Having problems with your Vacuums ?

Woodies own brand paints problems

\015 Not staying on the wall\015

Answers :

Repair Help & Product Troubleshooting for Vacuums

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Woodies own brand paints problems

... Vacuums

I am buying a central vac system, can you tell me the better of the easy flo or nutone brand. I want the one with the least problems. It appears to me that the easy flo has fewer problems, thank you

Between the two brands... stay away from the nutone. If you can get it, the Beam, Eureka, or even the Electrolux and Kenmore(sears) would still be better. The warranty would be better on the Beam and Eureka (7 or 10 and one model is even 15 years) ... Easy Flo EF1525 Central System Vacuum

My Euro Pro model s3101 doesn't seem to have the steam content that it did when brand new. What could the problem be?

Hi,Change the water you are using... Here is a tip that I wrote about the Euro-Pro Shark Steam Mop and why it maynot be getting steam to the head... ... Euro-Pro Shark Steam Mop - Gray/ Purple Vacuum

My brand new Electrolux ultraactive vacuum has been replaced twice with the same problem. E 2/3 keeps flashing on the remote screen and doesn't work again after cutting out. I rang the company and they told me E2 or 3 flashing on the remote screen means a problem/fault that I could not fix and I have now returned the ultraactive for the second time!

... Electrolux Vacuums

Hello good afternoon, i have a Royal Sovereign water dispenser with a little fridge on the bottom part and the problem i am having is that the dispenser wont release cold water and the fridge wont cool either. i would like to know is there any thing i can buy to fix it or do i have to buy a brand new dispenser! Thank you for your time!!

... Vacuums

It's brand new - just out of the box! Noticed the dirty water tank is bone dry. There is no suction! The front removable nozzle seems to be loosely attached.. The metal clip doesn't seem to hold it tight. Not sure if that is the problem. But I have a very wet rug! Suggestion?

It sounds as if it wasn't assembled correctly. Was it already put together when you purchased it? It sounds like the Brush Bar Belt never got put on.Let me know if you need more help.Jim ... Bissell 1950-3 Quicksteamer Plus Vacuum

I purchased a brand new P113 Ryobi charger about 2 years ago. It has never worked. If I put a P104 battery in for a charge, it looks like it works correctly. I push the battery tester on the battery itself, and it says full charge, but when I go to use the bateery, it dies right away. I have tried three new P104 batteries. The batteries charge on my charger at work with no problem. The funny thing is, I don't need a battery in the charger and the charger does the same thing, It runs the test

If you have your receipt, check with Ryobi to see if it is still under warranty. It comes with either a 2 or 3 year warranty, depending on when it was purchased. If it is still covered, get it replaced/repaired. If it is not, buy the P117 charger. $3 ... Ryobi P113 18 Volt One Charger 140501001

My Roomba runs for a while and says error 2 to clean the brushes. This happens with cleaned brushes. And I have followed the instructoins. i have got a brand new set of brushes also. When inserting them the same problem continues. The floor is clean.

Remove the two round rings.....this has worked for me like a charm since! So glad to have the Roomba back up and running! ... iRobot Roomba 560 Robotic Vacuum

I just purchased and electric percolator. I plug it in to see if it worked. It percolated but never shut off. The electric cord and pot look brand new. On the bottom it is stamped US patent 1999329 108-115 volts 425 watts. Percolator No 201. It says there is a fuse inside. Could this be the problem? I haven't used and electric percolator and do no t know what to expect.

The fuse would not be the problem as it would cause the percolator to not work at all.The patent expired in 2007 and wasn't renewed so the company is likely out of business meaning no parts.Is there a removable panel somewhere?If there is,would you o ... Vacuums

After six months my mokabista expresso machine leaves a plastic taste/odor in the coffee, and the odor of old coffee remains on its plastic parts after cleaning them. If you don't have a solution to this problem, I will have to buy another brand because each cup is a new disappointment.

Go to walmart they have a cleaner called super clean its in the auto department if this cleaner dont take off nothing will comes in handy around the house keep off of painted surfaces will remove rite to medal make sure u rinse well ... Vacuums

Hover Elite Rewind I've only had this vacuum a few months and I really liked it until now. There is almost no suction from anywhere in the vacuum, and I've cleaned all the filters and rollers with my shop vac and made sure that everything was assembled correctly. It used to be really quiet now it is quite loud and it keeps over heating, and shutting off. At this point I have no idea what could cause this problem, the machine is nearly brand new and I can't afford a new one at this point.

