Having problems with your Bissell 1699 ProHeat Clear View Upright Steam Vacuum ?

System will spray soap, but no water is mixed.

\015 System is only spraying soap and no water. Removed covers. I have vacuum after valve that adjust soap/water mixture. If I connect water directly to outgoing hose I get water, but not through valve. O-ring on valve seems fine. valve is a simple needle valve.. it doesn't make sense that I get soap and no water.\015

Answers :

I had the same problem. After 3 weeks of seals belts pump etc. I was ready to give up.
The problem with mine as I suspect with others is the seal on the water tank.
The bottom plastic connector is not high enough to allow the water to flow to the pump.
My solution was to raise the bottom connector 3/16 of an inch.
I did this with a piece of plastic cut like a flat washer or auto gasket material could be used.
The connector must be removed from the bottom by pressing on the tabs. Hope this helps.
Repair Help & Product Troubleshooting for Bissell 1699 ProHeat Clear View Upright Steam Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

System will spray soap, but no water is mixed.


I had the same problem. After 3 weeks of seals belts pump etc. I was ready to give up.The problem with mine as I suspect with others is the seal on the water tank.The bottom plastic connector is not high enough to allow the water to flow ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

Have a bissell pro steam cleaner the suction is great but the water leaks out the bottom I think it should spray from the front and the soap cleaner won't dispense from the bottle so I have to mix the soap cleaner in with the water Any solutions


Use this guide!\015\012http://newzealand.bissell.com/images/IncludeContent/Service_Center_Help ... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum

My bissell 2 x won't mix the cleaner with the water but sprays water just fine.


... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum

Bissell will spray water when set to water rinse, but as soon as it is set to light, normal, or heavy cleaning, there is no spray. I have tried priming but to no avail. I put plain water in the solution tank to test without ay success. It is like it loses it's prime whenever you try to use a solution mix. Once you set it back to water rinse only and go through the priming steps, it is OK. Any help would be appreciated. Thanks.


Please check the following with liquid in both tanks.\012 \012- Check to see if the machine will spray through the hose with the setting on tools. If it does, the pump is fine. Continue troubleshooting.\012- Check for ... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum

Bissell proheat My Bissell won't dispense cleaning formula but it sprays water and sucks up the water. The attachments spray water but not the soap also. how to fix?


First is the smart mix valve turning like it should? If it is then replace the soap dispensor. Also is the gasket on the valve at the bottom of the bottle? ... Bissell 1698 PowerSteamer ProHeat Upright Wet/Dry Vacuum

Bissell 1425 Little Green ProHeat Steam Cleaner - had a problem with leaking. I got replacement parts, installed in the water / soap tank, now it won't spray out any water or soap.


Did you do this work yourself?\015\012What parts were replaced in the unit?\015\012Sounds like the connection to the pump has come loose. ... Bissell 1425 Little Green ProHeat Handheld Steam Vacuum

The tool attachment for the hose on my Bissell ProHeat 2X CleanShot won't spray soap or water. The bristles on the tool rotate without a problem and the suction is working fine, it just won't spray water when I pull the little gray trigger on the tool.


Hi,Here is a tip that will give you all the information you need to fix your Bissell Proheat Vacuum Problem. ... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum

I have a bissell 1698 powersteamer. i have already cleaned heater and completely cleaned all parts , checked the mix piston, checked belt. it will not shoot water or mix. the motor runs, it will **** water and the brush turns. is it the pump and does the pump just shoot the soap?


Pump is probably bad. When you put the lid back down, did you put the piston on the bottom of the smart mix knob? Also the smart mix knob should be in the water only selection when the top is pushed all of the way down. Also sometimes the flow ind ... Vacuums

Sprays soap, but not water


The heater can get clogged. Take the silver metal plate off (seven screws) and clean it out. If it is plugged, water will not spray out the bottom. ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

My Bissell shampoo machine will not spray either water or soap


Hi,Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.Bissell Proheat Upright Wet/ ... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum

Not spraying out soap or water


I'm not sure the issue, but try looking in the manual and see if that helps: http://www.bissell.com/assets/0/132/134/228/c6 ... Bissell Lift-Off Pet Deep Cleaner

Bissell 7901-1 The soap doesn't mix with the water when I pull the trigger, I can see the soap isn't being used when I do the carpets. What can I do, have no problem taking this machine apart.


