Having problems with your Bissell 3750 Lift Off Bagless Upright Vacuum ?

Bissell 3750-t part

\015 I am looking for the plug and socket that mate when the lift out unit is placed back in the base unit. It is located at the bottom of the lift out part and the top rear of the base unit. They are a molded 2pin P&S that have short pig tails with plugs on the end of them. Thank you for any help, Bob\015

Answers :

WOW just spoke with bissell, and they are sending me out a refurbished 3750-r. This thing has been sitting in my basement for over 5 months, who would have known.... Thanks Guys
Same issue, called them up and they are sending a refurb back to me.
Repair Help & Product Troubleshooting for Bissell 3750 Lift Off Bagless Upright Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Mystery part Bissell 1699-P. I removed the top cover and a part came tumbling out (from the rear of the machine - towards the handle area). I have no idea were this part belongs. I have a schematic of the cleaner but I can not locate the part on it. I tried to copy and paste a picture of the part but that isn't working so I will attempt to discribe the part: There is nothing stampted on the part that I can see. It is plastic(white), 2" long, 3/16" in diamater. One end is U shaped (u-shape is 1/4

One question... you haven't mentioned that the vacuum doesn't work now... as hard as this is to accept... if it doesn't effect the function... forget about it.... i could very well have been something you vacuumed up along the way.\015\012 ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

I misplaced the manual for the Bissell Momentum Cyclonic vaccum. Every website Ive found for links to get the manual only take me to Bissell vaccuming parts for sale,and I do not wish to buy parts, just need the manual.

... Bissell Vacuum - Momentum Cyclonic 1 ea Bagless Upright Vacuum

Where can I get a complete factory list of parts numbers for the Bissell 3750 Series Bagless Vacuum Cleaner. I found an exploded diagram but parts did not have official part numbers listed.

If in Australia call godfreys vacumm they can probably email one to you or look up www.bissel.com and ask them ... Bissell Vacuums

Dear tech, I have a 12amp bissel bagless cleaner model# 4220-P the part i need is under the foot lever to lower the vaccum cleaner to sweep. The part is the slide pin that locks the sweeper from lowering.It has a spring attach to it. can I buy this part bob Yurkovich

Http://geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=805734\015\012Generic problem for all Vacuums\015\012Dear tech, I have a\015\012Posted by yurk on Jul 1 ... Vacuums

Trying to find replacement part for a Bissell Power Steamer Deluxe Model 1631-1, Part Grip and Trigger Assembly Part No. 016-4181

Http://www.bettervac.com/bissell-016-4181-handle-assembly-for-big-green-machine.aspHopefully this helps. ... Bissell Vacuums

I have a Bissell Model 8905 Carpet Cleaner. I was going to replace the belts because the pump belt broke, but when I turned the machine over, a small piece fell out. It looks like a tensioner arm because it has a small round part at each end on opposite sides of an arm that has an offset or "dogleg" in it. I am looking for an exploded parts diagram to determine what the part is and where it came from.

... Bissell 8910 ProHeat Clear View Upright Vacuum

Needing part #600-6083 for Bissell 3-way Vac model #3037. Can't find part on any website. Is this part still available?

Hi there it's SmartAlec from NelsonVacuums.com.au here. If you are in Australia i can help you with any parts for Bissell machines. I would really need to get some extra de ... Bissell Vacuums

Need parts for Bissell Power Steamer Model 1695

... Bissell Carpet Cleaner Powerbrush Deep Cleaner Vacuum

We have a Bissell Powerwash 1690 with a broken "Latch assy dirty (bottom) tank. Bissell state a replacement part is no longer available. Does anyone out there have a spare or one off a defunct powerw

Sorry, we no longer have this part available for this unit. If you are interested in a new deep cleaner you can use one of these coupon codes currently to get $10 off a machine up to $99.99, or $20 off a machine priced $100 or more. The codes are S ... Bissell Vacuums

The handle release pedal wasn't allowing the handle to lower. I took off the pedal and saw the spring load part was broken. What is this part and how to replace it? Bissell 3760-3 handle release

