Having problems with your Bissell 1698 PowerSteamer ProHeat Upright Wet/Dry Vacuum ?

No suction - Bissell 1698 PowerSteamer ProHeat Upright Wet/Dry Vacuum


Answers :

Try the following suggestions to see if you can get your machine suctioning properly:
\015\012
\015\0121) Remove the Tank-in-Tank Assembly and place your hand over the motor intake valve. This valve is located next to the Floor Nozzle gasket (at the top of the Floor Nozzle window) and behind the SmartMix Bottle. If you feel vacuum-like suction at this area, your suction power of the unit is working but air is escaping at some point. If there is no suction at the motor intake valve your machine will need to be inspected by an Authorized Service Center Technician.
\015\0122) It is possible the Floor Nozzle on your machine is inserted incorrectly. This would directly affect the suction of your machine. Please follow the directions below for removing and replacing the nozzle.
\015\012Before starting, please be sure the machine is unplugged and the machine handle is reclined.
\015\012To remove the Floor Nozzle window, first detach the Phillips head screws located at the base of the nozzle. Then, remove the Tank-in-Tank Assembly. Next, pull forward at the top of the Floor Nozzle window to release the tabs of this window from the receiving holes of the machine. This window is designed to allow access for cleaning.
\015\012When replacing the Floor Nozzle window, please be sure the tabs at the TOP of the nozzle are properly inserted into the receiving holes provided. If you do not have the tabs in place properly, the suction power of the machine could be affected.
\015\012Rotate the window down into place and replace the screws.
\015\0123) Ensure that the Ready Tools knob (diverter knob) is in the proper setting and the valve opens and closes freely. Ensure the black foam gasket is in place under the valve.
\015\0124) Check to ensure the Tank-in-Tank assembly is seated properly and that it is not full of dirty water. (If this tank has a drain cap, make sure it is in place and that it has a black o-ring).
\015\0125) Check the float and baffle to ensure they are properly installed on the Tank-in-Tank. The larger square portion of this part should be below the clear baffle of the tank with the red flag portion of the float resting on top of the baffle.
\015\0126) Check the Tank-in-Tank and lid for damage. Is the lint screen clogged? Make sure the lint screen is in place on the tank lid and not placed into the motor duct. Also, clear the holes on the lint screen.
\015\0127) Check to see if the upholstery hose has suction. If the hose has suction and the floor nozzle does not, check the diverter valve to see if it opens and closes freely. This can be seen through the Floor Nozzle window as you switch the diverter knob from the floor to tools setting.
Repair Help & Product Troubleshooting for Bissell 1698 PowerSteamer ProHeat Upright Wet/Dry Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

No suction - Bissell 1698 PowerSteamer ProHeat Upright Wet/Dry Vacuum


Try the following suggestions to see if you can get your machine suctioning properly:\015\012\015\0121) Remove the Tank-in-Tank Assembly and place your hand over the motor intake valve. This valve is located next to the Floor Nozzle gaske ... Bissell 1698 PowerSteamer ProHeat Upright Wet/Dry Vacuum

Bissell proheat no hose suction - Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum


Normal\012 0\012 \012 \012 \012 \012 \012 \012 MicrosoftInternetExplorer4\012 \012\012\012\012\012\012 /* Style Definitions */\012 table.MsoNormalTable\012\011{mso-style-name:"Table Normal";\012\011mso-tstyle-rowband-size:0;\012\011mso-ts ... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum

No suction on bissell proheat - Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum


Normal\012 0\012 \012 \012 \012 \012 \012 \012 MicrosoftInternetExplorer4\012 \012\012\012\012\012\012 /* Style Definitions */\012 table.MsoNormalTable\012\011{mso-style-name:"Table Normal";\012\011mso-tstyle-rowband-size:0;\012\011mso-ts ... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum

Tubing for bissell proheat - Bissell 1698 PowerSteamer ProHeat Upright Wet/Dry Vacuum


Normal\012 0\012 \012 \012 \012 \012 \012 \012 MicrosoftInternetExplorer4\012 \012\012\012\012\012\012 /* Style Definitions */\012 table.MsoNormalTable\012\011{mso-style-name:"Table Normal";\012\011mso-tstyle-rowband-size:0;\012\011mso-ts ... Bissell 1698 PowerSteamer ProHeat Upright Wet/Dry Vacuum

My bissell proheat wont disperse water - Bissell 1698-1 PowerSteamer ProHeat Plus Upright Vacuum


Hi,Here is a tip that will give you all the information you need to fix your Bissell Proheat Vacuum Problem.B ... Bissell 1698-1 PowerSteamer ProHeat Plus Upright Vacuum

My bissel proheat has no suction - Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum


Normal\012 0\012 \012 \012 \012 \012 \012 \012 MicrosoftInternetExplorer4\012 \012\012\012\012\012\012 /* Style Definitions */\012 table.MsoNormalTable\012\011{mso-style-name:"Table Normal";\012\011mso-tstyle-rowband-size:0;\012\011mso-ts ... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum

