Having problems with your Vacuums ?

How do i change the belt of a 3rd gen. kirby???


Answers :

Http://geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=852715
\015\012Generic problem for all Vacuums
\015\012How do I change the
\015\012Posted by leopardgirl1 on July 29, 2008
\015\012How do I change the belt of a 3rd Gen. Kirby???
\015\012Hello,
I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service procedure. The belt install on a Kirby is to raise the height adjustment to the highest level and then dial the belt off counter clockwise so it is loose and not on the fan pulley, release the top lever on the bell housing, then remove the bottom plate and unhook the brushroll on one side, slide the old belt off and then slide the new one on, replace the brushroll with the screws facing the carpet and re-hook the bottom plate on the Kirby. Then take the bell housing and hook that back on to the Kirby and lock it down. Then dial the belt on clockwise all the way and the belt should be on the fan pulley. The belt should be ready to go, plug in your Kirby and then do the step down on the vacuum height adjustment until the tone changes, then try to see id it picks up, if not go one more height adjustment and that should be the correct setting.

\015\012So if you need further assistance, please feel free to contact your local vacuum cleaner dealer in your area or in the yellow pages, or contact the factory phone number or website to further assist you with your questions.
\015\012http://kirby.com/
\015\012Customer Service – U. S. & Canada
\015\0121-800-494-8586
\015\012Hours 8:00 am to 5:00 pm (EST)
\015\012Mail To: Consumer Relations
\015\012The Kirby Company
\015\0121920 West 114 Street
\015\012Cleveland, OH 44102
\015\012Thanks, Don the Vac Man
Go Ahead. Use Us.
Repair Help & Product Troubleshooting for Vacuums

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

How do i change the belt of a 3rd gen. kirby???


Http://geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=852715\015\012Generic problem for all Vacuums\015\012How do I change the\015\012Posted by leopardgirl1 ... Vacuums

I have owned my kirby sentria for 2.5 years and have had no problems until now. The vacuum still works but I cannot lower it all the way down or the light will turn off and it will start to smell like something is burning inside. I use it on the 2nd or 3rd setting with no problem. I have changed the belt and cleaned all the hair and strings that were on the roller but it still has this problem.


Kirby has a 3 yr back to base guarentee so contact ur local rep or kirby direct and thy will sort it all from there, hope this helps :) ... Kirby Vacuums

Kirby G4D belt change . haven't changed the belt in years ! not sure who it goes on, or around the the spool housing ??


Changing belt on Kirby is a bit complicated. Kirby Co. just did not make it easy for their customers. You have to be careful when installing the brush roll back. Brush roll end caps have to be put back a certain way. For detailed instructions with pi ... Kirby G4 Bagged Upright Vacuum

How do I change the belt on my KIRBY CLASSIC OMEGA 1 CB ?


... Vacuums

Changing a belt on kirby G6


I have written an online guide to help with this issue. Click on the link to view the guide.\015\012\015\012 \015\012\015\012 ... Kirby G6 Bagged Upright Vacuum

Belt I need instrucions on changing the belt on a Kirby Ultima?


Go herehttp://reviews.ebay.com/CHANGING-THE-BELT-ON-A-KIRBY-G3-G4-G5-GSIX-ULTIMATE-G_W0QQugidZ10000000003720039Rob ... Kirby Ultimate G Bagged Upright Vacuum

How to change belt on kirby heritage vacuum - Kirby Heritage II Vacuum


... Kirby Heritage II Vacuum

Change the belt on a Kirby - Kirby G4 Bagged Upright Vacuum


CHANGING THE BELT ON KIRBY G3 G4 G5 GSIX ULTIMATE ... Kirby G4 Bagged Upright Vacuum

How do i change my belt on the kirby g6 - Kirby G6 Bagged Upright Vacuum


Hello,For detailed, step by step instructions (with pictures):http://www.goodvac.com/articles.asp?id=143Hope this helps! Ple ... Kirby G6 Bagged Upright Vacuum

How can I change the belt on the kirby vacuum shampooer brush roller. There is no way to snap the roller out and it seems that trying to unscrew the end isn't doing anything either.Model 5584 renovation group is what is written on the shampooer attachment. The kirby is a heritage model 2HD - purchased in the late 1980's.


