Having problems with your Vacuums ?

Model DC24. The brushbar does not revolve

\015 I have checked for blockages but nothing found. The appliance was purchased 20/04/2012 and is used just once a week in three quite small rooms. The 2 pin connection seems OK\015

Answers :

The motors are very weak in the head, red reset button as the side hold down for 20 seconds to reset motor.
Repair Help & Product Troubleshooting for Vacuums

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Model DC24. The brushbar does not revolve


The motors are very weak in the head, red reset button as the side hold down for 20 seconds to reset motor. ... Vacuums

I have a Bissell Proheat model 7901. When I pull the trigger on the handle, there is no water flow. The brushe revolves and the unit vacuums any water spilled on the floor. Could it be a failed pump or kink hose or ? Thanks Zap


Take the handle apart and put spring back into place. ... Bissell Vacuums

The beater brush on my Hoover windtunnel model u8174-900 won't revolve. The belt looks OK. How can I fix this problem?


Help wont pickup blows out ... Hoover U8147-900 WindTunnel V2 Bagless Upright Cyclonic Vacuum

My Animal Dyson (the purple one) is making strange noises. The ball will not roll. I've taken it apart and put back together and it works for a couple minutes and then it won't work again I think it's Model DC24 or 25. Pretty sure its 24.


... Dyson Ball DC24 Bagless Upright Vacuum

For a dyson manual for the floor model dc24 - Dyson DC14 All floors Bagless Upright Cyclonic Vacuum


User manuals can be downloaded from www.dyson.com but Dyson service manuals are apparently unavailable anywhere. ... Dyson DC14 All floors Bagless Upright Cyclonic Vacuum

Brushbar has stopped spinning on Carpets


Because the brush bar is electric, it automatically shuts off if you get something stuck in it to keep the motor from burning up. you have to remove the item and then push the small reset button on the side of the brush bar<!-- from fixya rte --&g ... Dyson Ball DC24 Bagless Upright Vacuum

Dyson dc24 motor stops when brush bar switched off


... Dyson Ball DC24 Bagless Upright Vacuum

I have a craftman shop vac model 500A , 5GAL.,1.25hp. why does Sears say that's not the model num. IT'S THE ONLY MODEL NUM. ON IT!!! IF IT'S AN OLD MODEL,WHY DONT THEY SAY IT IS THE SAME AS MODEL#***** AND WHY DOESEN'T THE FILTER,BAG'S ect.SAY, WILL ALSO FIT MODEL 500A


... Craftsman 17765 Canister Wet/Dry Vacuum

Eureka Model 4351 vacuum - motor runs but no sction.


I saw this kind of vacuum on a sidewalk, someone didn't want it anymore. I checked it out and it wasn't sucking from the motor brush. I check the small hose at the lower rear of the unit and it was totally clog. I cleaned it well and it was working a ... Vacuums

Dyson dc24 roller brush stopped spinning


... Dyson Ball DC24 Bagless Upright Vacuum

Where can I get a replacement glass lid for Rival crock pot model #3100/2? The one listed below is out of stock, but, even if it were, it will not fit my model. Any suggestions? "Buy-it-now-store.com" lists: CURRENTLY OUT OF STOCK, NO ETA. # Rival Crock Pot Lid Replacement Glass for 3.5 Quart Rival Slow Cookers - $5.99 Rival Crock Pot Slow Cooker Replacement Round Glass Lid Cover # Works with Rival Crock Pot Models: 3100, 3101, 3102, 3103, 3130, 3133, 3120, 3250 # Approximate total


... Vacuums

Whirlpool drinking water cooler 79R1.Leaking. can't find manual.bought years ago-maybe 8-10. listed as 79R1. Model WHAC5008GA. (does not say model #, just model). Serial # 0509010496


You may have to contact the manufacturer directly. Whirlpool never made any water coolers. Whirlpool water coolers were, at least at one time, manufactured under license by a company called Kemflow International LLC. This is a company based in Tai ... Vacuums

I have aquick wash shampooer the model before the 1770 I need to replace the push rod kit and the capinsert assembley.Are these still available or WILL THE 1770 MODEL PARTS FIT THIS MODEL.


