Having problems with your Vacuums ?

Eureka airspeed one

\015 How do you change the belt? \015

Answers :

DustcupScreen

Latch

Pull dust cup latch to release
dust cup. Remove filter and wash. Allow to air dry thoroughly (24 hours) before placing back in dust cup

Empty the dust cup into the trash container. Wipe debris off screen.

Hold dust cup handle in one hand and the bottom of dust cup in the other, turn dust cup counter clockwise to unlock the cup from the lid.

Hold dust cup handle in one hand and the bottom of dust cup in the other, line up arrow on dust cup with unlock icon on backside of dust cup. Turn clockwise to lock the cup to the lid.


Replacing the Belt

Unplug vacuum.

Recline cleaner back. Using Philips screwdriver, remove 4 screws from hood.

Using thumbs, push down on height adjust knob, while pulling up on
inside hood edges with fingers. Lift and remove hood.

Lift left side of brushroll out of

grooves. Then lift right side of

brushroll out of grooves.

Line up corners of hood and put hood tab inside the front of cleaner. From front to back, push hood onto base, keeping hood in base grooves, and line up 4 screw hol

Remove belt from the brushroll and motor shaft. Loop new belt over motor shaft and brushroll, onto grey belt pulley.
Repair Help & Product Troubleshooting for Vacuums

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Eureka airspeed one


DustcupScreenLatchPull dust cup latch to release dust cup. Remove filter and wash. Allow to air dry thoroughly (24 hours) before placing back in dust cupEmpty the dust cup into the trash container. Wipe debris off screen. ... Vacuums

I have a Eureka 4870GZ. It turns on, but the brush roller doesn't move. The belt looks fine. I do have an extra belt and would try replacing the old belt, but I can't get the old one off the motor shaft or the new one on. I called Eureka customer service. The lady said there's supposed to be a small space between the motor shaft and the outside edge of the vacuum where I can slip the old belt off and the new one on. I don't see it. It looks like the motor shaft goes into a recessed place in the


Remove the top cover so that you can access to belt, You'll find 2 rows of 4 decorative holes on the top cover, In two of the holes you'll find the screws, Please use a flash light to see in that., Once the screws are removed, you'll be able to ... Eureka Vacuums

Eureka airspeed I just bought my Eureka airspeed, and within 2 minutes of the first use, I noticed a burning smell, and when I turned it off there was smoke coming out of the base. Is this something I should fix, or should I return it?


... Vacuums

Whirlwind 4481b i have the eureka whirlwind bagless model 4481b which looks the same as the 4496.i'm looking for the cover right above the dirt cup.it says eureka on it its just a cosmetic item serves no purpose but i need one can you find it or do you have it?


... Eureka Whirlwind 4496 Bagless Upright Cyclonic Vacuum

Need to see a picture of a eureka ez kleen upright bagless just recieved one free and I don't know what kind of filter as here isn't one in it would appreciate any help


Here is a set ..\015\012\015\012 ... Eureka 2971AV EZ Kleen Bagless Upright Vacuum

I have a eureka surface max 300, i saw smoke come out of my vacuum i seen that the belt was broke every time i change belt i run it on it snaps every time ive put 3 new ones and each one break right when i start it it looks like the metal piece is burning it is there a piece missing?? what am i doing wrong?? ugh i just purchased it couple of months agoo not even older then 6 months .. what do i do?


... Eureka Capture Upright Vacuum Vacuum

Owners manual for eureka airspeed 12 amp - Eureka 12 Amp Capture Vacuum Upright Vacuum


... Eureka 12 Amp Capture Vacuum Upright Vacuum

Can I use a Radio Shack thermostat for my Eureka canister steamer? Which one? Would the NTE DTO 220 work?


... Eureka Enviro Steamer 370 Upright Vacuum

Don't know how to replace broken belt on eureka pet pal upright bag less put one on broke immediately


... Eureka 3276AZ Pet Lover Bagless Upright Vacuum

I own a Eureka Optima 437 and one of the rear wheels are broken and cannot find parts for this. Where can I find parts for real wheel? I have a rear wheel that came off too. The wheel seems fine, but the plastic base that the wheel clicks onto on the underside of the vac seems to have cracked. I need a new plastic bottom. Any ideas?


Called Eureka Customer Service and ordered another part. They are mailing it to me free of charge!No more problem. ... Eureka 431A Optima Bagless Upright Vacuum

I have a broken fan blower blade. where can i get one for a C2094G Eureka


... Eureka C2094G Vacuum

I have a Eureka Central Vac CV1601b. The motor does not stop unless the Unit is unplug from the electrical outlet. Any Idea?.I removed the control unit to check if there was disconnected wires or burnt wires. Everything look normal. The circuit board does not show area that overheated. There seem to be 2 relays. Likely one of the two went bad. What do you think.