... Kirby G6 Bagged Upright Vacuum

How to change belt on kirby heritage 2? - Kirby Heritage II Vacuum


... Kirby Heritage II Vacuum

How to belt change on kirby clasic III - Kirby Vacuums


... Kirby Vacuums

How do we change the belt on our Kirby Vacuum Cleaner


Here is a link to a video explaining how to change the belt on a Kirby vacuum. It is at the bottom of the pagehttp://www.totalvac.com/videos/kirby-vacuum-cleaners-videos.htm ... Kirby Heritage II Vacuum

Kirby tradition belt change


This video will give you full instructions ... Vacuums

How do I change the belt on the diamond series kirby vacuum


Http://www.kirby.com/Portals/0/videos.htmlThis web page has a video that will show how to change the belt. ... Kirby Vacuums

Changing belt on Kirby Classic 1972


When you turned the knob, did it turn easily or hard. If it was easy, then the knob part inside did not catch the belt. If it did turn hard, when you had the brush roll off, did you check the ends to see if they turned easily or not. if not, then r ... Vacuums

How do I change the belt on my Kirby G 2000 Limited Edition?


Lift the head two pedal clicks off the carpet.Lift the headlight and you will find a silver thumb dial to remove the carpet head. At the front of the head there is a square dial which you must rotate to release the belt if not broken. Rotate th ... Windsor SR12 Sensor Bagged Upright Vacuum

How to change kirby vacuum belt? - Vacuums


Greetings,\015\012\015\012Here's a video where we show you how to replace the suction fan on a Kirby Generation vacuum cleaner (also known as the impeller blade). I hope this video helps; ... Vacuums

Need to change the belt on my kirby model 519, assuming this is the problem since the beater bar is not turning and I can smell burning rubber


The beater bar is jammed--usually from thread, string, and hair that is wound up on the bar and particularly on the bar end bearings. The bearings themselves usually require cleaning and re-oiling. The belt may be damaged sufficiently to require repl ... Vacuums

Changing the belt on a G4 - Kirby Vacuums


Here is a link I actually found thru Ebay which was surprising to me and it explains how to change the belt on a g4, g5 and g6 model so looks as if the belts are the same on all of the models:http://reviews.ebay.com/CHANGING-THE-BELT-ON-A ... Kirby Vacuums

How to change g5 belt - Kirby G5 Bagged Upright Vacuum


1)First, you turn the square belt lifter on the front of the power nozzle until the red arrows line up (belt off) \015\0122)Remove the power head from the front of the machine. Now turn\015\012the belt lifter the other way and line the green ar ... Kirby G5 Bagged Upright Vacuum

How to change belt on the kirby ultimate g series diamond edition?


Hi There,\015\012\015\012Here's a very helpful video that we've shot showing you exactly how to replace the belt on a Kirby Generation series, including your Ultimate G. The video also shows you how to perform basic maintenance on your ... Kirby Ultimate G Bagged Upright Vacuum

I need instrution on how to change the belt on my kirby 4 power


You have to be more spicific on the model but: if you take off the front nozzle by loosen the nozzle lock, make sure the name kirby is horizontal, loosen the latches at the back of the nozzle un hook the rugplate located at the bottom of the nozzle. ... Kirby G4 Bagged Upright Vacuum

Belt change? - Kirby Heritage II Vacuum


Here is the belt you need:Kirby Replacement Belt ... Kirby Heritage II Vacuum

How do you change the belt on the kirby sentria


Http://geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=722171\015\012Generic problem for all Vacuums\015\012How do you change the\015\012Posted by erikh_85 on ... Vacuums
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0667 seconds