Having problems with your Vacuums ?

Kenmore elegance: how do I open it up to change the belt?

\015 My vacuum roller head does not turn, think it might need a new belt but can't seem to open the thing to get at the inside.\015

Answers :

A picture is worth a thousand words, so the diagrams in this manual should be helpful:..
35622 Owner Manual
Repair Help & Product Troubleshooting for Vacuums

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Kenmore elegance: how do I open it up to change the belt?

A picture is worth a thousand words, so the diagrams in this manual should be helpful:..35622 Owner Manual ... Vacuums

Change the belt in my kenmore power-mate 120 amps...how to open it to get to where the belt is???


I cannot get the Kenmore power-mate open to change the belt? How does it come apart?

... Kenmore Vacuums

Trying to change belt in kenmore 3116890 upright vacuum cleaner model116. Can't open vac

... Kenmore Vacuums

How to change a belt on a kenmore elegance upright show video

... Kenmore 34612 Bagged Upright Vacuum

How to change belt Kenmore Progressive 300?

... Oreck XL2200 Bagged Upright Vacuum

Change belt How do I open the power head to get to the belt to change it?

... Beam Rugmaster Plus Belt

How to change the belt for kenmore heavy duty plus extra wide sweep model no. is 1163966180 looking for manual how to change the belt

... Vacuums

I am smelling a faint burning rubber smell and I think the belt needs changing, but I can't figure out how to open the case to change the belt. Can you help me?

... Hoover U5068-900 Sprint Upright Vacuum

I have a kenmore grab n go bagless and I need to know the exact size of the belt, I lost the manual, and I have burn several belts at the bigining of the problem the motor stops and burn the belts I open it and I think it was a little piece of plastic, that cause the problem, but when I put the new belt it looks like the motor works fine,but still burn the belt, I'm using UB-1 #5275 belt am I using the wrong one?

... Kenmore 34722 Grab-N-Go Upright Vacuum

Changeing belt how do you install a new belt? I have an Eureka, The Boss, bagless, upright. The brush is hardly rotating. I think it could be the belt but i cannot open the vacumm to check it. How can I fix this?

... Vacuums

I can't seem to get the belt cover off of my Kenmore Progressive 400. There are two buttons that say above "belt and bulb change" but the buttons do not move. Do you know how I can remove so I can put a new belt on? Thank you!

You have to take off the top of the power nozzel that has the light lense. There are two pressure locks,one on each side. Use a screw driver to release. You will see the screws.Take the two screws out and on some models, there are two pressure locks ... Kenmore 23612 Progressive PowerMate Bagged Canister Vacuum

How do i change my Kenmore upright vacuum belt?

... Kenmore 33721 Upright Vacuum

How to open it to change belt

... Vacuums

Need to change belt on hoover upright model u5093-900, but can't figure out how to open it up to get at the belt.

... Hoover Vacuums

My question earlier today referred to a Kenmore Progressive upright vacuum. Your answer suggested that I change a belt, if the reset button did not work. Does a direct drive really have a belt? Regards, Jim Buckley

Direct drive does not have a belt. It is a shaft with gears. What is wrong with your vaccum? Maby i can help. ... Kenmore Progressive Bagless Upright with Inteli-Clean SystemVacuum

Belt I have a Kenmore canister vacuum and I need help changing the belt

You probably need a phillips screwdriver to Remove the screws on the bottom of the vacuum and pull the brush bar out _ the belt is wrapped around one end of that and anchored to the vacuum - put new belt on and replace cover on bottom by replacing th ... Kenmore Vacuums

I cannot open and replace belt on Kenmore Model 116 (594299900) BELT ( 20-5285

The manual is here and there are diagrams on page 17 and 18 showing how to access and replace the belt.http://www.hammerwall.com/Manuals/Kenmore/Description/116.20612003/Kenmore%20Canister%20Vacuum%20Cleaner%20Manual/L0705059/I hope ... Kenmore 25512/ 25513 Progressive Canister Vacuum

I have a kenmore vacuum cleaner that I bought a new belt for butcannot get the bottom off to change the belt. Model # 116 53312305

... Kenmore Vacuums

I've got a Kenmore canister vacuum, Progressive 236123, and there's a burning smell from the belt side of the head--smells a lot like hot rubber. I've cleaned the agitator and changed the belt, but I still get the smell. It's stronger when I'm using "carpet" mode than when I'm using "bare floor" mode. Any ideas what the problem is?

... Kenmore 23612 Progressive PowerMate Bagged Canister Vacuum

The hose works great, but the head of the vaccuum does not pick up anything !!! I checked every opening that may have been clogged, but nothing came up. When I hold my hand under the brush/roller, it seems to be putting out more air than intaking air. Particles "dance" on the carpet, but don't get "sucked up" into the vaccuum ? I have had the vaccuum only 1 year, so the brushes should not be a problem. I changed the bag, and checked the belt. The belt and brushes seem to be OK. ?

Hi there,Uprights are notorious for debris forming clogs when changing direction. The 90 degree turn where the base suction goes up. Have a closer look . You may need to pull the base plate off to access the blockage.Best reg ... Hoover U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum

How to open the hoover DM4526 to change the belt

There are normaly5screws 3in the front 2in the back remove these and the bottom should come off pull the brudh off repace belt on to brush put brush back in to seating pull brush on to drive and re,asemble ... Vacuums

How do you change the belt on a Kenmore Model 31164 vacuum

... Vacuums

Remove powerhead case on Kenmore #116 53500300C to change belt

... Kenmore 25512/ 25513 Progressive Canister Vacuum

How to change the vacuum belt on a kenmore heavy duty plus model number 203966180

... Kenmore Vacuums
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0470 seconds