Having problems with your Bissell 3576 CleanView II Bagless Upright Vacuum ?

Bissel Vaccum giving a foul odour

\015 HiI own a Bissel Cleanview2 bsgless vaccum. The other day, I removed the filters under the dirt container to clean them and put them back as before. Now the vaccum gives out a dirty stench within the first minute of use. Please help.MK\015

Answers :

Hi - here are a few tips!\015\012
\015\012If the filters are washable they have to be dried completely before putting back into the machine, otherwise you're damaging your vacuum by putting in damp filters which won't do much but put back the stale smell into the home. Generally washing filters should be done with a little washing up liquid, washed out, rinsed, drip dry and dried over 24 hours to room temperature naturally (not on a radiator or heater). \015\012
\015\012Faster drying should employ the use of a low temperature tumble dryer with the filters placed in a pillow case with a towel added to prevent banging off the sides of the electric dryer when in operation. \015\012
\015\012Also, whilst the filters are drying take off the main hose of the Clearview and wash it out with washing powder with the hose laid in the bath. Alternatively put wet wipes or cleaning wet wipes down the hose with a stick to get out all matter of dirt - clearview hoses are the worst for stinking especially if you have pets. That should improve the general way of your vacuum and giving it a more neutral smell. Also when everything is dried out inclduing the hose, sprinkle some bicarbonate of soda around so that the vacuum picks it up and neutralises previous odours that the vacuum had from the beater bar/floor head.
Take the filter out of the dirt cup and remove the foam filter from around the paper filter and wash it good with water in the sink then lay a paper towel down and fold it around the filter and dry it .the paper filter is washable run water over it and take a brush and brush the dirt out of it in up and down strokes then let dry.there should be a hepa filter on the side and clean it also.its water friendly also.reach up inside the upper cup above the the dirt cup and there is another filter just turn and it comes down.clean it also
Repair Help & Product Troubleshooting for Bissell 3576 CleanView II Bagless Upright Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Bissel Vaccum giving a foul odour

Hi - here are a few tips!\015\012\015\012If the filters are washable they have to be dried completely before putting back into the machine, otherwise you're damaging your vacuum by putting in damp filters which won't do much but put back the st ... Bissell 3576 CleanView II Bagless Upright Vacuum

I purchased my Bissel PowerSteamer Clearview a few years or so ago, and cannot find where I filed the manuals. If I find the actual seriel number on the Bissel PowerSteamer Clearview, Is there a way that I can purchase another manual? I really do not have any problem with my Bissel, but being I am 75 years of age and do not use it myself anymore, I want to give it to a daughter of mine (but I would like to have the manuals that go with it to give to her also).

No need my friend. Go here. All documentation is here...and....it's free! Hope this helps : )http://www.bissell.com/user-guides/?searchtext=1699%2520pro%2520heat&searchType=search&mode=228 ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

I misplaced the manual for the Bissell Momentum Cyclonic vaccum. Every website Ive found for links to get the manual only take me to Bissell vaccuming parts for sale,and I do not wish to buy parts, just need the manual.

... Bissell Vacuum - Momentum Cyclonic 1 ea Bagless Upright Vacuum

Vaccum problem I turn the vaccum on and it does not run but the light on the vaccum works. Bissell bagless vaccum cleaner

No sound at all? or the motor runs but no vaccuum?\015\012did it stop while using it? might have overheated due to dirty filters... strange that the light comes on but no motor at all... that would suggest to me that the motor is shot... ... Bissell 6594 PowerForce Bagless Upright Vacuum

Nobody seems to be able to answer the question on how to change the belt on a bissell steam cleaner ..... Bissell is horrible for never giving customers proper instruction manuels .... THUMBS DOWN FOR BISSELL

I have the same prob. this is what i found\015\012\015\012\015\012Since changing the belt is the easiest fix, we suggest you check that first. (Before attempting any repair be sure your machine is unplugged from the electrical ou ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

Need instruction/care booklet for my Bissell powerforce vaccum model #3522-5. Bacfk of vaccum hose is filled with dirt and when attachment is used, dust & dirt fly everywhere. I don't have the care booklet for the vaccum and need to figure out how to fix the problem. Thanks

... Bissell 3522 PowerForce Bagged Upright Vacuum


Please check the following: \015\012 \015\012First check the motor duct gasket. The motor duct gasket is visible once the tank is removed. It is located underneath the handle on the top of the base of the machine. It has a black rubber co ... Bissell 9200 Upright Vacuum

Lost user Manual for Bissel Vaccum 6860-H - Bissell Vacuums

... Bissell Vacuums

When I was using my Bissell ProHeat 7901, I smelled something hot (almost burnt) and turned off the vaccum. When I turned it back on, everything seemed to be working, but the vaccum part was not making the same sound. The bristles are still turning, but it isn't picking up as much and is leaving quite a bit of lint on the carpet. Could the belts be worn? How do I tell? Thanks!

