Having problems with your Bissell 1699 ProHeat Clear View Upright Steam Vacuum ?

How to check the location of the pump belt? - Bissell 1699 ProHeat Clear View Upright Steam Vacuum


Answers :

Take off belt cover on the left side of the top cover, turn cleaner over, take out screw from red lock and remove, pull cap and brush roll out, unhook the cogged belt, then you can replace the pump belt thru that opening. Put belt over the pump pulley and stretched to go over the motor shaft. Then check the cogged belt and the cogged end of the pully to make sure that there are cogs, replace belt if there are cogss missing or belt is broke, if no cogs on the pulley, then you will have to replace the pump. Pulley only comes witht he pump.
523f813.jpg
Repair Help & Product Troubleshooting for Bissell 1699 ProHeat Clear View Upright Steam Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

How to check the location of the pump belt? - Bissell 1699 ProHeat Clear View Upright Steam Vacuum


Take off belt cover on the left side of the top cover, turn cleaner over, take out screw from red lock and remove, pull cap and brush roll out, unhook the cogged belt, then you can replace the pump belt thru that opening. Put belt over the pump pull ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

What size belt for a bissel proheat - Bissell 1699 ProHeat Clear View Upright Steam Vacuum


... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

Broken belt how to fix i have a belt - Bissell 1699 ProHeat Clear View Upright Steam Vacuum


Take off belt cover on the left side of the top cover, turn cleaner over, take out screw from red lock and remove, pull cap and brush roll out, unhook the cogged belt, then you can replace the pump belt thru that opening. Put belt over the pump pull ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

How to change a belt on a bissell pro heat - Bissell 1699 ProHeat Clear View Upright Steam Vacuum


Hi,Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.Bissell Proheat Upright Wet/ ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

How do you change the belt! - Bissell 1699 ProHeat Clear View Upright Steam Vacuum


It is not possible to post all the directions and pictures here, but you can download the manual which provides all the instructions:\015\012\015\012 ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

Bisell carpet cleaner lost pump prime - Bissell 1699 ProHeat Clear View Upright Steam Vacuum


Hi Jay! Sorry to hear your machine has lost prime. Here's a quick link to troubleshooting steps to assist you:\015\012http://www.bissell.com/FAQDetail. ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

Change belts - Bissell 1699 ProHeat Clear View Upright Steam Vacuum


Here are the belts you need. They come with printed instructions:Bissell 1699 Belts ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

Bissell steam cleaner water leaking - Bissell 1699 ProHeat Clear View Upright Steam Vacuum


... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

How do i operate the steam cleaner machine - Bissell 1699 ProHeat Clear View Upright Steam Vacuum


Here is a link to the user guidehttp://www.dirtdevil.com/search.aspx?type=3 ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

Bissell Proheat user manual - Bissell 1699 ProHeat Clear View Upright Steam Vacuum


Hi,Here is a tip that will give you all the information you need to fix your Bissell Proheat Vacuum Problem.B ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

Bissell proheat not dispensing water - Bissell 1699 ProHeat Clear View Upright Steam Vacuum


Hi,As the weather is getting warmer for many people their freezer and/or refrigerator do not work right because of a dirty condenser coil...there are also many other things that can go wrong. If you are hearing a clicking or buzzing ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

Loss of suction on a bissell proheat pet - Bissell 1699 ProHeat Clear View Upright Steam Vacuum


... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

1699 ProHeat Clear View Upright Steam Vacuum


Http://geeksquad.fixya.com/ThreadView.aspx?prdid=49925&thid=639852\015\0121699 ProHeat Clear View Upright Steam Vacuum\015\012Posted by wmwmsjr on Jun 02, 2008\015\012 ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

Brush won't rotate so machine will not clean - Bissell 1699 ProHeat Clear View Upright Steam Vacuum


Your belt is probably stretched or broken. You can get this belt here:http://vacbelts.xps.convina.com/bissell-proheat-belt-combo-pack. ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

Will not spray water or soap - Bissell 1699 ProHeat Clear View Upright Steam Vacuum


See if your tank is seating properly. I bet it's sitting up a bit. Is there water in the little well where it sets? ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

Water does not dispense - Bissell 1699 ProHeat Clear View Upright Steam Vacuum


That means that you need to replace the pump belt. Here are the belts you need:Bissell Proheat Belts ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

Scrub roller wont spin - Bissell 1699 ProHeat Clear View Upright Steam Vacuum


Pull the bottom cover off and replace the drive belt for the brush drum, if the belt is ok then replace the drive motor for the brushes. ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

Prime a bissell steam vac - Bissell 8910 ProHeat Clear View Upright Vacuum


Hi,Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.Bissell Proheat Upright Wet/ ... Bissell 8910 ProHeat Clear View Upright Vacuum

My bissell want **** up the water - Bissell 1699 ProHeat Clear View Upright Steam Vacuum


Make sure that where the tank lid lip and the top of the clear noozle has that black oblong gasket on it. Also make sure the filter on the tank lid is clean. ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

Lost manual dont know were water goes - Bissell 1699 ProHeat Clear View Upright Steam Vacuum


Here you gohttp://www.bissell.com/images/UserGuides/7901_1008.pdf ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

How do I know the rinse feature is working? - Bissell 1699 ProHeat Clear View Upright Steam Vacuum


You won't see any saop suds being sucked up, just clear water. ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

How do I work this dam thing????? - Bissell 1699 ProHeat Clear View Upright Steam Vacuum


How do I work this?\015\012Bissell 1699 ProHeat Clear View Upright Steamer\015\012How do I work this dam thing?????\015\012 \015\012I would advise you to ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

Replace belt - Bissell 8910 ProHeat Clear View Upright Vacuum


You can get this replacement belt at www.vacbelts.com. ... Bissell 8910 ProHeat Clear View Upright Vacuum

How do I replace the power brush belt? - Bissell 8910 ProHeat Clear View Upright Vacuum


This machine needs to be taken to a dealer to replace the belt. It is hooked into the pulley and pump assembly and is a nightmare to fix. ... Bissell 8910 ProHeat Clear View Upright Vacuum

The solution comes out but not water. - Bissell 1699 ProHeat Clear View Upright Steam Vacuum


Did you mix the solution with water thats how they work it,take one cap full they gave you a messuring cup when you got the unit.I hope the solution goes in the same bag so retry the mixing and you should get water and soap ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1362 seconds