Our vacuum recently had an issue with it's motor, we had to borrow a neighbors a couple times while we were trying to figure out what to do. We decided to take it to a place that specializes in cleaning supplies and cleaning tools to see if they had ... Vacuums

Bissell bagless upright parts near me - Bissell 3576 CleanView II Bagless Upright Vacuum

... Bissell 3576 CleanView II Bagless Upright Vacuum

Does anyone know where I can get a motor bearing for the 3595 upright vacuum. Called Bissell and they say I have to be an authorized dealer to get "internal" parts and called their "authorozed dealer" and they told me they cannot get the part and I needed a new motor...ridiculous! Anyone put a bearing on these and if so where did you get it from?

Bought the whole motor assembly for mine, no bearing only part available. THis vacuum now headed for its third motor. " $45 dollars is still cheaper than a new vacuum". That's what I said the first time... ... Bissell CleanView 3596 Bagless Upright Vacuum

I need to buy parts for my bissel - Bissell 3750 Lift Off Bagless Upright Vacuum

Parts can be purchased at www.bissell.com or by calling BISSELL Consumer Services at.....\0121-800-237-7691Mon-Fri: 8am to 10pm ETSat: 9am to 8pm ET ... Bissell 3750 Lift Off Bagless Upright Vacuum

On the KARCHAER 370, there is a split in Part No. 9.036-694 .0 Can I purchase a new part for the wand?

... Vacuums


Hi,Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.Bissell Proheat Upright Wet/ ... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum

Bissell 2x has suction coming out of the "base" part(when I put my had over the rubber ring that leads from base to the handle part there's suction), but there's no suction coming out of the hose. I'm not certain if there's a clog, 'cause I can't get the hose off.

... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum

Bissell 7901j pivot arm loose on non belt side - retaining clips look ok but loose part inside base - likely broken part? - and how to dis-assemble base (Maint manual?)

Hi,Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.Bissell Proheat Upright Wet/ ... Bissell 7901-1 ProHeat Scotchgard Upright Wet/Dry Vacuum

Bissel shampooer I have a bissell shampooer powersteamer power brush model 1694-W. I cant get it to dispense water onto the carpet anymore. I think it's because I let my 3 year old ride on it while I was shampooing. I assume I have depressed some special little part that is now broken or mashed or something. Stupid I know....

Yes there is a belt on the side that will need to be changed ... Bissell ProHeat Turbo Deep Cleaner Upright Steam Vacuum

I have a Bissell Proheat steamer carpet cleaner. There is a red L shaped part that says hips on it that I do not know where it goes. It also does not have any suction. Is the part the cause of the loss of suction and where does it go?

Http://thefuntimesguide.com/images/blogs/bissell_water_container.jpg ... Bissell ProHeat Turbo Deep Cleaner Upright Steam Vacuum

Hello :) My bissell proheat upright steam cleaner is not shooting any water out at the bottom and I was wondering what could be wrong. The handheld part is working fine, its only the vacuum part thats not squirting out any water.

... Bissell ProHeat Turbo Deep Cleaner Upright Steam Vacuum

Replacment part for bissell part no. 603-1659

... Bissell 16603 Powerlifter Vacuum

What is belt part number foe bissell 3108 - Bissell 3108 EasyVac Powerbrush Upright Vacuum

The drive belt part number is 210-0130 for the bissell 3108. The number for bissell consumer services is 1-800-237-7691, hope this helps!! ... Bissell 3108 EasyVac Powerbrush Upright Vacuum

Schematic parts diagram for bissell proheat 9200 carpet cleaner

Hi, just go to amazon here: Amazon com bissell proheat carpet cleaner parts and you can find every needed parts. I hope this was helpful. Cheers ... Bissell 9200 Upright Vacuum

Bissell 6590 wheel unit pins snapped, where can I get a replacement part

This is a very easy repair. I got a hose clamp. 1/2" wide, solid edge. Take your time and bend it the inside shape of the holder. drill 2 matching holes, It's a perfect fit. ... Bissell 6590 CleanView Bagless Upright Vacuum

Need part 603-7821 crossaction brush for Bissell # 1950

... Bissell 1950-3 Quicksteamer Plus Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0424 seconds