Having problems with your Bissell 1699 ProHeat Clear View Upright Steam Vacuum ?

How to change belt on bissell proheat powersteamer

\015 The water supply stopped while shampooing. I removed the cover to access the belt and the belt was broken. I bought a new belt at a vacuum shop, but can't figure out how to put it on the roller.\015

Answers :

There is a video on the Bissell website on how to do this, click here for the link:

Video
I spent about 30 minutes trying to figure this out, and another 15 minutes putting the top face plate back on before I realized how to actually fix this, but the fix in itself is easy once you know what to do. Once you remove the face plate that hides the belt and water pump assembly you should see a red plastic cradle that is what needs to be removed, flip the vacuum up so you can see the brushes you should see that same red piece look closely hidden is a screw that holds that piece in place remove it and now you can move a black swiveling cover that hides the brush belt as well as the water pump belt. It should be pretty straight forward from here, you will have to take the brush belt off to put the water pump belt on, after both belts are on swivel the black cover back in place, replace the red plastic cradle piece and the belt face plate cover and your good to go. Good Luck

-XxSiRiuSxBuRnxX

Greg
Repair Help & Product Troubleshooting for Bissell 1699 ProHeat Clear View Upright Steam Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

How to change belt on bissell proheat powersteamer


There is a video on the Bissell website on how to do this, click here for the link: ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

Belt removal Bissel PowerSteam ProHeat


First take off the cover on the left side oif the top cover, then turn it over, remove the screw holding the red lock and pull the cap and brush roll out, remove the cap, remove the cogged belt, then you can put the new pump belt thru that slot, put ... Bissell 1698 PowerSteamer ProHeat Upright Wet/Dry Vacuum

Changing the belt on a bissell proheat 9200 - Bissell 7920 ProHeat Pro-Tech Upright Wet/Dry Vacuum


Hi,\012\012Here is a tip that will give you all the information you need to fix your Bissell Proheat Vacuum Problem.\012\012 ... Bissell 7920 ProHeat Pro-Tech Upright Wet/Dry Vacuum

How do I change the belt on the Bissell Proheat


Hi,Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.Bissell Proheat Upright Wet/ ... Bissell 7920 ProHeat Pro-Tech Upright Wet/Dry Vacuum

How to change a belt on a bissell pro heat - Bissell 1699 ProHeat Clear View Upright Steam Vacuum


Hi,Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.Bissell Proheat Upright Wet/ ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

Change belt on Bissell 7901-z - Bissell 7901-1 ProHeat Scotchgard Upright Wet/Dry Vacuum


Hi,Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.Bissell Proheat Upright Wet/ ... Bissell 7901-1 ProHeat Scotchgard Upright Wet/Dry Vacuum

I have a broken pump belt on my bissell powersteamer proheat. The belt was just laying in there. I have a new one but no where in the manual does it tell you how to replace it and where! Help


Hi,Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.Bissell Proheat Upright Wet/ ... Bissell 1698-1 PowerSteamer ProHeat Plus Upright Vacuum

I have a Bissell proheat 2x microban carpet cleaner. no water is dispensing . I have tried double cleaning everything, changing soulation(bissell steam clening) checking the filters checking for hot water, the brushes turn (belt?) What should I do?,


... Bissell Vacuums

How to change pump belt on bissell pro heat - Bissell 7920 ProHeat Pro-Tech Upright Wet/Dry Vacuum


First take off the cover on the left side oif the top cover, then turn it over, remove the screw holding the red lock and pull the cap and brush roll out, remove the cap, remove the cogged belt, then you can put the new pump belt thru that slot, put ... Bissell 7920 ProHeat Pro-Tech Upright Wet/Dry Vacuum

Change belt on proheat bissell 8910


I have added a link for the owners manual for your model and a link for the replacement belts you need.8910 User Guide (PDF) ... Bissell 1697-7 Powersteamer Pro Deluxe Vacuum

I own a Bissell Proheat 12 amp carper cleaning machine and I cannot figure out how to change the belt?


... Vacuums

How do i change the belt on the bissell powersteamer 1697w????


