Having problems with your Bissell 25A3 Upright Vacuum ?

My bissel pro heat has no suction

\015 When i go to use my bissel everything works but has no suction power\015

Answers :

Repair Help & Product Troubleshooting for Bissell 25A3 Upright Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Either of my bissell porheat turbo 2x or my bissell pro heat don't have suction i would like to try and trouble shoot if i could due to the fact i am having difficulty finding a small machine repair center in my area could you possible help me or send a link which could help me find solution these machines are not more then a year and a half old if that thanks for your time and help warmest regards rebekah majors


Hi,Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.Bissell Proheat Upright Wet/ ... Bissell ProHeat Turbo Deep Cleaner Upright Steam Vacuum

I have a Bissell Pro 2x carpet cleaner. The water heats properly as well as spraying the cleaning product. However, when I go to suction the water from the carpets, the 2 in 1 water tank bladder works properly but there is no dirty water outside the bladder. I have only used this carpet cleaner ~ 5 times and in the beginning I had to empty the suctioned water quite frequently as it was dirty and it could not not hold any more water. So I have done 1 room and all the dirt remains in the carpet


Check that the suction cone is not blocked. Check that the filter or hose to the bladder isn't blocked as well. ... Vacuums

Bissell pro heat 25A3 won't suction up water


... Bissell Pro Heat Deep Cleaner Model 25A3, 1 ea

My bissel pro heat has no suction


... Bissell 25A3 Upright Vacuum

Bissel pro heat 2 carpet cleaner will not suction water and brushes won't engage


... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum

ON my Bissell 2x pro heat carpet cleaner the little red door will not close because the little red slide will not push it upward therby not allowing proper suction. What has always happened in the past that made the little red slide push the door close?


... Vacuums

Bissel pro heat cleaner won't expell water -- seems no suction


The reason that it won't expel water is because your pump belt is stretched and worn. You need to replace that belt, it is pretty easy. Here is the belt you need: ... Bissell ProHeat Turbo Deep Cleaner Upright Steam Vacuum

My bissell pro heat 2X has stopped dispensing water from the tank, the suction is working and it seems to be dispensing the detergent, so it is not rinsing or washing with water. I have cheaked to see if there is a blockage but that doesn't seem to be the problem...please help


I have a Proheat 2X and had the same problem. I tried the Water Rinse setting and found water came out and was suctioned properly, but on the Light Clean, Normal Clean, and Heavy Traffic settings, the unit failed to do anything. Problem may be with l ... Vacuums

Bissell powerwash pro heat loss of suction


... Bissell Carpet Cleaner Powerbrush Deep Cleaner Vacuum

Truction for bissell pro heat turbo 2x - Bissell 7920 ProHeat Pro-Tech Upright Wet/Dry Vacuum


... Bissell 7920 ProHeat Pro-Tech Upright Wet/Dry Vacuum

Bissell pro heat not spraying water - Bissell 7920 ProHeat Pro-Tech Upright Wet/Dry Vacuum


Hi,Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.Bissell Proheat Upright Wet/ ... Bissell 7920 ProHeat Pro-Tech Upright Wet/Dry Vacuum

How to change pump belt on bissell pro heat - Bissell 7920 ProHeat Pro-Tech Upright Wet/Dry Vacuum


First take off the cover on the left side oif the top cover, then turn it over, remove the screw holding the red lock and pull the cap and brush roll out, remove the cap, remove the cogged belt, then you can put the new pump belt thru that slot, put ... Bissell 7920 ProHeat Pro-Tech Upright Wet/Dry Vacuum

Bissel Pro Heat Turbo attachment does not work.


Something is probably clogging up the suction.Try to snake it out with a coat hanger or similar tool.Often, especially with shedding pets hair will clog the suction pipes\015\012Hope this is helpful.\015\012\015\012Good ... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum

Bissell Pro Heat 8910 clogged?


Why the motor sounds muffled I am not sure. When the water is sucked up, it goes directly into the tank. The motor only creates the suction so it can do that. There should be a filter on the rim of the recovery tank lid, is it clean? Other then p ... Bissell 8910 ProHeat Clear View Upright Vacuum

Little green pro heat 1725-Q wont spray no suction


... Bissell 1725-1 Little Green ProHeat Wet/Dry Vacuum

Bissell pro heat


You have something stuck in the hose or you have a filter that you haven't yet cleaned . You will need to remove the hose at it's mount and strech it out , if alls well there, then look for a small foam filter hiding on the machine going to the motor ... Bissell 8910 ProHeat Clear View Upright Vacuum

Bissel Pro Heat perfect pass carpet cleaner


... Bissell ProHeat Turbo Deep Cleaner Upright Steam Vacuum

BISSELL PRO HEAT X2 CLEAN SHOT


Try checking the lint filter. It is located in the top clear plastic section (the one with the dial to switch from floor to tool use) and is on the underside. It is a small (1 inch square) red plastic filter with a little door on it. Open the door ... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum

Bissell pro heat


The knob on the left side, have you flipped it over to hose? And did the flap open when you flip it over to hose. The tool is bad, if you can take it apart, clean the brush roll ends and make sure it turns freely. ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

Bissell Pro Heat gives no flow


Check the heater in the handle to make sure it isn't clogged up where the tubes hook to it. When you put the top back on, make sure the tubes are routed correctly so as not get pinched by the cover. The smart mix valve needs to be on the water sett ... Bissell 7901-1 ProHeat Scotchgard Upright Wet/Dry Vacuum

Bissell Pro Tech Pro Steam Cleaner - no suction @ pump


Take a look at the Service Center Repair Manual (courtesy of Bissell New Zealand):http://newzealand.bissell.com/images/IncludeContent/Service_Center_Help/Upright_Deep_Cleaner_Repair_Guide.pdfThere's a (basic) diagnostic routine for ... Vacuums

I have a bissell pro heat water wont come out


The water sprayers on your Bissell are probably clogged. I had this problem this morning, myself, with my machine, about 15 months old. They get clogged up with mineral deposits. This is a *fairly* easy thing to fix yourself. Read all the way to ... Bissell ProHeat Turbo Deep Cleaner Upright Steam Vacuum

I have a bissell pro heat water wont come out


The pump may spin but the vanes inside could be broken or worn enough that they are unable to push water through the pump system. I am repairing a Bissell Model 8920 Pro-Heat 2X that has this very same problem.\015\012\015\012I tested all ... Bissell ProHeat Turbo Deep Cleaner Upright Steam Vacuum

Bissell pro heat steam carpet cleaner, not releasing water.


That means that you need to replace the pump belt. Here is the belt you \012need and a manual you can view:\012\012Bissell 7901 Belt and ... Bissell 7901-1 ProHeat Scotchgard Upright Wet/Dry Vacuum

Replacement electric motor for Bissell Pro Heat 2x Select carpet


Bissell proheat i can spray solution from the handle but it has no suction help ... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0511 seconds