I am not exactly sure which model you have. The following link is for upright models:\015\012\015\012http://canada.bissell.co ... Bissell 1770 Quicksteamer II Upright Vacuum

I have vax 1800 pet vacuum. It is picking up fine but very noisy. I have replaced the belt in the past and the noise started then. On looking at it closely today I noticed brushbar was getting worn where it slots in at the side so I suspect it wasn't fitted in properly after replacing the belt. Now in properly but still making terrible noise. There is a bit of a rubbing noise when brushbar moved round. Do you think the brushbar needs replaced? How do I lubricate the bearings to try that bef


Spray the end of the brush-bar were the bearings are with WD-40 if that solves the problem replace the bearing when it starts screeching.. ... Vacuums

I have a tear in the hose of my old model # F6030-900 unit which doesn.t allow water from the attachment to **** back into dirty water bucket. The model #F6039-900 is the same model # but different year I understand. The tear is at the bottom where set the recovery tank in the lay down position and can look in the unit at the bend of the hose.


You will have to replace the hose asm. You can order online at: \015\012http://vacuumsuperstore.com/F6019.html\015\012\015\012H-90001334 (43 ... Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum

Where can i buy parts for the model C151D vacuum. any place i checked does not have that model of electrolux listed. i need the power wand attachment. i ordered one that looked like it from sears parts direct but it wasn't the proper one and they do not list the model C151D


Any Aerus Electrolux store. For the one nearest you, check the below link and follow the directions. Keep in mind that if it's too far away, they do ship. If you're close enough, they do deliver.\015\012This model is not the same company tha ... Electrolux UltraLux 2000 Bagged Canister Vacuum

I've lost the mixing blade for my Hitachi Bread Machine, model # HB-B102. The blade model # is 101-901-900 (I believe). Apparently that model is no longer available. Is there one from another bread michine that would work? Judith Miller-Smith


Here is a link to a paddle for your bread machine. ... Hitachi Vacuums

SEARS KENMORE CANISTER VACCUM, Model No. 107-23050, Volts 120AC, Type AV, Hertz 60, Amps 11: This is a small model vaccum with an on/off switch on the canister. The on/off switch has gone and the vaccum can only be used by plugging and unplugging it. I am looking for the replacement on/off switch part but Sears Kenmore has no listing for this vaccum or parts. I can't recall just how long ago it was purchased but could be 10 years (or more). As this model is perfect for the application neede


... Vacuums

On the piece that covers the brushbar and motor (the clear plastic piece that has the dyson logo), it looks like a small plastic ridge that holds the cap for the brushbar snapped off. Would too much wobbling of the brushbar cause it to turn on and off? The switch seems fine.


In theory, yes. If the brushbar isn't held firmly, then the belt isn't running smoothly which puts more strain on the motor. This can cause the motor to get hot very quickly which will trip the thermal overload protection. \015\012\015\01 ... Dyson DC15 All Floors - The Ball Bagless Upright Cyclonic Vacuum

Hoover Bagless Hello,      My Hoover bag less (Model U5280-900) is not picking up dirt like it should.  The brush roll is spinning fine, but the bristles on it are only about one quarter inch long.  I am wondering how long they should be.  The vacuum is quite a few years old.  Do you think it is time to replace the brush roll.  Could you email me at [email protected] about this topic.  The product bar below did not contain my model no.  The correct model no. is above in my message.  Thanks


If the belt is more than six months old then change it even if it is not broken. then replace your filters if that doesnt work than check the hoses for a clog drop a marble down them and make sure it comes out. ... Hoover U5753-900 WindTunnel Bagless Upright Vacuum

I own a self-propelled Hoover Wind Tunnel vacuum cleaner (Model U6425-920). I do now have an owner's manual and was wondering how to clean the Hepa filter on this model (*this model uses a vacuum cleaner bag also).


Http://geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=794479\015\012Generic problem for all Vacuums\015\012I own a self-propelled Hoover\015\012Posted by goh ... Vacuums

The belt on my vacuum cleaner model 6596 bissel powerforce bagless turbo keeps breaking. As soon as I put on a new belt and start it up the belt snaps. It is the durabelt meant for this vacuum model. Also, my son has been having the same problem with his. He has the same model and same belt. This problem is occurring even after a thourough cleaning.


I would guess you aren't centering the belt correctly, thus it's edge is caught between the brush and another solid object, causing the breakage.\015\012When you get the belt on the the brush and the brush back in place, turn the brush a few ti ... Bissell 6596 Bagless Upright Vacuum

Power cord can not find replacement power cord for power brush attachment on kenmore canister vacuum, model #2491290 power brush attachment model # 5491290. i can not even find those model #'s anywhere online, not even partsdirect.com. any help would be great. thanks, david


Call 1-800-948-1358 ask for Buck mon.-fri. 9am-5pm est sat.9am-1pm est ... Vacuums

I have a model 1561 electrolux central vac..can i use a hose and accessories from a model 15448 model electrolux central vac to compliment my central vac unit


If the hose fits into the inlets, then there should be no problem. ... Electrolux Centralux Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0354 seconds