You have to clean out the hose under the bottom of the vacuum cleaner. To do this you have to remove the bottom plate the covers the brush it has about 6 screws. Also remove the brush and belt in order to thourhly clean it. I had the same issue you h ... Vacuums

I have a probleme with my coffee maker model 81178 kenmore. He dosn't make his full cycle and the coffee is weak.I even put more coffee but it didn't change.It does that with all the coffee brand I tryed.The coffee is hot anough but weak. thank you Richard

Looks like you have a problem on the center tube. Check:\0121. It has the spring to press tube to the bottom of the device.\0122. It is clean with no obstructions.\0123. Water comes up frequently and each time more darker to the little cu ... Vacuums

Hoover windtunnel t series belt is loose- roller brush doesnt turn. Its brand new belt is slipping. we bough new belts and putthem on same problem. Can not find solutio in manual. Is the belt supposed to go around the "metal pulley". I know it goes around the little metal motor thing, then thru the guide and around the brush. What is the metal pulley??? Is is the larger round silver thing between the guide and roller?

I also have a loose belt and have bought additional belts but have the same problem. I put the it around the metal rotor and around the brush roller a shown by he Hoover video, and it is loose. ... Hoover S3765-040 WindTunnel Bagless Canister Vacuum

I just bought a hoover floor mate for hard floors. The problem is the water with cleaner is not coming down to the brissles at all. Help please. It is brand new. any ideas???

Http://geeksquad.fixya.com/ThreadView.aspx?prdid=40471&thid=603805\015\012I just bought a Hoover\015\012Posted by serdmann4 on May 17, 2008\015\012I just bought a ... Hoover Floormate H3000 Upright Wet/Dry Vacuum

Loose paint is stuck in my Hoover 5753-900. Now it won't turn on

Take the bottom plate off where you would install a new belt. the impeller is clogged up. use a wire to poke out the clogs. you can use a shop vac to **** out the debris. check your belt for wear spots while your at it. you may need a new one . befo ... Hoover U5753-900 WindTunnel Bagless Upright Vacuum

Brand new bissell #6583 upright vacuum worked for 15 min

The belt may be broken. The following link is to the User's Guide which explains how to check and replace the belt if needed.\012 ... Bissell 6594 PowerForce Bagless Upright Vacuum

The problem is that the cleaner is heavy to use and does not pull itself forward as it should. It has been back to the supplier 3 times but they have not fixed the problem. The LED's on the front flicker and I think it may be a problem with the sensor. If you have any info. on how the sensor works and where it is located it would be useful as well as any other suggestions to fix the problem please.

If it heavy then do some muscle work and body building ... Vacuums

My Riccar 1700 will intermittently lose power while vacuuming. I have had the vacuum for 4 years and this is the second time that I have had this problem. The first time the authorized repairperson said the problem was a dirty hepa filter. The second time, the repairperson put on a "pig-tail"(?) and said that he did not have a shut-down problem when he tested the vacuum in the store. I just picked it up from the store today, brought it home and the same problem occurred within minutes.

... Riccar RC1100 Compact Vacuum


I found this information related to a different model of the Vacmaster:\012If you see F1 displayed on the LED screen and the machine will not function, make sure the lid is open and turn the power off. Turn the machine back on and it should retur ... Vacmaster Vacuum Pack Machines: VP540C Floor Model Vacuum Packaging Machine

New hoover TC5235 bad suction what is the problem

... Vacuums

Vacuum seems to have a problem

Take off the bottom plate and check the inlet to see if it is clogged and make sure the belt is ok. If no clog there, then it is in the hose. If you can't figure it out and is less then 1 year old, then it is under warranty, take it in for repair a ... Vacuums

Brand new Hoover U5140, will not pick up anything

Yes you do need to attach the hose. That way what the brush roll picks up will go thru the hose and then into the bag. ... Hoover U6616-900 WindTunnel Bagless Upright Vacuum

Same Shut Off Problem as Hamster71

Hey just thought you might like to know that I have been given an answear on the same problem log in to get the info. Now I just need to know how to open it without breaking it! ... Electrolux Lux 7000 Bagged Canister Vacuum

Same Shut Off Problem as Hamster71

The part that you call the particle size sensetivity adjuster is bad. There are 2 seals in the assembly, the lower seal is slipping out of place because the plastic lip which keeps it in place is broken. Split housings and replace part. This machi ... Vacuums

Roller Bar is abrading (removing the fabric of) our carpet. Is there a softer brush or another solution? Has anyone else observed this problem?

Hi Mark,If you're concerned about the suitability of your DC25 for this particular carpet, I'd encourage you to email us at [email protected], as we'd appreciate the opportunity to provide further assistance.We'll look forward to h ... Dyson DC25 Animal Bagless Upright Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0286 seconds