Loss of suction on a bissell proheat pet - Bissell 1699 ProHeat Clear View Upright Steam Vacuum


... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

Suction not working on a bissel proheat - Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum


... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum

The bissell proheat will not suction - Bissell ProHeat Turbo Deep Cleaner Upright Steam Vacuum


Try the following suggestions to see if you can get your machine suctioning properly:\015\012\015\0121) Remove the Tank-in-Tank Assembly and place your hand over the motor intake valve. This valve is located next to the Floor Nozzle gaske ... Bissell ProHeat Turbo Deep Cleaner Upright Steam Vacuum

My Bissell 25A3 ProHeat wont spray water - Bissell 1698 PowerSteamer ProHeat Upright Wet/Dry Vacuum


I had two problems. No water was coming out of the main unit (it was working fine via the powerbrush) and the flow indicator wasn't spinning. Because I'm out of warranty, I did two things (after trying all the options that were posted).\015\012 ... Bissell 1698 PowerSteamer ProHeat Upright Wet/Dry Vacuum

My bissell does not **** up water very well - Bissell 1698 PowerSteamer ProHeat Upright Wet/Dry Vacuum


Hi,Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.Bissell Proheat Upright Wet/ ... Bissell 1698 PowerSteamer ProHeat Upright Wet/Dry Vacuum

Not letting water out of vacuum - Bissell 1698 PowerSteamer ProHeat Upright Wet/Dry Vacuum


If it is not pumping water out of the vacuum that means that the pump belt is worn. Here is a link to the belt you need and a manual you can view: ... Bissell 1698 PowerSteamer ProHeat Upright Wet/Dry Vacuum

Belts fine but no suction Bissell 8910 - Bissell 8910 ProHeat Clear View Upright Vacuum


Here are some simple troubleshooting steps to help out: http://www.bissell.com/FAQDetail.aspx?id=1098 ... Bissell 8910 ProHeat Clear View Upright Vacuum

Bissell Powersteamer Instructions - Bissell 8910 ProHeat Clear View Upright Vacuum


... Bissell 8910 ProHeat Clear View Upright Vacuum

My bissell 2x has little to no suction - Bissell ProHeat Turbo Deep Cleaner Upright Steam Vacuum


Here's a quick link to tips to help take care of your issue:\015\012http://www.bissell.com/FAQDetail.aspx?id=1124&cid=ccsocial ... Bissell ProHeat Turbo Deep Cleaner Upright Steam Vacuum

My Bissell has NO suction! - Bissell 7901-R Clearview Proheat Plus Upright Vacuum


... Bissell 7901-R Clearview Proheat Plus Upright Vacuum

Bissel carpet cleaner soap not dispensing - Bissell 1698-1 PowerSteamer ProHeat Plus Upright Vacuum


... Bissell 1698-1 PowerSteamer ProHeat Plus Upright Vacuum

NO SUCTION FROM FLOOR UNIT - Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum


In the bladder lid there is the float trap and there is a screen there that may need to be cleaned ... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum

How to work it - Bissell 1698 PowerSteamer ProHeat Upright Wet/Dry Vacuum


Follow link below for a copy of the User's Guide.\012http://www.bissell.com/search ... Bissell 1698 PowerSteamer ProHeat Upright Wet/Dry Vacuum

How do i work it - Bissell 1698 PowerSteamer ProHeat Upright Wet/Dry Vacuum


Follow the link below for a copy of the User's Guide.\012http://www.bissell.com/se ... Bissell 1698 PowerSteamer ProHeat Upright Wet/Dry Vacuum

Water does not dispense from tools and hose - Bissell 1698 PowerSteamer ProHeat Upright Wet/Dry Vacuum


That always happens to me to!! i know it stinks haha, well the problem is your hose is probobly filled up with debree or you didnt set the knob to tools. if it still dosent work take it to a shop, ... Bissell 1698 PowerSteamer ProHeat Upright Wet/Dry Vacuum

Power cut out during cleaning - Bissell 1698-1 PowerSteamer ProHeat Plus Upright Vacuum


1 could have hit the thermal shut off. if it gets to hot they shut off, or it could be the cord some times they just go bad or it could be something else. Good Luck! ... Bissell 1698-1 PowerSteamer ProHeat Plus Upright Vacuum

Water is not getting through to carpet - Bissell 1698 PowerSteamer ProHeat Upright Wet/Dry Vacuum


Check all hoses and make sure the pump is working ... Bissell 1698 PowerSteamer ProHeat Upright Wet/Dry Vacuum

Brushes won't turn - Bissell 1698 PowerSteamer ProHeat Upright Wet/Dry Vacuum


I did not read the entire manual, but I believe this should help you find your problem. http://ne ... Bissell 1698 PowerSteamer ProHeat Upright Wet/Dry Vacuum

Model#7901-h where do all the hoses go? - Bissell 1698 PowerSteamer ProHeat Upright Wet/Dry Vacuum


... Bissell 1698 PowerSteamer ProHeat Upright Wet/Dry Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1020 seconds