Ya that is probably the issue. Here is a link to the belts you need and to the manual which has instructions:Bissell ProHeat Belts and M ... Bissell 7901-1 ProHeat Scotchgard Upright Wet/Dry Vacuum

My Bissel Vaccum cleaner is making strange noise!!

Call the 1-800 number on the back ... Vacuums

Bissell vaccum problem

Hi mandilyn,\015\012\015\012underneath your vaccum there is a brush that rotates round maybe stuck with bit`s of carpet turned round your brush just remove it by cutting with something sharp that should free your brush and your vaccum sho ... Bissell 3594 CleanView PowerTrak Bagless Upright Vacuum

My bissell bagless vac has no vaccum. ihave

Have you checked the main dust channels from the hose leading into the bin? Have you brushed clean the main filter cones? Make sure all the filters have been properly cleaned *(and if washed make sure its completely dry before puttng back into the ma ... Vacuums

Bissell vaccum cleaner just turned off why

Ive had this problem before. I have never figured out what caused it. I let it be for a few minutes and it started working again.. weird.. I'd just let it sit for a few then try it again. ... Bissell 6594 PowerForce Bagless Upright Vacuum

Bissel upright vaccum model 6594

Try pushing brromstick or long pieceof conduit thru hose youmight think you have everything out of the hose ... Bissell 9200 Upright Vacuum

Roller wont turn on my bissell vaccum model 5770

... Bissell Upright Vacuum - The Pet Hair Eraser 1 ea Vacuum

Bissel bagless vaccum cleaner---how to reassemble

Make and model number please ... Vacuums

Our Bissell vaccum turns on and sounds normal but it is not sucking anything up the hose.

Check and clean all filters or look for any obstruction in the hose. ... Bissell Vacuums

Have a Bissell proheat steamer. Will not heat up. Is there a reset for for heat switch. I beleive just needs reset. The switch, the way that it feels gives me this indication. Switch will not engage and stay switched to on position. J.J.

Hi,Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.Bissell Proheat Upright Wet/ ... Bissell ProHeat Deep Cleaner Upright Vacuum

Bissell powerforce My lower pickup tube became clogged so I removed it and cleaned it out and reinstalled it.Now everything runs good but the vaccum want pick up any dirt .I replaced the bag andf when I turn it on it just exhaust air but does not have any suction,I tired tp pull the bag door of while it was running whick I could not do so it has plenty of suction inside just not getting any outside can you help?

... Bissell Vacuums


You have to stop leaving the cleaning solution the tank after you're done...unfortunately you may be outaluck...try putting a tiny amount of ammonia in the tank and keep pulling the solution "trigger"...maybe you'll get lucky...otherwise trash the va ... Bissell Lift-Off(R) Revolution(R) Turbo Upright Vacuum

Can i get a manual for my bissell healthy home vaccum model#5770 my belt broke and i can't find my manual to replace the belt

Yes, goto cnet.com and search for manual and download the pdf file ... Bissell 5770 Healthy Home Bagless Upright Cyclonic Vacuum

My bissel upright vaccum cleaner belt got damaged and i replaced it with a new one , but it got damaged immd after replacing

In the area where you replace the belt, see if you can remove the beater bar, and check that there is nothing stuck in the area that is causing the damage, like a small screw or similar item. ... Bissell 6594 PowerForce Bagless Upright Vacuum

Dear tech, I have a 12amp bissel bagless cleaner model# 4220-P the part i need is under the foot lever to lower the vaccum cleaner to sweep. The part is the slide pin that locks the sweeper from lowering.It has a spring attach to it. can I buy this part bob Yurkovich

Http://geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=805734\015\012Generic problem for all Vacuums\015\012Dear tech, I have a\015\012Posted by yurk on Jul 1 ... Vacuums

Bissell 5770p vaccum cleaner stopped working. It just does not turn on when power button is pushed on

... Bissell 5770 Healthy Home Bagless Upright Cyclonic Vacuum

Water Leakage We have a Bissell Proheat (Pro Tech). I don't think it is the 2X model. When releasing the water with the knob on the handle, water comes out the side of the housing at the lower part of the unit. Is their a seal that my be worn out or broken. Can you give us some ideas before we take it to an expensive repair man to fix

Check the water bottle. Ours has been doing the same but putting a bit of j cloth between what they call the o ring and the cap fixed it. Really you need a new bottle assembly ... Bissell 7920 ProHeat Pro-Tech Upright Wet/Dry Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0588 seconds