Having problems with your Vacuums ?

HOW TO REPLACE BELT ON kIRBY cLASSIC 111 vACUM cLEANER?

\015 CANNOT FIGURE HOW TO TURN THE FRONT OF VACUM TO GET THE BELT OVER THE PULLEY Would like to see a diagram from the owners manuel if possible. Has been a long time since I had to replace the belt. Mine is the old red model with plaid bag.\015

Answers :

My husband got home and rescued me! He immediately fixed the problem.
I don't have a diagram, but I might be able to explain it to you.
\015\012Take the nozzle off the machine. Remove the brushroller and old belt.
\015\012
\015\012Set the belt pulley to the on postion. Put the belt on the roller and put the roller back into the roller housing with the belt centered. Turn the belt pulley to the off postion. If you look in the hole in the back what you want to happen is the pulley to spin and hook the belt stretching it out.
\015\012
\015\012Put the nozzle back on the machine. Lock it into place and turn the pully to the on postion, and you should be ready to go.
Repair Help & Product Troubleshooting for Vacuums

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

HOW TO REPLACE BELT ON kIRBY cLASSIC 111 vACUM cLEANER?


My husband got home and rescued me! He immediately fixed the problem. ... Vacuums

I am trying to put a belt on my Kirby Classic vacum cleaner i just can't figure it out.


HERE is the belt installation instruction. On your vacuum it is a bit different how the brush roll is installed but I am sure you will be able to figure this out ... Kirby Ultimate G Bagged Upright Vacuum

REPLACING BELT KIRBY CLASSIC III


Http://geeksquad.fixya.com/ThreadView.aspx?prdid=11562&thid=806061\015\012REPLACING BELT KIRBY CLASSIC III\015\012Posted by JETALBOT on July 19, 2008\015\012I CAN ... Kirby Heritage II Vacuum

How to replace a belt on a Kirby G4 vacum


\015\012Here's how you replace the belt on all Kirby Generation Upright Vacuum Cleaners;\015\012\015\012 ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

BELT REPLACEMENT HOOVER WIND TUNNEL VACUM CLEANER


... Hoover Vacuums

How do I replace belt on 2001 G kirby vacuum cleaner ?????


... Kirby Ultimate G Bagged Upright Vacuum

Replace carpet cleaner belt - Kirby Heritage II Vacuum


... Kirby Heritage II Vacuum

How do you replace the belt on my Kirby G5 vacuum cleaner?


Hi There,We've created a great video demonstration on how to replace the belt on Kirby generation vacuum cleaners. This will walk you through step by step on how you can replace the vacuum's belt, as well as do the basic maintenance on ... Kirby G5 Bagged Upright Vacuum

How do I replace the drive belt on a Kirby G5 vacuum cleaner?


Greetings,I have shot an excellent video repair on how to replace the belt on Kirby Generation Vacuum Cleaners including your Generation 5 (G5). The belt change procedure is the same for Kirby Models G3-G10 Sentria. The video is below in ... Kirby G5 Bagged Upright Vacuum

How do I replace a belt on a homedream typhoon vacume cleaner


... Vacuums

HOW DO I REPLACE A KIRBY VACCUUM CLEANER BELT?


I will post a video on youtube for you. ... Kirby G4 Bagged Upright Vacuum

How do i replace my belt on my kirby vaccum cleaner


Hello,\015\012\015\012Please see the following video we've shot on how to replace the belt on a Kirby Generation vacuum cleaner. This should explain to you step by step the procedure to replace the belt. If you need to purchase a belt ... Kirby G4 Bagged Upright Vacuum

How do you replace belt on kirby vacuum cleaner


Try removing the screws under the vacuum by the rotating brush assembly. Remove the cover, loosen the brush to remove the belt and reassemble in reverse. ... Kirby Vacuums

Replacing the fan hub on a kirby classic omega 1CB


I resolved the problem .I found a way to hold the armature shaft still while I unscrewed the pulley drive nut ,which must be removed in order to remove the vacuum fan.\015\012\015\012> There probably is a special tool somewhere that w ... Kirby Heritage II Vacuum

Belt replacement i am trying to replace the belt on my kirby g4 and i can not get the rooler off to replace the belt. if you could tell me how to do this it would be great.


