Having problems with your Vacuums ?

Polti steam cleaner problem

\015 Hi...There are two buttons with lights on my steam cleaner. The green one is coming on fine but the yellow one that heats up and generates the steam is not coming on?\015

Answers :

Here is a site where you can obtain information or service for your equipment. There is no online support that I can find.
\015\012Good luck to you.
Repair Help & Product Troubleshooting for Vacuums

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a Polti Vaporetto 910 steam cleaner with a iron attachment. Now the problem is the iron gets hot but no steam comes out. Please help

... Polti Vaporetto 2400 Canister Steam Vacuum

Polti Vaporetto I have a problem with my steam cleaner. Cannot get steam to come out, and the big valve at the top just keeps turning in both directions. So can't empty it. I have'nt got an instruction manual either as it was given to me. Any suggestions!!! Terena

Dear Terena \015\012\015\012Had the same problem with a polti vaporetto 1500 ( vtt 1500 ) after butchering the big valve on the top I realised that the problem was that there was a blockage in the black pipe that comes from the machine to ... Polti Vaporetto 2400 Canister Steam Vacuum

My polti steam cleaner is leaking steam when it reaches its ready stage. i believe that the threads on the safety cap may be worn . can i get a replacment part for this problem

... Polti Vaporetto 2400 Canister Steam Vacuum

Polti steam cleaner problem

Here is a site where you can obtain information or service for your equipment. There is no online support that I can find.\015\012http://www.polti.it/eng/index.htm ... Vacuums

Is there a recall on the Euro-Flex Monster 1200 Handheld Steam Cleaner, because steam build-up, but does not release, when pressing down on the trigger? How safe is this machine, and how many consumer has bought this machine, and having problem? And why hasn"t there been a repair kit, or something been sent out by the "Company", to solve the problem?

... Euro-Flex Monster 1200 Handheld Steam Cleaner

Polti vaporetta comfort steam cleaner...no steam

If you put two much water in it it wont steam ... Vacuums

I have a vaporsimac pv20 no problem steam cleaner which is heating up the water but no steam

... Vacuums

The Shark floor stem cleaner Will not produce any steam. What is the problem? I have ahd the machine a year and never had any problem. the problem just started.

Hi,Here is a tip that I wrote about the Euro-Pro Shark Steam Mop and why it maynot be getting steam to the head...Euro-Pro Shark Steam Mop Problem ... Euro-Pro Shark Steam Mop - Gray/ Purple Vacuum

Polti steam cleaner

Your polti is blocked up with limescale, you can try and decscale it but mine didn't work after that so I dismantled it, cleaned the valves out and now she's running at full steam ahead. ... Polti Vaporetto 2400 Canister Steam Vacuum

Replacement brushes for a Vaporetto Sprint 1200 Polti Steam Cleaner

... Polti VT1300 Vacuum

I own a Hoover Steam Vac V2 deep cleaner with Auto Rinse feature. The Model Number is not available ex: was on the bottom of the machine and the sticker is completely worn off the machine. I am having a problem with the bottle you fill with detergent ex: this bottle is seperate from the main clean water tank. THE PROBLEM: The little plastic part that goes in the bottom of the bottle has an "O" ring ex: cone shaped with a spring.....it keeps falling out. Can you supply a part number for this

Http://geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=641300\015\012Generic problem for all Vacuums\015\012I own a Hoover Steam\015\012Posted by w_brennan on ... Vacuums

I have a Uro-Pro vapor steam cleaner Model EP95 Have used it only a few times and worked well Today it worked for about 5 mins and then nothing from the wand but steam started coming out from under the canister. What can cause th is problem and is it fixable

... Euro-Pro Steam Cleaner EP95 Canister Vacuum

I have a Polti leco aspira 710. The water in the tank is heating but when the trigger is activated no steam comes through. The machine is showing one green light and is emitting a continuous beep. The vacuum cleaner is working fine - but no steam at all

... Polti Vacuums

I have a powersteamer and it does not spray water when I squeeze the trigger. The clean water tank is full, the cleaning solution is full and this is the same problem I had with my last Bissell steam cleaner, which I assumed was just that I had it for a few years, but this cleaner is only over a year old.