If the mix valve knob is turning smoothly, then most likely the cap and valve for the sop bottle is bad. Also make sure that the seal is on the cap at the bottom of the bottle and not sitting in the hole. ... Bissell 7901-1 ProHeat Scotchgard Upright Wet/Dry Vacuum

I have a bissell powersteamer model #1697-W it will spray out soap but it will not spray water can you please help me thank you


... Bissell 1697W Powersteamer Pro Upright Vacuum

I have a new Hoover Dual V steam vac that I bought from a neighbor who only used it once. I have only used it once since then and it worked great. This time, because I am pregnant, I bought some non-toxic cleaner that was much thicker than the very watery Hoover soap. This vac has a wash option and a rinse option. The rinse option works (sprays and sucks properly), but the wash cycle doesn't at all-neither soap nor water comes out. Nothing comes out, but it still sucks. I took everything o


There's a powerful electric motor attached to a fan that sucks in air.Did you checked and cleaned that motor.If the dirt is got stuck up ion the motor then the motor will not spin as per its regular speed.For rinsing the motor spin on one cycl ... Vacuums

Originally worked fine, but after storing it for about 8 months-a year, it still powers on and sucks but it will not squirt the water and soap to wet it, or even spray just the water to rinse. Help!!! I'm sure there has to be some filters or something that is plugged up and needs cleaned or replaced.


Hi,First, check to see that you put the water in the bladder rather than in the clear tank. Second, did you fill the solution bottle? The Bissell shampooer will not spray water if either of these is empty.Also, if the seal on ... Bissell 9200 Upright Vacuum

I have a Bissell Proheat 2X Carpet/Upholstery cleaner and I can't get the soap and water to come out of the attatchment. The vacuum part is working, but the spray isn't. I can see the fluid is trying to go up the tube but won't spray. Help. Peggy


Hello, I have a Bissell "Little Green" cleaning machine that acted like yours. I found several clogs in the fluid system. The power for the fluid in my unit is provided by a small AC motor independent from the vacuum motor attached t ... Vacuums

I have 1699-R Proheat carpet cleaner recently I was replacing the food pedal during the process some tubings that carry water/chemical got mixed to the point that one side instead of spraying chemical sprays only water from oneside the other side that is connected to the flow indicator cap is completely dry does not move at all. I am looking on line to see tubing diagram for model 1699-R


The instructions in this Repair Guide pertain to the Bissell PowerSteamer ProHeat (#1698)\015\012and the Bissell ProHeat ClearView(#1699). \015\012If your unit matches this model numbers then the repair guide plus diagrams for this unit is mentioned ... Vacuums

The attachment to clean furniture will not spray out water this is the first time we have used this just out of box. Also the detergent will not mix with the water


If you can see the cleaning fluid at the nozzel yet the it does not spray than the nozzles are clogged with dried soap. You can soak the the sprayer in a small bucket over night with a cleaning solution like CLR also used to break up hard water stain ... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

I have the Bissell heat pro 2x 8920 and the water doesn't come out. The soap just mixes with water tank and the carpet stays dry


Check to ensure there is liquid in the water tank and the formula bottle.\015\012\015\012Note: This machine will spray with liquid in the Water tank only if the machine is set to the Water Rinse setting. On any other setting, you need to ... Bissell 8920 ProHeat 2XTM Upright Vacuum

Water & soap spray constantly even when trigger is not depressed.


This may be related. Mined wouldn't spray after it sat for awhile. I tore it down, tapped on the solenoids and reassembled. That worked.Its possible the solenoids may be stuck in the open position although not as probable as stuck in the ... Hoover F7425-900 SteamVac V2 Widepath Upright Vacuum

My Steam Vac won't release any soap water mix


\015\012My model number Bissell is different than yours, but many models work similarly.\015\012 \015\012Capt. Obvious fixes: Water flow often stops unless b ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

My Bissell proheat is spraying the water but there is no cleaner mixed with it, how do i fix this???


Hi,Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.Bissell Proheat Upright Wet/ ... Bissell 8910 ProHeat Clear View Upright Vacuum

Will not spray water or soap - Bissell 1699 ProHeat Clear View Upright Steam Vacuum


See if your tank is seating properly. I bet it's sitting up a bit. Is there water in the little well where it sets? ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

Flow indicator is not turning and the water from the bladder does not spray out only the smart mix container emties


... Bissell 7950 ProHeat Upright Wet/Dry Vacuum

The water and soap dispenser spray continuously, even after releasing the trigger. How can I repair that?


This is a sticky trigger mechanism. You should simply disassemble, clean and re-assemble.\015\012\015\012Thanks for using FixYA!!\015\012 ... Hoover Steam Vac Dual V w/ SpinScrub Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0494 seconds