Having problems with your Vacuums ?

Kirby dual sanitronic

\015 I need help with replacing the belt\015

Answers :

\015\012Generic problem for all Vacuums
\015\012Kirby dual Sanitronic
\015\012Posted by shelly_vando on July 30, 2008
\015\012I need help with replacing the belt
I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service procedure. The belt install on a Kirby is to raise the height adjustment to the highest level and then dial the belt off counter clockwise so it is loose and not on the fan pulley, release the top lever on the bell housing, then remove the bottom plate and unhook the brushroll on one side, slide the old belt off and then slide the new one on, replace the brushroll with the screws facing the carpet and re-hook the bottom plate on the Kirby. Then take the bell housing and hook that back on to the Kirby and lock it down. Then dial the belt on clockwise all the way and the belt should be on the fan pulley. The belt should be ready to go, plug in your Kirby and then do the step down on the vacuum height adjustment until the tone changes, then try to see id it picks up, if not go one more height adjustment and that should be the correct setting.

\015\012So if you need further assistance, please feel free to contact your local vacuum cleaner dealer in your area or in the yellow pages, or contact the factory phone number or website to further assist you with your questions.
\015\012Thanks, Don the Vac Man
Go Ahead. Use Us.
Repair Help & Product Troubleshooting for Vacuums

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a kirby dual sanitronic '50' and want to make it blow. Is that possible?

... Kirby Vacuums

Kirby dual sanitronic

Http://geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=854322\015\012Generic problem for all Vacuums\015\012Kirby dual Sanitronic\015\012Posted by shelly_vand ... Vacuums

I have a Kirby Dual Sanitronic '50' Vacuum Cleaner I bought in 1966. The motor does not start when I attach the belt lifter of the rug nozzle. When I remove the rug nozzle and detach the belt from the motor fan shaft the motor starts when I depress the nozzle switch and the power switch . Seems like the brushes in the motor are worn out. I do not have a manual for this unit. Can you assist me as to what newer unit is this compatible to and the problem I'm having at present??

... Kirby Vacuums

Instructions to replace the belt on my Kirby Dual Sanitronic 50 vacuum. this is the belt that drives the brush.

... Vacuums

My Kirby Dual Sanitronic 80 is squealing.Is it possible to fix this at home?

... Kirby Vacuums

Kirby dual sanitronic 80 vaccuum belt installation

... Kirby Vacuums

What belt do i need for a kirby sanitronic vacuum?

... Kirby Vacuums

How do you change the belt on a kirby sanitronic 7 vacuum cleaner

... Vacuums

I have a Kirby dual santronic 50, and two wires have been pulled out of the safety switch. the two remaining are green and yellow, and the two loose wires are red and yellow. What is the correct sequence? Thanks!

Throw it in the trash ... Vacuums

How do you remove a Kirby Dual Santronic 80 cloth bag?

... Vacuums

Kirby Sentria I bought my kirby sentria just before we were to move house and although I have the instructions somewhere, they will be boxed up and I so want to clean the carpets before I move. Problem is that I don't know whether the belt should be on or off when using the big silver front with the Kirby insignia on it. I know that the green light should come on when it is working properly and it does not, so I am doing something wrong. I can attach the attachments no problem but I want to use

If the green light is off, then its time to replace the band. This video shows you how. ... Kirby Ultimate G Bagged Upright Vacuum

It's been awhile since I have used my shampoo system on my Ultimate G series Kirby. Well, as instructed I took it apart and cleaned it. Now I can?t figure out where to put the ?screen cap? and ?sponge filter?. I have my manual in front of me and the only place it shows the filter and sponge (page 35 in the manual) is when it?s been taken apart to clean. It doesn?t show where to put it back. I don?t know what I would do without all the pictures in the Kirby manual. HELP! Thanx. Visual Kirby Vacuu

Hello,\015\012The littlew round screen goes in the hole where the hose attaches to the tank. The round foam filter goes up in the hole underneath the on/off valve for the foam. Here is a guide if you need any more help...\015\012\01 ... Kirby G6 Bagged Upright Vacuum

Kirby Manual I can't find my manual and I need to know how to use the handheld shampooer part of my Kirby. It is the Kirby Sentria. Can you halp? Thanks~ Naomi

