Having problems with your Vacuums ?

The DC25 won't go in the up right position. It is

Answers :

Here is the problem the peg as come out of the groove it runs in this video will show you how to fix it
Repair Help & Product Troubleshooting for Vacuums

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a Dyson DC25. The wheels won't return to the "storage" or "up-right" position. The red and gray "levers" that you step on to put in the up-right position seem to be locked. Any suggestions? Thank you, Cari

... Dyson Vacuums

My Dyson DC25 got stuck and wouldn't return to the upright position, I figured out that one side had jumped the track and gotten stuck in the square hole below the track. I did not want to break the plastic to force it back, so I removed the screw on the right side that was holding the kick stand on and removed the kick stand, also a spring thing came out. Problem is, now I have no idea how to re-install the kickstand. Can't find a technical manual or video anywhere, it can't be very difficul

... Dyson DC25 All Floors Bagless Upright Vacuum

Hi, pressing the big red foot button on the dc25 lowers the cleaner to the working position,but it wont stand up again. would appreciate some help. thanks. TC

Sounds like the ball cradle is worn out, the springs are too stretched to pull the handle release pedal back into place. you can do one of two things, replace the cradle assy, or just lift the red pedal up when you raise the handle ... Dyson DC25 All Floors Bagless Upright Vacuum

The DC25 won't go in the up right position. It is

... Vacuums

Kenmore 116.35922500 brush wont turn. Seems to come on if handle angle is held at just the right position but it is intermittent. Reset button is not popped up and doesn't seem to have any effect.

... Kenmore Vacuums

Handle wont go to upright position

The red pedal has slipped out of position. On both ends of the red pedal you'll see metal rods (the axel of the pedal). On one side you'll see the metal rod sits into a long groove, on the other side you'll see the metal rod sits into a round hole. T ... Dyson DC25 All Floors Bagless Upright Vacuum

Dyson dc25 wont lean back properly

... Dyson DC25 Vacuum

Hoover u5781-900, motor shuts off (intermittent)when you shake vac or make jerky movements.If you move vac to up right position the vac starts right up.When you giggle vac, motor starts and stops no mater if you just started up or vac for ran for 45 min. Thanks Lucy C.

Lucy\015\012you have a bad connection somewhere in the unit\015\012this is a fire hazard and you should not use this until its been fixed\015\012could be a pinched wire or broken connections ... Vacuums

Dyson dc25 power switch wont stay on - Dyson DC25 All Floors Bagless Upright Vacuum

Hi Chett,I'm sorry to hear you're having difficulty with your DC25. If the switch doesn't seem to be working correctly, I'd encourage you to get in touch with us directly as we'd appreciate the opportunity to provide further assistance. ... Dyson DC25 All Floors Bagless Upright Vacuum

My DC-25 will not return to the upright position. I emailed Dyson support and the response was: "The DC25 stabilizer wheels will not lock into position if the “spokes” on the red pedal are not seated correctly." I agree with that assessment, but cannot figure out how to get the spokes on the red pedal to seat correctly. The manual is useless for this problem since that part of the vacuum cleaner came already assembled, so the manual does not address it. Help.

It sounds like the undercarriage unit has failed. It is a common problem on ball models. The DC25 is a recent model so would still be under Dyson's 5 year guarantee. Get them out to it. ... Dyson DC15 All Floors - The Ball Bagless Upright Cyclonic Vacuum

Dc25 dyson ball clicking and wont roll well - Dyson DC25 Vacuum

... Dyson DC25 Vacuum

Dyson DC25 won't return to upright position - Dyson DC25 All Floors Bagless Upright Vacuum

... Dyson DC25 All Floors Bagless Upright Vacuum

I have an Easy-Flo central vac unit. The handle on the electric hose has a switch on the handle. With the switch on ''O'' in the center, it's off. On the left, is the ''I'' position. The vacuum runs but the power brush doesn't. On the right is the ''II'' position. The switch won't flip that way. It feels stuck. It feels as if there is something underneath of it that won't let it push that direction. I have the switch out of the handle, but I can't seem to get the actual black casing around the

Switches are not usually designed to be dissembled.I would strongly suggest that you dont take the switch apart. you are better off getting a new one. then if you feel like it you can take the old switch apart and if it dosnt work you still hav ... Vacuums

Rival model CM1100 coffee maker: I can not get the coffee carafe in the right position. Should it lock in? Sometimes the coffee does not enter the pot and overflows onto the counter. Should the handle be on the left or the right or maybe the center? Please help me. I am not a coffee drinker and when I try to serve it to friends, I end up with an embarassing mess.

... Vacuums

Water wont spray when its in the floor cleaning position

Hi Patti, here's a quick link to troubleshooting steps to assist you with the spray.http://www.bissell.com/FAQDetail.aspx?id=1123&cid=ccsocial ... Bissell Brushroll Proheat 2X 8920 9200 9400

In the undercarriage where the green cage that is to open when the yellow tabs are pressed will not open. the right side will unlatch but the left one wont unlatch.

... iRobot Roomba 530 Robotic Vacuum

The ball on my dc25 wont go forward

Hi there,I'm sorry to hear you're having difficulties with your DC25 Animal. If the Ball seems harder than usual to rotate, this may be because the filter inside the Ball is out of position. Try removing and refitting the filter, making sure ... Dyson DC25 Animal Bagless Upright Vacuum

The handle on the dyson dc25 is stuck in the down position wheels will not lower

... Dyson DC25 All Floors Bagless Upright Vacuum

After hoovering yesterday my dyson ball wont stand up right.

Solved this today by folding the upright part back as far as it would go, and wiggling it a little. It clicked back into place.\015\012 ... Dyson DC15 All Floors - The Ball Bagless Upright Cyclonic Vacuum

Dyson Rollerball wont clikc into unpright position.

I've just had the same problem! The small metal poles either side of the red push bar at the bottom of the hoover should both be in a groove/runner. The problem is that one or both of the metal poles has popped out of the runner and is stuck in one o ... Dyson Ball DC24 Bagless Upright Vacuum

When in the up right position the dyson looses suction then begins to take in air just above th filter at the vented area

It sounds like you need to follow the hose and make sure it's connected to the vacuum properly, and make sure all the fitting connecting the hose to the vacuum are sealed good. It's best to wipe the rubber gaskets between fittings with a damp cloth ... Dyson Vacuums

My dyson DC25 won't go back into the upright position. It appears that a silver notch underneath has somehow come out of the sliding groove it should be in and lodged elsewhere. I've only had it 4 weeks!

Hi its Darran at Dyson.We can help re-locate the stabiliser. Please call our Helpline on 0800 298 0298 (UK) or 1866MYDYSON (US). Kind regardsDarranDyson Customer Service ... Dyson DC25 All Floors Bagless Upright Vacuum

The extendable wand wont work? - Dyson DC25 All Floors Bagless Upright Vacuum

Throw you dyson away and write nasty messages here because dyson has the worst website for information. for what we pay you should get on-star ... Dyson DC25 All Floors Bagless Upright Vacuum

My dyson dc25 hoover won't go in to the upright position

... Dyson DC25 All Floors Bagless Upright Vacuum

The beater brush wont spin because the brush roll is always in the off position. Moving the carpet/hard switch doesn't turn it on.

Hello : \015\012\015\012Try this please : \015\012\015\012 Switch the carpet/bare floor dial back & forth 5 times, ending on carpet. Tilt the handle back as if to vacuum upright & lay the vacuum on its side so it is resting ... Hoover U6630-900 WindTunnel Bagless Upright Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0527 seconds