Having problems with your Bissell 3522 PowerForce Bagged Upright Vacuum ?

The bristles will not spin. - Bissell 3522 PowerForce Bagged Upright Vacuum


Answers :

See if the belt (that drives the bristles) if is loose or need replacement.The belts are located either on the left or right side of the bristle brush(you can locate it by putting the vacuum upright and see under the brushes). If it is loose or broken replace it(walmart has replacements for it or any hardware store)just bring the belt for the replacement number written on the belt,or know the brand and model number.
Repair Help & Product Troubleshooting for Bissell 3522 PowerForce Bagged Upright Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

The bristles will not spin. - Bissell 3522 PowerForce Bagged Upright Vacuum


See if the belt (that drives the bristles) if is loose or need replacement.The belts are located either on the left or right side of the bristle brush(you can locate it by putting the vacuum upright and see under the brushes). If i ... Bissell 3522 PowerForce Bagged Upright Vacuum

Brush heads won't spin - Bissell 3522 PowerForce Bagged Upright Vacuum


Your belt is stretched, worn or broken and therefore not turning the brush. Here is a link for the replacement belts you need and the manual which has instructions: ... Bissell 3522 PowerForce Bagged Upright Vacuum

How to change the bag on the bissell 35221 - Bissell 3522 PowerForce Bagged Upright Vacuum


BISSELL User’s Guides can be downloaded at www.bissell.com\012On the front page under Customer Service click on User’s Guides and enter the model number of your unit.\012User Guide will be displayed as a PDF file. ... Bissell 3522 PowerForce Bagged Upright Vacuum

I have a problem with my model 6585-3 bissell upright powerforce bagless turbo with turbo brush vacuum The brush has quit spinning upon removal i noticed that one side of the brush was free to spin the other side that has the rectangular piece to help hold into place seems to be locked up and will not spin is it corroded or have i lost a piece that joins with it that allows it to spin freely belts are good and motor is turning brush will not budge


... Vacuums

No power on a bissell 71y7 when turned on - Bissell 3522 PowerForce Bagged Upright Vacuum


Hey, having no power when you want to vacuum is inconvenient.You may want to try another outlet and look for damage on the power cord. If you are still having problems, you may want a Qualified Technician at one of our Authorized Service Centers ... Bissell 3522 PowerForce Bagged Upright Vacuum

The part under the vacuume isnt spinning - Bissell 6594 PowerForce Bagless Upright Vacuum


... Bissell 6594 PowerForce Bagless Upright Vacuum

Bissel roller not turning - Bissell 3522 PowerForce Bagged Upright Vacuum


Hey, brush not turning can be quite frustrating. Here's a quick link to troubleshooting steps to assist you.\012\012http://www.bissell.co ... Bissell 3522 PowerForce Bagged Upright Vacuum

After installing belt...broke - Bissell 3522 PowerForce Bagged Upright Vacuum


Sounds like the beater brush is frozen and won't turn.\015\012Remove the beater brush and clean off all debris, especially at both ends. You will find a square(?) piece at each end of the beater brush that holds it in place. This need to turn freel ... Bissell 3522 PowerForce Bagged Upright Vacuum

The handle release lever won't stay up - Bissell 3522 PowerForce Bagged Upright Vacuum


... Bissell 3522 PowerForce Bagged Upright Vacuum

Bissell PowerForce Bagged Upright Vacuum, 71Y7W manual


... Bissell PowerForce Bagged Upright Vacuum, 71Y7W

Rotary brush is not spinning - Bissell 6594 PowerForce Bagless Upright Vacuum


That means that you need to replace the belt. Here is the belt you need and the manual:Bissell PowerForce Belt and Manual ... Bissell 6594 PowerForce Bagless Upright Vacuum

I have the bissell power force bagged upright vacuum and the brush is not turning, I have replaced the belt but the brush will not move but the metal piece that is hooked to the motor that spins the belt and brush is turning but the brush won't, and the belt starts to burn


Sounds like your brush roll is seized. Remove the brush roll (see picture) and make both of the end caps spin freely. If not, replace it and you should be set. *An example of a brush roll* ... Bissell 3522 PowerForce Bagged Upright Vacuum

Bissel vacuum will not turn on - Bissell 6594 PowerForce Bagless Upright Vacuum


... Bissell 6594 PowerForce Bagless Upright Vacuum

My old bissell 3510 upright vacuum seems to have no suction into the bag...I replaced a broken belt several days ago, and now the vacuum picks up debris, but seems to just collect it behind a wheel..The bag does not "puff out" like it used to...How can I fix this??


... Bissell 3510 PowerPartner Upright Vacuum

Bissell vacuum making loud noise - Bissell 6594 PowerForce Bagless Upright Vacuum


... Bissell 6594 PowerForce Bagless Upright Vacuum

Bissell Power Track Cyclonic Upright Bagless Vacuum.. ..The spin brush works laying down....when upright it won't spin! I cleaned any and all hair from the roller....belt is not broken....but do I need a new belt though? The vac is a few years old bever replaced the belt yet.


You need a new belt. ... Vacuums

My Bissell vacuum cleaner won't turn on. - Bissell 6594 PowerForce Bagless Upright Vacuum


... Bissell 6594 PowerForce Bagless Upright Vacuum

How to change belt on Bissell 6582 vacuum - Bissell 6594 PowerForce Bagless Upright Vacuum


Here is a link to the belts you need and to a manual you can view with instructions.Bissell PowerForce Belts and ManualHope it helps ... Bissell 6594 PowerForce Bagless Upright Vacuum

Bissell upright, 6585 - Bissell 6594 PowerForce Bagless Upright Vacuum


... Bissell 6594 PowerForce Bagless Upright Vacuum

Bissell Powerf DJ68-00161C Upright Bag Vacuum will not power on. I did rinse out the bag compartment but it should be dry now. I use the Style 7 bag & belt. This is the first time it will not power on.


Hmm, you really should not ever rinse out your vacuum unless you have a model that specifically states it is called for. If you must, then use only a slightly damp sponge or cloth. There are so many ways water can have ruined your motor. Let the whol ... Bissell 3522 PowerForce Bagged Upright Vacuum

No power in vacuum only hose works - Bissell 6594 PowerForce Bagless Upright Vacuum


CHECK FOR A CLOG BEHIND THE BRUSH,OR MAKE SURE YOUR BELT IS NOT BROKEN OR OLD ... Bissell 6594 PowerForce Bagless Upright Vacuum

Recall bissell power force bagless - Bissell 6594 PowerForce Bagless Upright Vacuum


... Bissell 6594 PowerForce Bagless Upright Vacuum

My bissell will not stay on - Bissell 6594 PowerForce Bagless Upright Vacuum


Turning off is probably most likely caused by over heating because the filters are clogged and need to replaced or cleaned.if you are in ... Bissell 6594 PowerForce Bagless Upright Vacuum

How do I change a belt in a 6579 Bissell ? - Bissell 6594 PowerForce Bagless Upright Vacuum


Here is a link to a site where you can view the manual which has instructions on how to change the belt. You can also get the belts you need here:Po ... Bissell 6594 PowerForce Bagless Upright Vacuum

Bissell vacuum roller will not spin - Bissell CleanView II Plus Upright Bagless VacuumVacuum


HI,\015\012Most of the time if the roller will not turn it is because the belt is either strecthed too far and is loose or it is completely broken...\015\012Check and replace the belt before doing anything else.\015\012\015\01 ... Bissell CleanView II Plus Upright Bagless VacuumVacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1293 seconds