Every line has an O Ring at each end. inspect each one by removing the O Ring for nicks and cracks. Lubricate the with Vaseline and reinstall if ok so they will hold the prime to pump and vacuum up Your leaking O rings will draw air causing your p ... Bissell Vacuums

I am having problems with my Bissel ProHeat Steam Cleaner. It will not pick up the water from the carpet. Don't know what the problem can be.

... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum

I have a Vaporsimac PVT 2050 No Problem steam cleaner which is heating up the water but producing no steam. Could you advise me on local repairs, Glasgow

... Vacuums

I have a Polti Vaporetto household steam cleaner that I bought 16 years ago. I haven't used it for about 10 years because the connection between the steam er and the attachments doesn't work properly and it is difficult to use. The shop where I bought it no longer sells them and can't get them fixed anymore. I'm about to ditch it, but thought I would have another go at using it. (It was very expensive). Now I can't get the safety cap off so I can't fill it or test it. Any ideas on what I can do

... Polti Eco Pro 3000 Canister Steam Vacuum

When squeezing trigger and Depressing Clean surge Button on Upper handle of the Hooover Steam Cleaner F5914-900 there is no "snap" indicating trigger rod is in place. Everything else went in as instructed. The screws and bolts were no problem this concerns me because the main complaint I read about this model was leaking from the trigger and clean surge and the problem was not getting the rod in place. No matter how many tries or people (three) it still doesn't occur.

Http://www.geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=552215\015\012Generic problem for all Vacuums\015\012When squeezing trigger and Depressing\015\012P ... Vacuums

My euro pro s3300 shark steam cleaner heats up but doesn't steam when you press the button. It is gray in color and the light turns on and is hot to the feel. What is the problem can it be fixed by me or anybody.

If you use it for more than an hour theres an automatic kill switch located on the inside designed to make you buy another one , but you can take it apart and hardwire it to bypass that kill switch , and your steamer will work once again. ... Euro-Pro S3325 Handheld Steam Vacuum

Polti Repairs I have a Polti Vaporetto Eco 3000 steam cleaner, no power to unit. Fuse and power socket all ok. Was going then just stoped.

... Polti Eco Pro 3000 Canister Steam Vacuum

How do I undo the torx screws that hold the Polti 2400 Steam Cleaner (Polti Vaporetto 2400) together? There is an electrical fault and I will have to strip it down to investigate.The house RCD trips when the item is plugged in, I suspect over the years the cable has been twisted and is now shorting.

Hi you need the torque driver no 20 the problem I had was the 2 middle screws luckily a friend of mine had a set of torque allen keys they were long enough to remove them hope this helps if you llived in the North East I would have let you borrrow th ... Polti Vaporetto 2400 Canister Steam Vacuum

I have contacted Polti UK twice by phone and left a message and twice by email aover the last 4 or 5 weeks and have received NO RESPONSE> So much for Customer Service...!!! I have been given a Polti Steam Cleaner 2001R and would like some User Instructions. Please can you help? Thanks KK

I got the info I needed from: progressacasa.it website.\015\012\015\012Thanks ... Polti Vaporetto 2400 Canister Steam Vacuum

Have an old Hoover steam Vac and it will spray the cleaner down but will not **** up the cleaner. The red ball keeps coming up right away. What is the problem?

Check the filters, make sure they aren't clogged. Also if this has the foam filter on the inside of the tank lid, make sure it has at least a 1/4 is gap from the top. ... Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum

McCulloch Steam Cleaner Problem

Does your motor run if not there is a service switch to the motor inside the unit that has to be adjusted ... McCulloch MC1275 Steam Vacuum

Bissell Pro Heat 2x steam cleaner, problems!

Must likely the brush motor is bad. The top cover has to come off to check it, this is where the tank sits on. Part # 2036757 and is #35 in the pix.\015\012\015\012 ... Vacuums
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0798 seconds