Dyson DC07 handle - Dyson DC07 Bagless Upright Cyclonic Vacuum


Hi there the part number for the DC07 handle is 904247-49. \012if you are in Australia you can get these from vacuumspot.\012Happy Vacuuming! ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Cant lower handle on my dyson dc07 - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

My dyson d17 will only stay on if the handle is tilted back and it's not sucking at all....although it's running. When i stand the vacuum up with the handle upright, it cuts off.


... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

Cannot put handle on dyson - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


Hi,Did you receive the handle with the wand already attached? It should be. Then, to get it into the hose pres the wand release button on the end of the hose and slide the wand into the hose. The wand should then be pushed into the slot o ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Dyson wont turn on and its a bit smelly - Dyson DC07 Bagless Upright Cyclonic Vacuum


It sounds like the motor has overheated and has now been irrepairable damaged. The motor has a built in over-current trip to protect itself (and you if it seriously overheated and caught fire). This normally automatically resets itself, however ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Dyson animal dc 24 spinbrush wont spin - Dyson DC07 Bagless Upright Cyclonic Vacuum


... Dyson DC07 Bagless Upright Cyclonic Vacuum

Dyson hose on handle clogged - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


Take hose off and push broom handle through to clear the blockage this link will show you how to take hose offhttp://www.youtube.com/watch?v=6W0W4Rj3dkM ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Wont click back into upright position - Dyson DC07i Bagless Upright Vacuum


... Dyson DC07i Bagless Upright Vacuum

Base of the hoover wont stay on the floor - Dyson DC07 Bagless Upright Cyclonic Vacuum


Check or replaced Upright Lock Assy\015\012part no:908821-01 ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Hard to push wont pick up - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


Hi David,I'm sorry to hear you're having difficulties with your DC07. If the machine doesn't seem to be picking up as well as usual, there may be a blockage in the machine - the filter may also need a wash.To locate and remove any blo ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

How to put roller back on vacuum - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


More info required which vacuum you have etc ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Brush wont revolve - Dyson DC07 Bagless Upright Cyclonic Vacuum


Hi there, There are a couple of reasons that the brush bar will not spin on a Dyson DC07. 1. The carpet / hard floor selector is set to hard floors. 2. There is material wound around the brush to the point that it is jammed ... Dyson DC07 Bagless Upright Cyclonic Vacuum

I cut all of the hair out of the bottom of the spin-brush on the Dyson Upright Animal Vacuum. Now I dont think I can get the brush back in there correctly. If I squeeze it in there (which it is a VERY tight fit...) then it wont spin. Any thoughts?


Check the roller ends for dirt build up, they pull off and you should be able to clean them out.\015\012The roller should just go back into place if pushed together. ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

Brush wont spin - Dyson DC07 All Floors Bagless Upright Cyclonic Vacuum


Hi there VacuumGuru here. The key things to check are roller brush bearings, belt and clutch. It is a li ... Dyson DC07 All Floors Bagless Upright Cyclonic Vacuum

My Dyson will not turn on unless I pull the handle back. I have take the entire vacum apart cleaned all blockage and it still will not turn on in the upright position.


... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

Currently my dyson does not work when in the upright position. When I pull the handle back, it will run, but the suction is not very good at all. I tried washing the filter, but that didn't work. Sometimes it works for awhile, but then the problem occurs after the machine has been used for awhile. What do you think the problem is?


Hi its Darran at Dyson.It sounds as though the brush bar may not be turning properly when you put the machine into the upright position. To test, lie the machine on its side in the vacuuming position (head released) then switch it on and ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

Dyson vacuum I have a DC07 vaccuum. The problem I am having is that the front does not want to stay down as I vaccuum and I continuously have to keep stepping on the front to make it go back down to the floor. It seems as though there is either not enough weight in the front or possibly the unit just has to be broken in so that there is not so much resistance between the handle and the front of the vaccuum. Could there be something I did not remove or is this typical on these vaccuums?


There is some thing broken it is two plastic cogs they help the front go down and stay up you will have to get a star screw driver and there should be two screws on top and two at the b ... Dyson DC07 Bagless Upright Cyclonic Vacuum

The vacuum is spitting dirt out the back - Dyson DC07 Bagless Upright Cyclonic Vacuum


... Dyson DC07 Bagless Upright Cyclonic Vacuum

Handle vacuum no suction - Dyson DC07 Bagless Upright Cyclonic Vacuum


Hi there, \012I have made a video of the two most likely causes for lack of suction in the handle of your dyson DC07. Watch t ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Loud grating/rattling noise comming from dyson dc04 when ever hovering upright as soon as i angle back the handle to push it. the belt has not come off, the roller is rolling and not jammed. sucks ok from the flexible hose.


... Dyson Vacuums

Got pipe out - can't get it back in - Dyson DC07 Bagless Upright Cyclonic Vacuum


The pipe should have a plastic holder at the bottom of the hose, providing its still in tact.\015\012If it is then do the following:\015\0121 take the wand off the hose so the hose is bendy\015\0122 the plastic holder at the bottom ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Handle will not stay in up right postion - Dyson DC07 Bagless Upright Cyclonic Vacuum


... Dyson DC07 Bagless Upright Cyclonic Vacuum

Electrical short in handle - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


When you say there's a short in the handle, this can really be one of two things. It can either be the switch, or the cord. Here's a link to repair that I did on how to replace the switch on your Dyson DC07: ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0639 seconds