Ok taking the cover off is good. I believe the the little red thing is the beater bar. This beater bar has brushes on it an extends the width of the vacum. Pull the beater bar out straight. Some times it is tight. Next is to place the new belt around ... Bissell 6594 PowerForce Bagless Upright Vacuum

Change belts - Bissell 1699 ProHeat Clear View Upright Steam Vacuum


Here are the belts you need. They come with printed instructions:Bissell 1699 Belts ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

How do you change the belt - Bissell ProHeat Turbo Deep Cleaner Upright Steam Vacuum


Hi there SmartAlec from NelsonVacuums.com.au here. Bissell have a very good guide on their website bissell.com.au here is a link to the product i think you have ... Bissell ProHeat Turbo Deep Cleaner Upright Steam Vacuum

I have a Bissell proheat powersteamer but it will not spray the belts are not broken what can I do?


Hi,Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.Bissell Proheat Upright Wet/ ... Bissell 7920 ProHeat Pro-Tech Upright Wet/Dry Vacuum

Nothing spraying out of Bissell Powersteamer Proheat. I've check filter under flow indicator, pump belt is fine, cleaner in proper tank, bladder of water tank is full. We've had it for a very long time but it's barely been used. Can anyone help?


... Bissell 1698-1 PowerSteamer ProHeat Plus Upright Vacuum

How do I change the belt for the brissel? - Bissell 7901-1 ProHeat Scotchgard Upright Wet/Dry Vacuum


Here is a link to the belt you need and the manual you can view:Bissell 7901 Belt and Manual ... Bissell 7901-1 ProHeat Scotchgard Upright Wet/Dry Vacuum

Product instructions need full view of internal schmatic and instructions on how to change belts or troubleshoot problems. I have the 1699 proheat and the 7901 Bissell I would appreciate a copy of operating instructions. Thank you, Raja Burns email address [email protected]


You can change the belts from the bottom, remove the brush roll, then you can reach thru slot to change the pump belt, then the cogged belt. Wasn't sure which darwing you wanted, if it is electrical, let me know.\015\012\015\012 ... Bissell 7901-1 ProHeat Scotchgard Upright Wet/Dry Vacuum

How do you change the belt for the brushes - Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum


Turn the vacuum upside down, there should be two thumb release pivot screws. Remove bottom cover, now you have access to the belt. Remove belt that's in figure eight position, then reinstall same as above with figure eight position. ... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum

How do u change the brush belt - Bissell ProHeat Turbo Deep Cleaner Upright Steam Vacuum


Here is a link to the belts you need and a manual you can\015\012view which has instructions:Bissell Carpet Cleaner Belt and Manual ... Bissell ProHeat Turbo Deep Cleaner Upright Steam Vacuum

I HAVE A BISSELL PROHEAT CARPET CLEANER, AND IT DONT SEEM TO CLEAN AS GOOD ANY MORE, PLUS I HAVE NOTTICED NOT SUCKING THE WATER BACK AS GOOD. DOES IT MEAN I HAVE TO CHANGE THE BELTS ??.


Hi,Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.Bissell Proheat Upright Wet/ ... Bissell Carpet Cleaner Powerbrush Deep Cleaner Vacuum

The belt p/n 0100623 broke - need instructions on how to replace it - we have Bissell ProHeat Powersteamer


I just replaced mine last night. 1) take off the top belt cover. 2) take the water and cleaning solution tanks out then lay the unit on the side so the bottom of the cleaner is facing you (water and solution may leak out so you might want to do this ... Bissell Vacuums

How do you change to belt on the Bissell Proheat Clearview?


Hi,Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.Bissell Proheat Upright Wet/ ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

How do change the belt on the bissell proheat carpet shampooer


... Bissell Vacuums

How do I change the Brush Belt? - Bissell ProHeat Turbo Deep Cleaner Upright Steam Vacuum


It depends on the type of ProHeat cleaner you have. But you can go to www.bissell.com and download the manual for your model and you can get the belt you need at ... Bissell ProHeat Turbo Deep Cleaner Upright Steam Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0770 seconds