Lift the light bulb housing up and you will find a latch that will rotate to release the front agitator housing and remove it from the machine. On the bottom of that housing, there are two latches that secure the bottom plate that covers the roller. ... Kirby G4 Bagged Upright Vacuum

The belt on my Kirby G3 wore out, and I bought replacement belts from two different sources--one an official Kirby supplier and one a store brand. Neither belt is long enough to catch the belt lifter when it is rotated and to reach the drive shaft.


Kirby has only had 1 belt from day one. sometimes you do need to push the belt up to catch the belt lifter ... Kirby Generation 3 Bagged Upright Vacuum

Hello, my names Travis. I was contacting you in concern of my Kenmore Quick Clean 12AMP Vacum Cleaner. My girlfriend took the bottom off the vacum and removed the belt because the vacum wasnt picking up. I know have a new belt i just dont know where to put it on the vacum to reinstall it


Look for grooves on the motor shaft and on the brush shaft. ... Kenmore Quick Clean 30012 Vacuum

Kirby Vacuum Hi Bruce, In my opinion, yes the Kirby would be worth it, as long as you are not replacing the motor. The switch would be the most expensive part besides the motor that would need to be replaced. The switch costs USD 49.99, the cord is roughly $39.99, and the carbon brushes are $29.99. I can easily walk you through any of these repairs should you need help. Kirby's are great vacuum cleaners, that usually last 30+ years. Brand new these machines sell in the US for $1600 or more,


You can get better prices from Goodvac.com ... Kirby Generation 3 Bagged Upright Vacuum

I replaced my Bissell vacuum cleaner belt with a Bissell belt. I ordered it from them so I know it's the right one. I replaced it and the roller won't spin and the belt smells like it burning.


Beckiande485: You will need to unplug the vacuum from the wall, lay it down so you can see the bottom of the vacuum head and remove the bottom plate (foot plate) Probably philllips head screws. pull up on the roller (called the beater bar). ... Bissell Vacuums

Changing belt on Kirby Classic 1972


When you turned the knob, did it turn easily or hard. If it was easy, then the knob part inside did not catch the belt. If it did turn hard, when you had the brush roll off, did you check the ends to see if they turned easily or not. if not, then r ... Vacuums

Kirby vacuette belt replacement - Douglas Belt for Aardvarc Busy B Vacuette Kirby H/V


You can find plenty of replacement belts here:http://kirbyhomecare.com/belts4.htmlThis article might also help:http://www.ehow.com/how_6434639_change-belt-kirby-ultimate-series.html ... Douglas Belt for Aardvarc Busy B Vacuette Kirby H/V

I have a Zanussi 1700W bagless upright vacuum cleaner which keeps cutting out after about 5/10 mins use. I had to replace the rubber drive belt which snapped not long after purchasing and it was fine for a while, but now its just keeps cutting out after a small amount of use. Nothing wrong with belt which is still intact so we don't know what the problem is. It's a great cleaner otherwise - but it's driving us mad!! Please help!


... Vacuums

I have a Fantom Fury and need to replace the belt. Please tell me how to get into it so the belt can be replaced. It is a Fantom Fury Vacuum Cleaner # 3680093 Fantom Technologies Model # F10051 01


... Vacuums

I need instructions on replacing the belt that drives the brushes on a Bissell powersteamer pro deluxe carpet cleaner. Could the broken belt have anything to do with the suction of the cleaner?


Here is a link to the belts you need and a link to the manual:Bissell 1697-7 Manual and Replacement Belts ... Bissell 1697-7 Powersteamer Pro Deluxe Vacuum

Replace belt and dyson vacuam cleaner, model dc14 I ordered a new belt and brush replacement assembly and we can't seem to understand how to get it apart to change it


If the DC14 has a brush protected aspect i.e. a switch on the front that puts the drive belt off, the drive belt would have to be replaced by a professional repairer as this can't be done at home. \015\012\015\012If the model doesn't have the b ... Dyson DC14 All floors Bagless Upright Cyclonic Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1026 seconds