The spray gun instruction HERE but be very careful - try shampooing in an inconspicuous area first. This is essentially as if you would buy some of those " ... Kirby G6 Bagged Upright Vacuum

Kirby Vacuum Hi Bruce, In my opinion, yes the Kirby would be worth it, as long as you are not replacing the motor. The switch would be the most expensive part besides the motor that would need to be replaced. The switch costs USD 49.99, the cord is roughly $39.99, and the carbon brushes are $29.99. I can easily walk you through any of these repairs should you need help. Kirby's are great vacuum cleaners, that usually last 30+ years. Brand new these machines sell in the US for $1600 or more,

You can get better prices from Goodvac.com ... Kirby Generation 3 Bagged Upright Vacuum

I have what I thought to be a Kirby Classic Omega that is in excellent running condition and looks great. I love it and have been using it for years, but it is recently going through an identity crises! I looked on the identification plate under the motor while cleaning it and discovered that the ID sticker says it's a Kirby Classic III. How can this be when every part of my dear kirby is Omega brown? There is not a hint of Red or Rosewood! Is there another way to determine the actual model b

The Kirby Omega was made from 1973 to 1976.The classic III 1976 to 1979When in for repair the case (motor cover) from a Classic could be put on the Omega. This happens in repair shops if the teck. has two apart at the same time and was no ... Vacuums

I have a Kirby Generation 3. The handle spring assembly is broke, so I took it apart to get a part number. Can you tell me if there is a cross reference or something on these parts. I am unable to find a part with the same number that is located on the part I took off. The number on this spring assembly shows Kirby HA-670289B K-1. Any help finding this part is appreciated.

... Kirby Vacuums

New Kirby I own the new Kirby Ultimate Diamond Edition..G Series and the brushes are running OK and everything but it seems to be blowing things out and not picking them up. Can you help me. My serial number if 7051201028

Is the bag emptor all of the way on? It will blow out if it isn't, But being new, you must have a number to call, it is under warranty so they should be able to help you out. ... Kirby G5 Bagged Upright Vacuum

Kirby shampooer how do i use my kirby shampooer . it was brought to my house but no one showed me how to use it .

Http://geeksquad.fixya.com/ThreadView.aspx?prdid=11557&thid=612593\015\012Kirby shampooer\015\012Posted by wyatt8696 on May 21, 2008\015\012How do i use my Kirby ... Kirby Ultimate G Bagged Upright Vacuum

How to belt change on kirby clasic III - Kirby Vacuums

... Kirby Vacuums

Kirby how to put on kirby belt

Take the nozzle of, remove the brush roll, put the new belt over the brush roll, re-install and put the bottom plate on, making sure that the belt is in the middle of the brush roll. Turn the big knob on the front until it locks, when it grabs the b ... Kirby Ultimate G Bagged Upright Vacuum

Kirby sentria I have a kirby and the belt is on, however it has very little suction. I am unsure what to do.

You have to make sure the green light is on.. in the corner .. and if it is that means its working properly. If you have no suction then it is usually the belt and or the bag. so make sure your bag is not full , make sure everything is attatched pro ... Kirby Ultimate G Bagged Upright Vacuum

Kirby Sentria I just got done usting the carpet shampoo system and now my Kirby wont start

When you replace the outer bag assembly, you have to make sure that it is turned clockwise untill it fully stops. There is a small switch on body of the Kirby that is only engaged when the bag assembly is installed correctly ... Kirby Ultimate G Bagged Upright Vacuum

Kirby My Kirby is less than a year old.  It's suction is no longer strong. I tried cleaning the hose and even replacing the bag.  Do you have any other suggestions.  By the way, I have the Sentera model.  Thank You

Here is a link to my online troubleshooting guide. Hope it helps...\015\012\015\012http://r ... Kirby Generation 3 Bagged Upright Vacuum

Kirby Manuals Where can you get kirby Tradition 3cb manuals at

You would have to find someone who sells and services Kirby, you may find it online. But this an older vacuum and doubt that you will find a manual for it. ... Vacuums

Kirby vacuum I have a G 6 kirby vacuum. The power cord has been checked and has continutity and replaced the power switch and the vacuum will still not run

There are 2 safety switchs, one on the front that the nozzle activates, and one on the side that the bag asembly activates. The motor brushes and/or armature maybe bad. ... Kirby Ultimate G Bagged Upright Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0363 seconds