Having problems with your Vacuums ?

Electrolux ambassador how do I get the cord to rewind?

Answers :

Repair Help & Product Troubleshooting for Vacuums

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Electrolux ambassador how do I get the cord to rewind?

... Vacuums

My electrolux ambassador power wand quit working. I replaced the switch that shuts it off when the roller stops, but it wasn't the problem. The on/off switch is fine, the motor is fine. We have traced the problem to the wires inside the canister by opening the inside cover to the bag container. We see the power cords going into the canister but we're not able to get to anything. We can't find any screws to undo that would open it up in order to follow the wires deep into the canister. We've bypa

... Electrolux Vacuums

Cord rewinder on a Electrolux model C102J vacum cleaner

Hi there Johnd, SmartAlec from Nelsonvacuums.com.au here. I fix vacuums full time for a living and the first time i had this problem with the australian version of this vac ... Electrolux EL7055A Bagless Canister Vacuum

Cord rewind The power cord is jammed and won't go in or out. I can't find a way to get the cover off to have a look at it. Any suggestions please? Power cord jammed won't go in or out. Can comeone tell me how to undo the casing to get to the power cord?

Which model do you have.. ... Vacuums

The cord rewind button for my electrolux vacuum cleaner is stuck so it always rewind the cord. how to fix it?

... Electrolux Vacuums

The cord on my electrolux Epic 6500 has been pulled too far out and will not rewind. How can I access the cord reel to rewind?

There are two keys holding the body together, underneath the bumpers on the side of the vac. With the bag door open these keys when gripped with pliers will slide forward to release the body panels. Before opening the vac, gently push the ... Electrolux Epic 6500 Vacuum

We bought a new cord winder for our Electrolux 1205 Canister Vacuum cleaner and we are trying to install it is not turning on. We get it all connected but it doesn't turn on. Is there a reset button or some advise you can give me to get it working? I used a voltage detector to see if there was power running through the cord winder and there is.

Did you put a bag in the vacuum?\015\012I suspect there's an improper wire connection somewhere, but there are other things that could cause this I strongly recommend taking it to an authorized Aerus Electrolux dealer and letting a trained tec ... Electrolux Vacuums

Have an older model Electrolux canister model. The electric plug is broken so I got a new plug to put on. When I cut the cord to replace the plug, the dang cord retracted into the unit. So how do I get access to the cord area so i can find the end to the cord!

Hi,\012\012You have to open the vacuum cleaner and look for the wire.\012\012It is located inside the circular wheel, where it wind itself up.\012\012Don't be afraid to open it, unless your willing to pay somebody just to install a ... Electrolux Vacuums

Hi , I have replaced the electric cord on Electrolux Lux Royal vacuum , but the rewind that retracts the cord does not pull it in . The coil spring looks ok but it will not pull the cord back in , any suggestions please . Thanks Dave Ryder

Http://www.geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=564353\015\012Generic problem for all Vacuums\015\012Hi, I have replaced\015\012Posted by dryder on May 02, 2008 ... Vacuums

Electrolux Epic 6500 SR cord will not rewind - Electrolux Epic 6500 Vacuum

Unfortunately most cord reels cannot be repaired and must be replaced as a unit. That Vac Guy ... Electrolux Epic 6500 Vacuum

S444i just would not switch on. When I took it apart I sprung the rewind coil on the cord retracter and I can't get it back together. Now I have 2 problems!! It won't start and the rewinder

... Miele Vacuums

Cord rewind The power cord is jammed and won't go in or out. I can't find a way to get the cover off to have a look at it. Any suggestions please?

A bit late for the original questioner, but perhaps this will help someone else.\015\012\015\012There are many models of the Hoover Telios. This solution applies to the T5603 at least, but perhaps not to all models... sorry, I don't know about ... Hoover S3330 / S3332 Straight Suction Telios Bagged Canister Vacuum

How to remove the " button cord rewind " from the kenmore progressive model 116-28712790 ?? I need to get to the screw below to open up to get to the motor.

I found the problem... screws on top under the cord rewind bar ... Vacuums

Cord retracted into canister-how to take electrolux apart to get it out

You will have to take the cover off...it should be held together my a few screws. Just lay out everything in the orde that you take it off so it is easier to reassemble. ... Vacuums

Electrolux Ambassador canister's cord does not recoil

... Electrolux Vacuums

How can I open Miele Flamenco in order to get the wire cord rewinder, which is stock

... Miele S4210 Antares Bagged Canister Vacuum

How do I repair the cord rewinder on an electrolux model #1677?

... Vacuums

Electrolux 7055 Need manual to repair rewind cord

Http://evacuumstore.com/s-107-el7055a.aspx ... Electrolux EL7055A Bagless Canister Vacuum

Electrolux model el7055 can't get the cord to retract, any ideas?

... Electrolux EL7020A Oxygen 3 Ultra Canister Vacuum Cleaner Bagged Vacuum


Hi,\015\012\015\012I will try to find a service manual for you. ... Vacuums

How do i open the housing of an electrolux ambassador model #c101j to fix cord recoil

This can be a complex undertaking, so I highly recommend taking it to the nearest Aerus Electrolux store for repair. I've seen many disassembled machines come in to the shop because the owner couldn't figure out how to put it back together. Any mis ... Electrolux Lux 5500 Canister Vacuum

I have a silverrodo and can't get the cord to fully rewind is there a way to fix this? thanks

It's probably a worn out spring. You'll probably need to take it in to the local Aerus Electrolux shop for replacement of the spring, and possibly the entire cordwinder. You can also call them and see if they're close enough for free pick up and de ... Electrolux Vacuums

Need to open the canister to get to the cord assembly of my Electrolux Lux 5000

Why do you need to get to the cord assembly?\015\012If the cord will not retract, tilt the vacuum to about a 45 degree angle and gently tug and release cord. It will usually retract.\015\012Due to problems ensuing from untrained persons ... Electrolux Lux 5500 Canister Vacuum

Our Electrolux Lux 5000 vacuum's cord will not rewind. Can anyone tell us how to open the vacuum to access the cordwinder?

... Electrolux Vacuums

Following old directions found online I opened an Electrolux Ambassador III to fix the cord winder. When reassembling, I found a loose white wire. Where should it be reconnected?

A white wire is part of the power wiring (neutral), but if the machine runs ok, it may be a left-over from previous work or original manufacturing. If the machine does not run now, then look obvious bare connectors to reinstall it. Hope this helps! ... Electrolux Vacuums
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0613 seconds