Having problems with your Vacuums ?

Bissell Model 7901 not spraying at all

\015 I have a Bissell Model 7901, which I have had for several years now. I have used it quite a bit. When I used it last time, it kinda sprayed from the handheld tool, but did not spray near the spinning brushes on the bottom at all. I am very handy, and opened up the unit (it was unplugged, of course). I discovered that the pump, though still functioning, was difficult to turn, and it was going to break at any given moment. I ordered a new pump from Hesco. I also discovered that the heater unit was nearly clogged up. I carefully removed it (labeled the hoses, etc), removed the cover, and cleaned it out. I checked each and every hose to make sure that it was not clogged. The belts are good, and the new pump that I installed turns fine. I am 100% certain that the hoses were reconnected properly, and I have not found any leaks whatsoever. Upon reassembly, I am careful not not crimp any of the hoses.I filled both tanks with water, and made sure that the seals are okay. The water does not come out when I turn the thing on...no matter what I do with the switches or knobs...The red cross spinny thing moves a little bit, but just barely. It seems that a bit of air is blowing on the cross, but it barely moves.I am very frustrated with this. I have taken this thing apart, and put it back together it seems like a hundred times. I can fix all kinds of stuff, but with this thing I seem to have met my match.I have reviewed your previous answers to other people, and kept your suggestions in mind when I am working on this thing.What could be the problem? In other words, what am I doing wrong?\015

Answers :

Repair Help & Product Troubleshooting for Vacuums

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My Bissell Proheat 2X model 8930 will not spray out


... Bissell Vacuums

Bissell Model 7901 not spraying at all


... Vacuums

I have a bissell powersteamer model #1697-W it will spray out soap but it will not spray water can you please help me thank you


... Bissell 1697W Powersteamer Pro Upright Vacuum

Bissell proheat 2x model 8920 water is not spraying out just getting a little trickle. Model is less than a year old


... Vacuums

My bissell proheat model 25A3 won't spray water to shampoo carpet the tool sprays water


... Bissell Vacuums

I have Bissell Model 1699-R Proheat carpet steam cleaner one of the tubings that connects into spray got mixed with some tubings during tubing replacment to the point that tubing that is conected into flow indicator cap does not turn at all to show if the chemical is sprying or not.i am looking mainly for tubing water/chemical diagram in order to verify the right connection.please help if you can bissell user. thanks


... Vacuums

Bissel model 8930-v would not spray - Bissell 8930M Upright Steam Cleaner


... Bissell 8930M Upright Steam Cleaner

Bissell powersteamer model #1685 will not do anything but make noise. will not spray. bissell.com says model number does not exsist....grrrrr!


That usually is an indication that the pump belt is worn or broken. You can get the belt and view the manual here:Bissell PowerSteame ... Bissell 1697-7 Powersteamer Pro Deluxe Vacuum

My Bissell Proheat2 Model 9200 does not spray cleaner. I took all the hoses(tubes) off and cleaned them. They had the dried cleaner in them. Still does not spray. Could it be the pump?


Hi,Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.Bissell Proheat Upright Wet/ ... Bissell 9200 Upright Vacuum

My bissell spot lifter model 1716 won't spray water at all, how do i fix this?


Ok - this works even though it probably isn't the "best" solution. Unclog the input and output nozzle ares with a pin. The input area (behind the solution) was my clog problem - I put 2 or 3 drops of CLR into the hole, waited 5 minutes, then primed t ... Bissell 1716 SpotLifter PowerBrush

My steamcleaner bissell 2xx proheat model 9200 will not spray at all


... Bissell 2X Proheat 9200 rug cleaner

Bissell model 7901p does not spray water on carpet


... Bissell 7901-7 Proheat Upright Vacuum

My Bissell Quicksteamer Model 1960-R won't spray cleaning solution. I have cleaned it and taken apart the whole thing. I can't find any problems. The holes are not cloged where the water comes out as I disconnected it and blew through it to be sure. The lines show water trying to go through. It is as if it doesn't have enough power to pump the water out when I squeeze the trigger. I am thinking it is the pump thing but can't find a replacement part for it.


... Bissell 1960-3 QuickSteamer Plus Upright Vacuum

I have a bissell powersteamer pro delux model 8804, It will turn on, and spray, but will not **** the water back up.


... Bissell 1697-7 Powersteamer Pro Deluxe Vacuum

My Bissell ProHeat 2X Model 8920 will not spray the cleaning solution. It has suction but nothing else. What could I try to fix it?


Hi,Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.Bissell Proheat Upright Wet/ ... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum

I have a Bissell Proheat Turbo 2x model 9300. It has stopped spraying at the floor. The hand tools will work so I assume this means the problem is at the base somewhere. I cleaned the nozzles but don't know what to try next. It has always had a problem with dumping too much cleaning solution as well, don't know if this is a contributing factor


Hi,Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.Bissell Proheat Upright Wet/ ... Bissell ProHeat Turbo Deep Cleaner Upright Steam Vacuum

My bissell powersteamer model # 1697 will not spray water. What could be wrong?


... Bissell 1697W Powersteamer Pro Upright Vacuum

Using Bissell Proheat Model 7950 No spray when using "floor cleaning" and "flow indicator" doesn't spin


... Bissell Vacuums

Ok. i have a bissell proheat 2x model # 8920 06356c i'm trying to clean a large rug in my home .. i have the fluid in the tank and can't figure out why it's not cleaning as it should.. the motor's running but not spraying and cleaning as i expected to do..


Hi,Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.Bissell Proheat Upright Wet/ ... Bissell 8910 ProHeat Clear View Upright Vacuum

I have a bissell powersteamer model 1697 that does spray water any more. Will a new water pump solve my problem?


Check all lines from being gloggged /also check screen in the water tank on hose can you here the pump working ... Bissell Vacuums

Bissell Proheat Plus Model 7901-P won't spray out cleaning solution, but does **** up liquids. What would cause this? Also, Lost Manual where can I get another?


Hi,Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.Bissell Proheat Upright Wet/ ... Bissell 7901-1 ProHeat Scotchgard Upright Wet/Dry Vacuum

Bissell model 8920 deep cleaner. I get cleaning fluid spray on the upper furniture wand but not at floor wand.


The heater is clogged its in the handle ... Vacuums

I have a bissell pro heat carpet shampooer model # 8910 and it will not spray any solution out what could the problem be its only been used twice without any problems


Hi,Here is a tip that will give you all the information you need to fix your Bissell Proheat Vacuum Problem.B ... Bissell 8910 ProHeat Clear View Upright Vacuum

I have a Bissell Model 7920 that does not spray through the floor or the attachment. I have disassembled the unit and the only area that water does not pass through is the top of the pump through the pump. How can I unclog or trouble shot a bad pump?


Hi,Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.Bissell Proheat Upright Wet/ ... Bissell 7920 ProHeat Pro-Tech Upright Wet/Dry Vacuum

My Bissell Model 9200 quit sucking up sprayed solution.


There are a couple areas to check:\015\0121. The black gasket where clearview water collecting unit and the base's front meet. Ensure gasket is in good condition.\015\0122. Check if you're getting sufficient suction: remove the water co ... Bissell 9200 Upright Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0542 seconds