Having problems with your Bissell 1697-7 Powersteamer Pro Deluxe Vacuum ?

I need the belt that makes the brush spin - Bissell 1697-7 Powersteamer Pro Deluxe Vacuum


Answers :

Repair Help & Product Troubleshooting for Bissell 1697-7 Powersteamer Pro Deluxe Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I need the belt that makes the brush spin - Bissell 1697-7 Powersteamer Pro Deluxe Vacuum


Here is the belt you need:http://www.vacbelts.com/bissell-6960-w-belt-combo-pack.htm ... Bissell 1697-7 Powersteamer Pro Deluxe Vacuum

Need to replace a brush belt - Bissell 1697-7 Powersteamer Pro Deluxe Vacuum


Accessories and replacement parts for your Bissell 1697 Powersteamer Pro are available here:\012\012 ... Bissell 1697-7 Powersteamer Pro Deluxe Vacuum

I need instructions on replacing the belt that drives the brushes on a Bissell powersteamer pro deluxe carpet cleaner. Could the broken belt have anything to do with the suction of the cleaner?


Here is a link to the belts you need and a link to the manual:Bissell 1697-7 Manual and Replacement Belts ... Bissell 1697-7 Powersteamer Pro Deluxe Vacuum

I have a Bissell Powersteamer Pro Deluxe, Model 8804 shampooer. I got this bright idea to take the brush off as it was full of hair and debree. Upon putting it back on it appears I'm not getting the brush on properly. Does the belt go around the end with the grooves? Also do the grooves go on the right or left side? From my view point I am looking at the machine with it lying on it's back and I am sitting on the floor looking at the bottom of machine. Sure hope I haven't confused you too m


... Bissell 1697-7 Powersteamer Pro Deluxe Vacuum

Belt replacement for bissell 1697-1 - Bissell 1697-7 Powersteamer Pro Deluxe Vacuum


... Bissell 1697-7 Powersteamer Pro Deluxe Vacuum

Powersteamer making loud noise - Bissell 1697-7 Powersteamer Pro Deluxe Vacuum


... Bissell 1697-7 Powersteamer Pro Deluxe Vacuum

Change brush belt - Bissell 1697W Powersteamer Pro Upright Vacuum


... Bissell 1697W Powersteamer Pro Upright Vacuum

How do you replace belts - Bissell 1697-7 Powersteamer Pro Deluxe Vacuum


Here is the manualhttp://canada.bissell.com/images/UserGuides/1697C.pdfbelt change video ... Bissell 1697-7 Powersteamer Pro Deluxe Vacuum

Flow indicator not spinning - Bissell 1697-7 Powersteamer Pro Deluxe Vacuum


If you took it out you might not have put it in right the small round white piece with the little thing sticking out of it needs to facing up and the red thing that spins sits on top of the white pin, if it is in right then Replace your b ... Bissell 1697-7 Powersteamer Pro Deluxe Vacuum

I have a problem with my model 6585-3 bissell upright powerforce bagless turbo with turbo brush vacuum The brush has quit spinning upon removal i noticed that one side of the brush was free to spin the other side that has the rectangular piece to help hold into place seems to be locked up and will not spin is it corroded or have i lost a piece that joins with it that allows it to spin freely belts are good and motor is turning brush will not budge


... Vacuums

I have a Bissell Pro Heat 2X carpet cleaner and the brushes spin, then stop. I turn it off and when I re-start, the brushes do not spin until I push foreward. The it spins and stops again. Both belts are tight. The brushes spin if held above the carpet, but upon contact with carpet it stops. Same thing on a hard surface.


The reason for the brushes to stop when it is above any surface is there is a switch in the handle that stops the brushes so it dont burn your motor up it may have a faulty switch. ... Bissell Carpet Cleaner Powerbrush Deep Cleaner Vacuum

Shark Euro-pro EP621 Bagless Upright Vacuum. Q regarding the brush not spinning / after troubleshooting and taking actions listed below, it now spinning for a few secs, but then stopping. Already removed hair, strings, etc. Checked that belt is aligned properly, checked that small wheel that turns belt is working (spins fine when belt removed. Oiled the turning parts a bit, that made it spin better, but still stops. It turns about 3-4 seconds then stops. If I switch it off and on again, I get ag


... Euro-Pro EP621 Bagless Upright Vacuum

I have the bissell power force bagged upright vacuum and the brush is not turning, I have replaced the belt but the brush will not move but the metal piece that is hooked to the motor that spins the belt and brush is turning but the brush won't, and the belt starts to burn


Sounds like your brush roll is seized. Remove the brush roll (see picture) and make both of the end caps spin freely. If not, replace it and you should be set. *An example of a brush roll* ... Bissell 3522 PowerForce Bagged Upright Vacuum

Bissell Power Track Cyclonic Upright Bagless Vacuum.. ..The spin brush works laying down....when upright it won't spin! I cleaned any and all hair from the roller....belt is not broken....but do I need a new belt though? The vac is a few years old bever replaced the belt yet.


