Having problems with your Vacuums ?

Windsor Sensor Vacuum

\015 The bag full light comes on and after a minute or so, the power shuts off. The bag is new.\015

Answers :

Mine did this and i took it apart and in the base are two connectors that were rusted...i sanded them and it worked fine after that
Pull out the wand (while the unit is running). If this turns off the light, then the clog is in the base-- try turning it so you can see the bottom, and there's a door (I've seen some orange and some white)-- check for a clog in there.

If pulling out the wand doesn't help, unclip and pull out the hose at the end opposite the wand. If this fixed the problem, the problem is in the hose.

If neither of the above worked, it's a bag problem or filter problem, or it could be in the motor.
Repair Help & Product Troubleshooting for Vacuums

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Windsor Sensor XP18 brush - Windsor SR12 Sensor Bagged Upright Vacuum


... Windsor SR12 Sensor Bagged Upright Vacuum

My windsor sensor xp12 wont turn on - Windsor SR12 Sensor Bagged Upright Vacuum


... Windsor SR12 Sensor Bagged Upright Vacuum

Windsor s12 turns of and on when using - Windsor SR12 Sensor Bagged Upright Vacuum


... Windsor SR12 Sensor Bagged Upright Vacuum

My windsor sensor 12 inch vacuum is to hard to push. I bought a new one and its doing the same thing. My vacuum repair man says he cant fix the problem. My shoulders are sore from working so hard. Help


It\\'s possibly the type of carpet you\\'re using it on. The sensors use the brush speed and the amount of air flow to determine carpet height. Some berber, and tweeds make these things horrible to push. We sell sebo, who make the windsor and we\\'ve ... Windsor SR12 Sensor Bagged Upright Vacuum

Sensor xp 15 shutting down - Winsor Windsor SENSOR XP 12 Vacuum


If you have one of your red lights flashing or on all the time that will indicate where you need to look for your repair. Beater bar light will indicate a brush roll replacement and the bag light indicates a need to empty the bag or look for a clog ... Winsor Windsor SENSOR XP 12 Vacuum

My vacuum windsor sensor 12 is not working. I have relaced the bag, the sensor, the roller, the cord and the air filter but is not working. can you help me?


... Windsor SR12 Sensor Bagged Upright Vacuum

I have a Windsor Sensor s12 and power shuts off after 5 min. of vacuuming. I'm wondering if it's overheating of if there is some other sensor that causes it to shut off.


Your Sensor most likely has an internal heat sensor that is shutting off the motor. Some vacuums install an external heat sensor with a reset button that you must push to re-start the vacuum. If your model does not have an external reset button it is ... Windsor SR12 Sensor Bagged Upright Vacuum

Need to replace vacuum door - Windsor SR12 Sensor Bagged Upright Vacuum


I pried up the back of the cover holding the height adjustment wheel and was able to snap the cover axle with the cover installed into place. ... Windsor SR12 Sensor Bagged Upright Vacuum

Windsor Sensor XP18 Vacuum


Go to www.windsorind.com/documents/servicemanuals and print out the PDF document. John ... Windsor SR12 Sensor Bagged Upright Vacuum

Need to replace belt on Windsor Sensor 12 vacuum


... Windsor SR12 Sensor Bagged Upright Vacuum

Windsor Sensor 12 Vacuum No Power


I'm an engineer for Hyatt hotels and I've worked with the S12 vacuums for a few years now. The most common problem electrically lies in the main switch and the power cord. Almost at no time in the past three years and working for 4 hotels have I had ... Vacuums

Windsor Sensor Vacuum


Mine did this and i took it apart and in the base are two connectors that were rusted...i sanded them and it worked fine after that ... Vacuums

How do you disassemble a windsor sensor s12 vacuum


... Windsor SR12 Sensor Bagged Upright Vacuum

No Power to Windsor Sensor XP12


The Windsor Sensor vacs all have a removable handle.\015\012\015\012The handle is inserted into a "socket" which has contacts to complete the electrical circuit.\015\012\015\012The handle is held in place by a gray plastic lev ... Windsor SR12 Sensor Bagged Upright Vacuum

Hello! I have a Kenmore Progressive bagless vacuum with the Easy Clean extended life filter. The model number on my vacuum is 34728401. I was vacuuming the carpet when it just stopped running. The dirt sensor light will come on, but nothing else. The belt looks fine, and I don't see anything keeping the beaters from rotating. Help Please!!!


You can have power to the dirt light sensor, but it seems like the motor itself is not using the power supplied. ... Vacuums

Clogged vacuum cleaner windsor sr12 bagged upright vacuum


... Windsor SR12 Sensor Bagged Upright Vacuum

Cannister vacuum cleaner bag full sensor faulty.


... Electrolux Vacuums

How to clean roomba sensor - iRobot 530 Roomba Vacuuming Robot, White Vacuum


... iRobot 530 Roomba Vacuuming Robot, White Vacuum

The Dirt Sensor lights will not go out. It doesn't matter if I am vacuuming carpet or tile floor, the dirt sensors are all lite up. I can't locate my owners manual.


Your machine could be clogged, check the tools for suction. If its a bag less model you might need to clean or replace your filters. ... Kenmore Vacuums

I have a windsor vsp 14, it is making a bad grinding noise, when I take the top blue piece off it stops, the brush works fine and when I put the top back on it grinds really loud and gets hot. it still vacuums and the belt and brush are working fine, can't figure it out. and when the lid is on I cant see what its grinding on. It only makes a grinding noise when you pull handle back and engade to vacuum flor and stops when you put it upright.


... Windsor VS14 Versamatic Bagged Upright Vacuum

I have a Kenmore Elegance Vacuum with Dirt Sensor, Model # 116.30750400C, Serial number M41901532. When vacuuming the carpet the power head will work for 3-6 mins then automatically shut off, power is still there and lights work but the power head motor turns off and the suction stops. I will turn it off and on, check the outlet, flick the on off buttons...nothing. I will turn it off for a couple minutes and it turns back on and runs like normal. I've check the bags, filters, cleaned the hos


It is an electrical problem in the handle, if you can or know somebody that has any fix it ability it can be fixed in about ten minutes. Oh, and Sears SUCKS!! ... Kenmore 34612 Bagged Upright Vacuum

Have dirt sensor light on continuously on Kenmore Progressive canister vacuum cleaner...lost manual, do not know where sensors are so can clean them. Could not find answer on the site or from Kenmore. Thanks.


... Kenmore 25812 / 25813 Progressive Bagged Canister Vacuum

Sensor light stays red no matter how long I vacuum. I think the sensor light is broken.


I think you have a clog and/or a dirty filter.\015\012\015\012Check all hoses - dont just look at them ... disconnect them - run something through them - check completely. I pick up dozens of discarded machines from the trash heap - more ... Kenmore Vacuums

Brush won't turn vs14 windsor versamatic - Windsor VS14 Versamatic Bagged Upright Vacuum


... Windsor VS14 Versamatic Bagged Upright Vacuum

I am having problems with the roller on my Oreck DTX-1300. It turns on and off intermittantly while I'm vacuuming. I have completly taken it apart and cleaned and inspected the roller unit.(I am very much mechanically inclined) This has stumped me, I have checked the electrical from the vacuum to the floor unit, and everything else that I could think of. Question: what does the metal sensore plate on the bottom of the roller unit do?? Anything anybody can tell me, I would greatly appreciate. Cap


... Oreck DutchTech DTX1300A Bagged Canister Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0831 seconds