Having problems with your Vacuums ?

Have a dyson dc07, the belt snapped on it, changed the belt & now the rollers are constantly turning in upright position... Any advise


Answers :

Repair Help & Product Troubleshooting for Vacuums

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Have a dyson dc07, the belt snapped on it, changed the belt & now the rollers are constantly turning in upright position... Any advise


... Vacuums

Placing the handle of my Dyson DC07 into its upright and locked position causes the beater bar to stop turning. It will not start turning until the handle is first lowered to the working position and the Carpet/Bare knob is moved to the Bare Floor position and then back to the Carpet position. Then the beater bar turns until the handle is placed into the upright position. What might be the problem?


Hi its Darran at Dyson.The brush control is designed to switch the brush bar off automatically when you stand the machine back into the upright position. It is designed this way to protect any delicate floor surfaces when you have the ma ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Dyson dc07 brush not turning belt is intact? - Dyson DC07 All Floors Bagless Upright Cyclonic Vacuum


DC07s have two drive ... Dyson DC07 All Floors Bagless Upright Cyclonic Vacuum

DC07 brush does not turn - belt intact - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


Hi there, The problem is likely to be \012a) The selector on the front of your machine is set to hard floors\012b) The ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

I have the Eureka 4870 "The Boss" Smart Vac. The beater bar began to turn constantly and can't be shut by moving the Brush Roll Contol to Bare Floor position or the machine to the upright postion. It has also eaten two new belts. A local tech says he has seen this problem whereby the free-wheel assembly that makes contact with the belt to engage the beater bar is misalgned and cannot disengage. It is usually the chassis which would mean replacement of enough parts that would not be worthwhile


... Eureka Smartvac 4870 Bagged Upright Vacuum

I have a dyson dc07 upright which no longer picks up lent and hair. The roller brush is not spinning when the vacuum is turned on. How can I tell if it is the belt that needs to be replaced or the clutch and belts?


Need replaced Clutch Assy and Brushbar \015\012\015\012Clutch Assy part no:900252-04\015\012\015\012Brushbar Assy part no:904174-01\015\012\015\012try cleaning all Hose\015\012 ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Bottom wheel won't turn and belt is on - Dyson DC07 Bagless Upright Cyclonic Vacuum


Hello,When a Dyson DC07 roller brush does not spin, it can only be caused by one of two problems.The Dyson DC07 uprights use a\015\012 clutch mechanism to control the brush spinning when you change the \015\012floor / carpet s ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Seems the belt is not turning. what to do ? - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


\015\012Flip the unit over and turn it on. If you physically see it turning then the belt is fine. If it is not then you might have to have your clutch replaced ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

My dyson DC07 upright vacuum makes a loud noise when I turn on carpet mode. I removed he bottom plate and checked the belt and it looks ok


Did you check the roller brush to make sure it was clear of debris? ... Dyson DC07 Bagless Upright Cyclonic Vacuum

My machine (Hoover Wind Tunnel - bagless) is only 1 yr. old. The agitator brush doesn't turn all the time. I know it's not supposed to turn when in the upright position. However, it only seems to work when I have the setting on high. When I stop, but have not put the machine in the upright position, it stops again and then slowly starts moving. Could the V-belt be worn out already? In the owner's manual it states that this belt is not normally replaced. The exact same thing happened with my old


Sounds like you should do two things:\015\0121- Remove and clean the beater brush of all debris as best you can. At the end of the brush you will see a hard rubber piece, at both ends, that holds it in place in the body of the vacuum.\015\012Add som ... Hoover Self-Propelled WindTunnel Bagless Upright VacuumVacuum

Belt not turning, it is not broken - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


The shaft that makes the belt spin is most likely not spinning. Take it into a vacuum shop ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Brush doesn't turn and belt apears good - Dyson DC07 Bagless Upright Cyclonic Vacuum


If your unit has a large knob on the right side of the cleaner head as you hold it when cleaning then your unit has a clutch this clutch has two belts in it so the brush belt may appear ok but the motor belt might be broken it is not an easy repaer ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Belt not turning on carpet mode - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


Hi, you say belt not turning on carpet does this mean the belt is turning if you tip the vac onto its back does the brushes then spin round as normal, if this is the case then this means that all you need toy do is get a replacement belt these can be ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Replace belt for dyson upright - Dyson DC07 Bagless Upright Cyclonic Vacuum


DC07s have two belts - one connects the output of the motor to the clutch, the other connects the clutch to the brush bar.I suspect the belt ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Dyson DC07 turns off - Dyson DC07 Bagless Upright Cyclonic Vacuum


... Dyson DC07 Bagless Upright Cyclonic Vacuum

Dyson DC01 will not lock in upright position - Dyson DC07 Bagless Upright Cyclonic Vacuum


... Dyson DC07 Bagless Upright Cyclonic Vacuum

How do you change a belt on a dyson DC07 - Dyson DC07 Bagless Upright Cyclonic Vacuum


Turn vacuum over so you can see the brush.\015\012Using a standard screwdriver, undo the three fasteners just behind the brush.\015\012Remove the base plate.\015\012Remove the belt.\015\012Remove roller brush.\015\012Pla ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Dyson will not lock in the upright position - Dyson DC07 Bagless Upright Cyclonic Vacuum


There is a video guide here for this: \012\012 ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Change belt on dyson dc07 animal - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

How do I change belt on dyson DC07 - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

My dyson dc01 fan belt keeps breaking - Dyson DC07 Bagless Upright Cyclonic Vacuum


Ok 1st check that the roller is free to move otherwise it will stress the belt..next no sharps on roller guide or brush roll to cut into belt..Please leave feedback ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Dyson Animal handheld brush not turning - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


Hi its Darran at Dyson.We would recommend checking it for a blockage and a removing any hair or fibres from the brush bar. As the brush bar relies on the suction power of your machine, it would be worth cleaning the filter and ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

How do you change a belt on a dyson 07 - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


You want this part.http://www.sparesaverusa.com/vacuum-spares/dyson/dc07/dyson-dc07-parts/belt-changing-tool-for-dyson.html ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

How do you change the belt on a dyson DC 07 - Dyson DC07 All Floors Bagless Upright Cyclonic Vacuum


DC07s have two belts - one connects the output of the motor to the clutch, the other connects the clutch to the brush bar.I suspect the belt you ar ... Dyson DC07 All Floors Bagless Upright Cyclonic Vacuum

Dyson wont turn on and its a bit smelly - Dyson DC07 Bagless Upright Cyclonic Vacuum


It sounds like the motor has overheated and has now been irrepairable damaged. The motor has a built in over-current trip to protect itself (and you if it seriously overheated and caught fire). This normally automatically resets itself, however ... Dyson DC07 Bagless Upright Cyclonic Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0842 seconds