You need a new belt. ... Vacuums

I have a Bissell Lift-off Revolution Turbo vacuum and the brush doesn't spin on its own anymore. Does this mean the motor is busted because there's no noise when you press the brush button. We've just replaced the belt, hepa filter and a new brush. But its still the same. What's wrong with my vacuum?


Its probably the motor. remove the covers with a #2 phillips head screwdriver and cut the wires to the motor ( unplugged ). purchase some crimps at radio shack to resplice the wires together in the same fashion. ... Bissell Vacuums

No Suction/Brush not spinning on Bissell Powersteamer Pro Deluxeb


Make sure hoses are clear and check belt ... Vacuums

Loud noise in bissell powersteamer - Bissell 1697-7 Powersteamer Pro Deluxe Vacuum


... Bissell 1697-7 Powersteamer Pro Deluxe Vacuum

We have the Bissell Lift off Revolution vacuum. The brush roll and belt are broken. The brush roll has seized up and no longer spins which caused the belt to burn out. How much is a replacement part cost? Debie [email protected]


You can get the belts for that model here: http://vacbelts.xps.convina.com/bissell-style-8-belt.htmThey are only 4.99 for a 2 pack. Plus they ... Vacuums

I have a Bissell pet hair eraser model #3920. It's been working great until last night. I went to use it and the brush won't spin. It also smells like it's burning. I checked the belt and it looks fine, and the brush spins by hand easily. It's not clogged anywhere that I can see. Anyone have any other ideas? This vacuum is only 8 months old.


- Remove the access panel, which is on the bottom of the machine. There are 4 tabs to lift on the access panel to remove. Start with tab 1 then 2-4 tabs.- Check the brush, and belt for any damage. Clean off any debris on the brush. ... Bissell 3920 Bagless Upright Vacuum

Bissell Pro 2X. The brushes spin as soon as I turn it on but only spins for an instant then it quits spinning. The vacuum stays running. the handle is down.


It might be the drive belt slipping if the unit is off then the belt is locked onto the belt and then when the unit is switched on the belt slips and if its loose it doesnt hold the belt to the motor shaft  ... Bissell 9200 Upright Vacuum

Bissell powerbrush stop spraying water. - Bissell 1697-7 Powersteamer Pro Deluxe Vacuum


... Bissell 1697-7 Powersteamer Pro Deluxe Vacuum

Bissell Pro-Heat 7901-1 no cleaning solution is pumped out. The flow indicator is spinning and the belt is spinning the beater bar. Have cleaned the flow indicator, checked vavles in the solution tank and water tank and they are working properly. Also checked the trigger to make sure it works okay. Any ideas?? Moody Fan


Bissell Pro Heat shampooer - Fill the soap dispenser with extremely hot water and shampoo with only water for a few minutes. There is often dried soap in the lines. Make sure that all filters are clean. Press the soap container and the water conta ... Bissell 7901-1 ProHeat Scotchgard Upright Wet/Dry Vacuum

My bissell 1694e wont spray water - Bissell 1697-7 Powersteamer Pro Deluxe Vacuum


... Bissell 1697-7 Powersteamer Pro Deluxe Vacuum

Reassemble bissell 1697 - Bissell 1697-7 Powersteamer Pro Deluxe Vacuum


BISSELL User's Guides can be downloaded at www.bissell.com\012On the front page under Customer Service click on User's Guides and enter the model number of your unit.\012User Guide will be displayed as a PDF file. ... Bissell 1697-7 Powersteamer Pro Deluxe Vacuum

My bissell wont release water or cleaner - Bissell 1697-7 Powersteamer Pro Deluxe Vacuum


Make sure there is liquid in both the Tank-in-Tank and the SmartMix Bottle and check for spray through the upholstery hose. If the hose does not spray please check the following:\012 \012- Remove the belt access door and inspect ... Bissell 1697-7 Powersteamer Pro Deluxe Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1772 seconds