Having problems with your Bissell 1699 ProHeat Clear View Upright Steam Vacuum ?

Bissel powersteamer clearview will not spray water

\015 Chaged broken belt worked through one bucket of water changed water now will not spray water belts are still intack. tried priming, cant find anything clogged any suggestion\015

Answers :

Did the gasket on the bottom of the water tank come off and is either missing or sitting in the hole where the tank sits? It needs to be on the tank.
\015\012
\015\012
Does water squirt out of the hose nozzle, if it does, then check the heater inside the handle asm. Make sure that where the tubes hook up to it are not clogged. If water doesn't squirt, check for the seal at the bottom of the tank, it needs to be on the tank, not in the hole, this is for the soap bottle also, there is a seal on the bottom of it as well. The flow indictor cap is leaking air or maybe is too tight. If you had the top cover off, make sure that the tubes are routed right so as not to get pinched when the cover is put back on, the smart mix knob should be in the water setting and that the piston is on the bottom of the smart mix knob. Pump is bad. Try running a mix of vinegar and water to see if that unclogs the lines. Is the top cover and the base tight together in the back, sometimes the top breaks loose and it will raise up and it can't spray, just re-fasten it down.
Yes I had the same problem,you have to make sure the soap container has soap or I just use a mixture of soap and water if you want to call me I have more details 630-768-8981
Repair Help & Product Troubleshooting for Bissell 1699 ProHeat Clear View Upright Steam Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Bissel powersteamer clearview will not spray water


Did the gasket on the bottom of the water tank come off and is either missing or sitting in the hole where the tank sits? It needs to be on the tank. \015\012\015\012Does water squirt out of the hose nozzle, if it does, then check ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

Bissell powersteamer clearview won't spray water or suck it up


... Bissell ProHeat Turbo Deep Cleaner Upright Steam Vacuum

I have a Bissell powersteamer powerbrush that sprays for only a few seconds then stops. If I wait 20 seconds or so it will spray again for another 1 or 2 seconds. I have only used Bissell cleaning products in it and clean it every time after use. The hot water tank and cleaner tank are full.


... Bissell Vacuums

My Bissell Proheat Clearview is not spraying water nor taking


Hi,Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.Bissell Proheat Upright Wet/ ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

My bissell 1694e wont spray water - Bissell 1697-7 Powersteamer Pro Deluxe Vacuum


... Bissell 1697-7 Powersteamer Pro Deluxe Vacuum

My bissell powersteamer model 1695 does not spray enough water out. Hardly anything will come out of the handheld attachment either, just a few drips. With the floor unit, it appears the only water coming out is a result of gravity when the control is squeezed. Nothing appears to be plugged up with debrie or deposits. There does not appear to be any kind of drive belt for the pump as it seems to operate off the main vacuum motor. Any ideas?


Hi, my name is John I will do my best to assist you.\015\012\015\012Referring to this ... Bissell 1695 PowerSteamer Vacuum

Bissell powerbrush stop spraying water. - Bissell 1697-7 Powersteamer Pro Deluxe Vacuum


... Bissell 1697-7 Powersteamer Pro Deluxe Vacuum

I have a powersteamer and it does not spray water when I squeeze the trigger. The clean water tank is full, the cleaning solution is full and this is the same problem I had with my last Bissell steam cleaner, which I assumed was just that I had it for a few years, but this cleaner is only over a year old.


Every line has an O Ring at each end. inspect each one by removing the O Ring for nicks and cracks. Lubricate the with Vaseline and reinstall if ok so they will hold the prime to pump and vacuum up Your leaking O rings will draw air causing your p ... Bissell Vacuums

Machine will not pump out water. Brushes work, motor works, new belt, Just will not put out any water??? It is a Bissell Powersteamer,Clearview 4 row brush , dirtlifter.


IF you take the tank out of the base you will see a recepticle where the tank nipple fits into the base. There is a cross looking pattern in the recepticle. Take a pointy object and press down inside the cross area between the bars in the little pie ... Vacuums

I have a bissell powersteamer model #1697-W it will spray out soap but it will not spray water can you please help me thank you


... Bissell 1697W Powersteamer Pro Upright Vacuum

I have a bissell powersteamer model 1697 that does spray water any more. Will a new water pump solve my problem?


Check all lines from being gloggged /also check screen in the water tank on hose can you here the pump working ... Bissell Vacuums

My Bissell 25A3 ProHeat wont spray water - Bissell 1698 PowerSteamer ProHeat Upright Wet/Dry Vacuum


I had two problems. No water was coming out of the main unit (it was working fine via the powerbrush) and the flow indicator wasn't spinning. Because I'm out of warranty, I did two things (after trying all the options that were posted).\015\012 ... Bissell 1698 PowerSteamer ProHeat Upright Wet/Dry Vacuum

My bissell powersteamer clearview will not **** up water


Check the heater inside of the handle, it may be clogged and not allowing water to flow. The hose doesn't use the heater and that would be why it flows out the hose. ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

Bissell Powersteamer It will spray out water and solution but it will not **** it back up. Any suggestions?


Hi,\015\012\015\012theres a small red filter in the head of the machine that gets clogged with hair and the machine wont draw as good, you have to find that and keep it cleaned out. FYI also-if you have pets you have to stop every few ro ... Bissell 1698 PowerSteamer ProHeat Upright Wet/Dry Vacuum

Solution will not spray only water. - Bissell 1697-7 Powersteamer Pro Deluxe Vacuum


Go to bisssell.com ... Bissell 1697-7 Powersteamer Pro Deluxe Vacuum

Air in the pipes will not spray water - Bissell Powersteamer 1694 Upright Vacuum


... Bissell Powersteamer 1694 Upright Vacuum

Will not spray water - Bissell PowerSteamer Deep Cleaner Plum Upright Vacuum


When this happens you usually have a blockage in the tubing. Old cleaning solution gets dried up and hardens and then blocks the tubes. You need to take the tubing off and clean it all out or untill you find the blockage. Once you get it spraying agi ... Bissell PowerSteamer Deep Cleaner Plum Upright Vacuum

Water won't spray from my bissell powersteamer pro - what could be causing it?


... Bissell 1697-7 Powersteamer Pro Deluxe Vacuum

My bissell powersteamer model # 1697 will not spray water. What could be wrong?


... Bissell 1697W Powersteamer Pro Upright Vacuum

Bissell Powersteamer pro will not spray water


... Bissell 8910 ProHeat Clear View Upright Vacuum

Bissell ClearView powersteamer carpet cleaner does not seem to be dispensing water in the pre-treat mode


Pretreating (optional)\015\012Note: Pretreating is recommended to improve\015\012cleaning effectiveness for heavily soiled carpet in\015\012high traffic areas such as entryways and hallways.\015\012A. Spray the BISSELL ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

I have a bissell powersteamer pro delux model 8804, It will turn on, and spray, but will not **** the water back up.


... Bissell 1697-7 Powersteamer Pro Deluxe Vacuum

My bissell powersteamer turbo will not spray water out of the floor sprayer no out of the handheld tools, what do i need to do to fix it?


... Bissell Carpet Cleaner Powerbrush Deep Cleaner Vacuum

Will not spray water - Bissell 1697-7 Powersteamer Pro Deluxe Vacuum


That means that you need to replace the pump belt. Her is the belt you need and the manual:Bissell 1697 Proheat Belt and Manual ... Bissell 1697-7 Powersteamer Pro Deluxe Vacuum

I just purchase a bissell 1697 powersteamer,the water will not spray on carpet.


Take it back. ... Bissell 1697-7 Powersteamer Pro Deluxe Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0469 seconds