If the unit is relay controlled, there is always the possibility that when the unit was turned on, the relay contacts welded themselves shut making the power button ineffective. \015\012\015\012If you're familiar with relay pinouts, with ... Vacuums

I boouhgt not long ago a Eureka, the Boss samartVac. 4870K wide track I have misplaced the little instruction booclet It be possible to sent me by te wegg or at home one? my e-mail: [email protected], I was even able to sent the guarante card. My address: Mrs. Beatriz Truxton !416 Scenic Drive Alamogordo, NM 88310 I got mine in Walmart in town. Thanks for your help.B.T.


... Eureka Vacuums

I need to get a belt for my Eureka up right Model # 2271 what is the number of the belt and how can I get one?


Http://www.vacuumcleanershop.com/Eureka-Belts.htm?gclid=COSGj7qs05ICFQG5PAodmiJtlA ... Vacuums

What is the difference between the 2 eureka enviro steamers: the 310 model, and the 313A? are they doing the same job, and which one is a better buy i.e., does the job, and does not cost an arm and a leg more?


Greetings,\015\012\015\012The Eureka 310 Envirosteamer is no longer made. Eureka discontinued this particular model several years ago. It was a very highly rated steam mop at the time, so Eureka came out with a new model that had a very ... Eureka Enviro Steamer 310 Stick Vacuum

Eureka airspeed 12 amp vacuum no power


... Vacuums

Belt?! hello, I need to change the Eureka Oxygen Canister Air Driven Upholstery Tool's Belt (model 5860Avh), but I don't know which one to get? any help please? Best, Pierre.


You will probably have to order it online. ... Vacuums

I have a Eureka The Boss Smartvac. I was vacuuming and it just went off. It was on one second and then off the next. I changed the bag thinking it was full but it didn't go back on. What's happening?


If you also notice on the bottom left corner of the vacuum standing behind it you will see a small warning telling you about this and to let the system cool for 30 minutes prior to turning it back on. Make sure you clear everything during this time. ... Eureka Smartvac 4870 Bagged Upright Vacuum

WE NEED A HOSE RACK FOR A EUREKA CENRTAL VAC 36FT.HOSE IS ONE AVAILABLE OR WILL ANY GENERIC HOSE HOLDER BE SUFFICIENT. [email protected]


Any shop or store that sells central systems will have hose hangers, any one should work. ... Vacuums

I own a Eureka Optima 437 and one of the rear wheels are broken and cannot find parts for this. Where can I find parts for real wheel?


Sorry, your best bet is to call Eureka or Electrolux. If they can't provide you a part start looking on cragslist or Ebay. ... Eureka 431A Optima Bagless Upright Vacuum

Suction Cover The suction cover of my Eureka Deep Steam 2575A is broken - the tabs snapped off of the cover so I am unable to screw the suction cover back on. I need to purchase a new suction cover but can't find one anywhere. Anyone know what I can do? thanks


The exact same thing happened to me. i just called and ordered it from eureka. the number is 1-800-282-2886. the cover cost 13.07 and the s ... Eureka 2576A Steam Vacuum

MY VACUUM ISN'T PULLING AS STRONG AS IT USED TO SO I THINK IT NEEDS A NEW BELT. I CAN'T FIND THE MANUEL ON IT SO I NEED SOME INSTRUCTIONS ON HOW TO CHANGE THE BELT. I DON'T WANT TO BREAK MY VAC. CAN SOME ONE PLEASE INSTRUCT ME ON HOW I SHOULD CHANGE THE BELT PLEASE. TYPE VAC: EUREKA THE BOSS WHIRLWIND LITE CYCLONIC POWER CANISTER TYPE VAC. THE HANDLE IS DETACHABLE TO CLEAN IN THE CORNER WITH A SMALL EXTENSION.


You can get Eureka replacement belts here:Eureka Vacuum Betls ... Vacuums

I purchased a Eureka Vacuum The Boss SmartVac one year ago, I misplaced my manual. The problem is when I try to vacuum dust blows every where as dust storm. How do I resolve this problem?


It sounds like your filters are dirty and if it is a bag system the bag is full or not seated properly ... Vacuums

Can't find the manual to the Eureka Enviro Steamer Deluxe. Where can I get one?


Try this http://www.eureka.com/service/manuals/70359.pdf ... Eureka Deluxe Enviro Steamer Vacuum

What causes these things to become unbearably loud? We've cleaned evey filter on the machine, pulled every speck of hair and lint off the brushes, changed the belt, no clogs anywhere. I've totally (and I mean totally, down to the brushes on the motor!) torn this thing down and put it back together with no difference. Also have a Eureka bagless, and after minimal use, and almost anal retentive maintance, it does the same thing,to stinkin loud. Wish one would **** up the other to save a trip to th


A clog in the hose or dirt inlet by the brush roll will cause the motor to sound loud. But so will a bad motor bearing, or motor fan, in which case you would have to replace the motor. ... Bissell Vacuums
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0329 seconds