Having problems with your Bissell 1697-7 Powersteamer Pro Deluxe Vacuum ?

No suction - Bissell 1697-7 Powersteamer Pro Deluxe Vacuum


Answers :

Try the following suggestions to see if you can get your machine suctioning properly:
\015\012
\015\0121) Remove the Tank-in-Tank Assembly and place your hand over the motor intake valve. This valve is located next to the Floor Nozzle gasket (at the top of the Floor Nozzle window) and behind the SmartMix Bottle. If you feel vacuum-like suction at this area, your suction power of the unit is working but air is escaping at some point. If there is no suction at the motor intake valve your machine will need to be inspected by an Authorized Service Center Technician.
\015\0122) It is possible the Floor Nozzle on your machine is inserted incorrectly. This would directly affect the suction of your machine. Please follow the directions below for removing and replacing the nozzle.
\015\012Before starting, please be sure the machine is unplugged and the machine handle is reclined.
\015\012To remove the Floor Nozzle window, first detach the Phillips head screws located at the base of the nozzle. Then, remove the Tank-in-Tank Assembly. Next, pull forward at the top of the Floor Nozzle window to release the tabs of this window from the receiving holes of the machine. This window is designed to allow access for cleaning.
\015\012When replacing the Floor Nozzle window, please be sure the tabs at the TOP of the nozzle are properly inserted into the receiving holes provided. If you do not have the tabs in place properly, the suction power of the machine could be affected.
\015\012Rotate the window down into place and replace the screws.
\015\0123) Ensure that the Ready Tools knob (diverter knob) is in the proper setting and the valve opens and closes freely. Ensure the black foam gasket is in place under the valve.
\015\0124) Check to ensure the Tank-in-Tank assembly is seated properly and that it is not full of dirty water. (If this tank has a drain cap, make sure it is in place and that it has a black o-ring).
\015\0125) Check the float and baffle to ensure they are properly installed on the Tank-in-Tank. The larger square portion of this part should be below the clear baffle of the tank with the red flag portion of the float resting on top of the baffle.
\015\0126) Check the Tank-in-Tank and lid for damage. Is the lint screen clogged? Make sure the lint screen is in place on the tank lid and not placed into the motor duct. Also, clear the holes on the lint screen.
\015\0127) Check to see if the upholstery hose has suction. If the hose has suction and the floor nozzle does not, check the diverter valve to see if it opens and closes freely. This can be seen through the Floor Nozzle window as you switch the diverter knob from the floor to tools setting.
\015\012
\015\012If these suggestions do not solve the problem, have a technician at a local BISSELL Authorized Service Center inspect your machine.
\015\012To locate your nearest BISSELL Authorized Service Center, please go to www.bissell.com. Click on the Customer Support tab near the top of the homepage and enter your zip code in the Service Center locator box to perform your search.
\015\012
\015\012You can also locate a Service Center by phone, 24 hours a day, by calling 1-800-237-7691 and choosing option #1.
Repair Help & Product Troubleshooting for Bissell 1697-7 Powersteamer Pro Deluxe Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

No suction - Bissell 1697-7 Powersteamer Pro Deluxe Vacuum


Try the following suggestions to see if you can get your machine suctioning properly:\015\012\015\0121) Remove the Tank-in-Tank Assembly and place your hand over the motor intake valve. This valve is located next to the Floor Nozzle gaske ... Bissell 1697-7 Powersteamer Pro Deluxe Vacuum

Loud noise in bissell powersteamer - Bissell 1697-7 Powersteamer Pro Deluxe Vacuum


... Bissell 1697-7 Powersteamer Pro Deluxe Vacuum

Bissell powerbrush stop spraying water. - Bissell 1697-7 Powersteamer Pro Deluxe Vacuum


... Bissell 1697-7 Powersteamer Pro Deluxe Vacuum

Reassemble bissell 1697 - Bissell 1697-7 Powersteamer Pro Deluxe Vacuum


BISSELL User's Guides can be downloaded at www.bissell.com\012On the front page under Customer Service click on User's Guides and enter the model number of your unit.\012User Guide will be displayed as a PDF file. ... Bissell 1697-7 Powersteamer Pro Deluxe Vacuum

Belt replacement for bissell 1697-1 - Bissell 1697-7 Powersteamer Pro Deluxe Vacuum


... Bissell 1697-7 Powersteamer Pro Deluxe Vacuum

My bissell wont release water or cleaner - Bissell 1697-7 Powersteamer Pro Deluxe Vacuum


Make sure there is liquid in both the Tank-in-Tank and the SmartMix Bottle and check for spray through the upholstery hose. If the hose does not spray please check the following:\012 \012- Remove the belt access door and inspect ... Bissell 1697-7 Powersteamer Pro Deluxe Vacuum

My bissell 1694e wont spray water - Bissell 1697-7 Powersteamer Pro Deluxe Vacuum


