Having problems with your Vacuums ?
How do I open the filling stopper on my steamer
\015 Model number ago 1227\015
Push down and turn antyclockwise
Repair Help & Product Troubleshooting for Vacuums
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
How do I open the filling stopper on my steamer
Push down and turn antyclockwise ... Vacuums
Water leak I just bought this steamer a few days ago, and already I am having problems, when I fill the water tank that your suppost to fill the water runs out before I even turn the machine on. I have tried using plugs to keep it from doing this just so I can shampoo my carpet, this seems to work to a point, considering the fact that there are two holes underneath close to the brushes and one just a little ways back from that location. Do you know if this is something that should have plugs or
If you just pruchased this, then it is under warranty, take it along with proof of purchase to a warranty repair shop and have them fix it. If water just runs out, then there may be a seal missing or a water line off. ... Eureka Atlantis 2595A Upright Wet/Dry Vacuum
How do you install the 210-1128 Bissell carpet cleaner steamer brushroll on the Bissell ProHeat 8910? The prong on the replacement roller is larger in diameter than the one it is replacing. How do you open it up enough to remove the plastic piece that is attached to the steamer - the one with the belt??
Hi,Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.Bissell Proheat Upright Wet/ ... Bissell 8910 ProHeat Clear View Upright Vacuum
I have a new bissell 50c9 upright vacuum and it keeps clogging in the clear window in the back. there is a flap that keeps coming open and filling up. everytime i clean and restart, the flap opens. i tried holding it closed and noticed lose of suction.
I can't open to fill tank.
Hehe, seem your spring pins is gone...\015\012when you press the handle, normally it release the thank\015\012and it is lift by a little plastic square attached to a spring...\015\012it is probably broken...\015\012push the ha ... iRobot 5800 Scooba Vacuum
How to open water tank to fill.
... Oreck Sanapathic DMS2000 Handheld Steam Vacuum
I need a fill cap and a wand for enviro steamer z370a please
... Electrolux Envirosteamer 370A Canister Vacuum
I have a Bissell power steamer 1631. I do not know how to fill the tank. Where do you add the shampoo? Also, the hose has an added small tube or hose like thing, where does this connect to?
A look here: http://www.bissell.com/Products/c/uprightdeepcleaner/p/1623PSPBS/ak/features/product.aspx ... Vacuums
I CAN'T OPEN THE LID TO FILL IT WITH WATER
Press down hard and turn antyclockwise ... Vacuums
Cannot remove cap that is used to fill monster steamer cleaner
Press the Water tank cap and Unscrew it to the empty water tank. (Page 7)Manual is at the link below.LINKH ... Euro-Flex Monster 1200 Handheld Steam Cleaner
Karcher help why cant i open my karcher steamer
... Karcher DE4002 Steam Vacuum
Steam buggy water reservoir cap has apparently been cross threaded, and cannot be removed by twisting or other "encouragement." If I cut it off, where can I get a replacement? Can the machine be used as is by taking the insert out of the cap and filling the reservoir through the opening? Is there a current manufacturer of this product?
You need to completely annihilate the plastic cap by cutting it off and destroying the remaining plastic to expose the stainless steel insert/plug. You can use either a pipe wrench or 11mm wrench to turn the insert counter-clockwise to unscrew. You w ... Tristar SB Steam Buggy Vacuum
Cant open vax steamer safety cap - Vacuums
Lead from water fill and detergent dispenser. Two small black stoppers don't fit tightly. Hoover Steam Dual Vac 12 amps Approx 5 yrs. old
You may have to replace the tank if the seals don't fit tight. ... Vacuums
I have a Bissell Pro Dry steamer and cant find my manual. I filled the bottom tank with water and solution and it is pouring out. I havent used the cleaner in quite some time so I can't remember how it all works. Where can i get a manual?
User’s Guides can be downloaded at www.bissell.com\015\012On the front page under Customer Service click on User’s Guides and enter the model number of your unit.\015\012User Guide will be displayed as a PDF file. ... Bissell Vacuums
I just notice when I went to change bag in my Kirby G4 that the whose inside was split open, which made all the dust fill up in the bag. How do I get a replacement part for this and what is that part called. Do I need to buy the whole outer bag?
You do not need a whole bag. The bag fill tube is replaceable. can be temp fixed with duct tape and new one installed at home. vacuum inside with another vac and you will be set to replace ... Kirby G4 Bagged Upright Vacuum
I have pressa Bella steam iron. I can't open the cap in order to fill the water.
Have euro-pro hydra-steamer model EP93-11. When filled with water will heat up and yellow light comes on, it will not emit steam.
Have you checked the steam regulator knob is in the correct position?\015\012\015\012Check this manual if you d ... Euro-Pro EP93 Steam Vacuum
Motor quit working. i was vacuuming and all seemed fine. then the motor went really low. when I opened it I noticed that the bag was not attached and the cannister had filled up with stuff and the filter was full. the vacuum will not run now.
My friend, the dirt you sucked up went right into the motor and it burned up. I am very sorry to tell you this. It is probably not worth repairing unless you are able to replace it yourself.\015\012\015\012In addition to not being able ... Kenmore 31912 Progressive Direct Drive Bagged Upright Vacuum
I can't open G55 steamer to add more water. How does top come off.
Would you like to provide me manufacturer? ... Conair Vacuums
I got my bissell for $7.50 from a thrift store, if you can believe THAT. Used it for the first time today after reading the manual online first. After filling the clean water bladder full of hot water and setting everything up the way I wanted, proceeded to turn things on and go for it. Well, the water/solution just kept coming and coming, without my finger on the trigger. Obviously something is jammed in the open position but where? The trigger moves freely.
This is the answer I got from Bissell:Please\015\012check the gasket at the bottom of the tank to ensure it is attached and\015\012not lodged in the reservoir of the machine. If this is not the problem,\015\012take the machine for i ... Bissell 8910 ProHeat Clear View Upright Vacuum
I have a Shark S3325R ultra steamer and have lost the manual. The first question is can I download the manual or can you atleast tell me how much water it takes to fill it
I own the same steam blaster. It can only hold 1400ml. DO NOT try to put a gallon of water in your steamer!!! ... Euro-Pro S3325 Handheld Steam Vacuum
I have an electrolux enviro multi steamer and have no instructions. I filled it up and turned it on and it is steaming out everywhere. The handle became too hot to use. What am I doing wrong ?
Check the handle. There is a Button which you press and hold and one which slides up and down. The slide button is so you don't have to depress the other button (when you are wanting constant steam, ie., for cleaning floors etc...).I wo ... Electrolux Vacuums
I can't find my instruction manuel. I cleaned the dirt out of it but the one part where it says max fill, how do you clean that? I can not open it.
... Taylor As Seen on TV Shark Navigator Vacuum
I fill the SE3306C steamer 50 ml, close the safety cap put it on and the light becomes green but no steam will come out ! Is it because I don't close the safety cap right ??