... Bissell 1697-7 Powersteamer Pro Deluxe Vacuum

Bissell 31K8 10195C - Bissell 1697-7 Powersteamer Pro Deluxe Vacuum


... Bissell 1697-7 Powersteamer Pro Deluxe Vacuum

Powersteamer making loud noise - Bissell 1697-7 Powersteamer Pro Deluxe Vacuum


... Bissell 1697-7 Powersteamer Pro Deluxe Vacuum

Commerical Bissell 31K8 - Bissell 1697-7 Powersteamer Pro Deluxe Vacuum


... Bissell 1697-7 Powersteamer Pro Deluxe Vacuum

Thank you for the great picture. Jon - Bissell 1697-7 Powersteamer Pro Deluxe Vacuum


You welcome.. ... Bissell 1697-7 Powersteamer Pro Deluxe Vacuum

Water dosn't came out - Bissell 1697-7 Powersteamer Pro Deluxe Vacuum


Hi Kay. I know how frustrating no spray can be when you're ready to clean.Here's a quick link to troubleshooting steps to assist you:\015\012http://www ... Bissell 1697-7 Powersteamer Pro Deluxe Vacuum

Solution will not spray only water. - Bissell 1697-7 Powersteamer Pro Deluxe Vacuum


Go to bisssell.com ... Bissell 1697-7 Powersteamer Pro Deluxe Vacuum

How to stop leaking fro bottom of machine - Bissell 1697-7 Powersteamer Pro Deluxe Vacuum


I've fixed these before and it's not easy. Your leak is a tear on the flexible hose that goes from the suction take-up body to the upright handle. Tape will temp. fix it, but you have to cut off the bad piece and re-attach it if you want a permanent ... Bissell 1697-7 Powersteamer Pro Deluxe Vacuum

How do you replace belts - Bissell 1697-7 Powersteamer Pro Deluxe Vacuum


Here is the manualhttp://canada.bissell.com/images/UserGuides/1697C.pdfbelt change video ... Bissell 1697-7 Powersteamer Pro Deluxe Vacuum

Flow indicator not spinning - Bissell 1697-7 Powersteamer Pro Deluxe Vacuum


If you took it out you might not have put it in right the small round white piece with the little thing sticking out of it needs to facing up and the red thing that spins sits on top of the white pin, if it is in right then Replace your b ... Bissell 1697-7 Powersteamer Pro Deluxe Vacuum

Will not spray water - Bissell 1697-7 Powersteamer Pro Deluxe Vacuum


That means that you need to replace the pump belt. Her is the belt you need and the manual:Bissell 1697 Proheat Belt and Manual ... Bissell 1697-7 Powersteamer Pro Deluxe Vacuum

Rug shampor won't spray the liquid - Bissell 1697-7 Powersteamer Pro Deluxe Vacuum


That means that you need to replace the pump belt. Here is the belt you need and a manual you can view:Bissell 1697 Belt and Manual ... Bissell 1697-7 Powersteamer Pro Deluxe Vacuum

I need instructions on replacing the belt that drives the brushes on a Bissell powersteamer pro deluxe carpet cleaner. Could the broken belt have anything to do with the suction of the cleaner?


Here is a link to the belts you need and a link to the manual:Bissell 1697-7 Manual and Replacement Belts ... Bissell 1697-7 Powersteamer Pro Deluxe Vacuum

Water not sucking up - Bissell 1697-7 Powersteamer Pro Deluxe Vacuum


... Bissell 1697-7 Powersteamer Pro Deluxe Vacuum

How do i use it, full instructions please - Bissell 1697-7 Powersteamer Pro Deluxe Vacuum


The full product manual for this Vacuum can be found at: http://www.bissell.com/assets/0/132/134/228/14489708-7c37-4678-a90a-79e6825ef104.pdf\015\012\015\012Good luck! ... Bissell 1697-7 Powersteamer Pro Deluxe Vacuum

Steam cleaner not spraying soap - Bissell 1697-7 Powersteamer Pro Deluxe Vacuum


That means that the pump belt is worn or stretched and needs to be replaced. Here is a link to the belt you need and the manual which has instructions: ... Bissell 1697-7 Powersteamer Pro Deluxe Vacuum

Need to replace a brush belt - Bissell 1697-7 Powersteamer Pro Deluxe Vacuum


Accessories and replacement parts for your Bissell 1697 Powersteamer Pro are available here:\012\012 ... Bissell 1697-7 Powersteamer Pro Deluxe Vacuum

I need the belt that makes the brush spin - Bissell 1697-7 Powersteamer Pro Deluxe Vacuum


Here is the belt you need:http://www.vacbelts.com/bissell-6960-w-belt-combo-pack.htm ... Bissell 1697-7 Powersteamer Pro Deluxe Vacuum

My cleaner won't pick up the dirty water - Bissell 1697-7 Powersteamer Pro Deluxe Vacuum


Normal\012 0\012 \012 \012 \012 \012 \012 \012 MicrosoftInternetExplorer4\012 \012\012\012\012\012\012 /* Style Definitions */\012 table.MsoNormalTable\012\011{mso-style-name:"Table Normal";\012\011mso-tstyle-rowband-size:0;\012\011mso-ts ... Bissell 1697-7 Powersteamer Pro Deluxe Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1374 seconds