Having problems with your Bissell 3920 Bagless Upright Vacuum ?

Brush doesn't turn when on carpet - Bissell 3920 Bagless Upright Vacuum


Answers :

This sounds like the beater brush drive belt is either slipping, off the pulley, or broken. Unplug the vac, turn the unit over, and remove the bottom plate which may require you take out some screws.
\015\012
\015\012Depending on your model, you will see a belt on one side or the other of the pulley and beater brush assembly. It's usually best to replace the belt, especially if the vac is over a year old. This is also a good time to clean any debris from the brush and the immediate area.
\015\012
\015\012If you aren't comfortable doing this sort of work, just about any vacuum cleaner or appliance repair shop can handle this if you have one in your vicinity. Shop around.
Repair Help & Product Troubleshooting for Bissell 3920 Bagless Upright Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Brush doesn't turn when on carpet - Bissell 3920 Bagless Upright Vacuum


This sounds like the beater brush drive belt is either slipping, off the pulley, or broken. Unplug the vac, turn the unit over, and remove the bottom plate which may require you take out some screws.\015\012\015\012Depending on your mode ... Bissell 3920 Bagless Upright Vacuum

Bissell 82H1 vacuum brush won't turn - Bissell 82H1 Cleanview Helix Bagless Upright Vacuum


... Bissell 82H1 Cleanview Helix Bagless Upright Vacuum

I have a problem with my model 6585-3 bissell upright powerforce bagless turbo with turbo brush vacuum The brush has quit spinning upon removal i noticed that one side of the brush was free to spin the other side that has the rectangular piece to help hold into place seems to be locked up and will not spin is it corroded or have i lost a piece that joins with it that allows it to spin freely belts are good and motor is turning brush will not budge


... Vacuums

My brush will not turn on my Bissell 6393 upright bagless vacuum... what is wrong? The belt broke and I replaced it twice... I now have 6 more replacements but the brush still won't rotate. Do I have to get a new brush?


This type of plastic brush roll fails pretty frequently. Hair and other debis gets jammed in the end caps. The hair and debris gets hot which in turn tends to melt the plastic end caps. Remove your brush roll, hold the ends with your fingers and try ... Vacuums

Bissell 4104-w brush not turning - Bissell 4104 Bagless Upright Cyclonic Vacuum


... Bissell 4104 Bagless Upright Cyclonic Vacuum

Bissell 82H1 Brush won't turn - Bissell 82H1 Cleanview Helix Bagless Upright Vacuum


... Bissell 82H1 Cleanview Helix Bagless Upright Vacuum

Brushes won't turn and it's smoking - Bissell 3576 CleanView II Bagless Upright Vacuum


... Bissell 3576 CleanView II Bagless Upright Vacuum

8929/18z6 brush doesn't turn - Bissell 5770 Healthy Home Bagless Upright Cyclonic Vacuum


... Bissell 5770 Healthy Home Bagless Upright Cyclonic Vacuum

Brushes don't turn - Bissell 6591 Power Trak Revolution Bagless Upright Vacuum


... Bissell 6591 Power Trak Revolution Bagless Upright Vacuum

BISSELL - Lift-Off Revolution Pet Bagless Upright Vacuum main brush stopped turning


Check your belt ... Bissell Vacuums

Brush won't turn. - Bissell 5770 Healthy Home Bagless Upright Cyclonic Vacuum


Is the grey "brush" button on the handle depressed? Brush won't turn unless the button is down ... Bissell 5770 Healthy Home Bagless Upright Cyclonic Vacuum

Brush won't turn - Bissell Healthy Home HEPA Bagless Upright Vacuum - Metallic Blue


Remove the bottom plate and check the belt for breakage. If it is, it will need to be replaced. Remove the brush assembly and check the end bearings for debris accumulation. Clean the brush bearing ends and the bearing interiors. Re-lube with 3-1 oil ... Bissell Healthy Home HEPA Bagless Upright Vacuum - Metallic Blue

I have the bissell power force bagged upright vacuum and the brush is not turning, I have replaced the belt but the brush will not move but the metal piece that is hooked to the motor that spins the belt and brush is turning but the brush won't, and the belt starts to burn


Sounds like your brush roll is seized. Remove the brush roll (see picture) and make both of the end caps spin freely. If not, replace it and you should be set. *An example of a brush roll* ... Bissell 3522 PowerForce Bagged Upright Vacuum

My bissell 9400's brush rollers do not stop turning. When I was using the hose attachment for the stairs the handle was in the upright position and the brushes kept turning. Also water was leaking out of the rear right side onto the the carpet under the machine.


... Bissell 9400 ProHeat Upright Wet/Dry Vacuum

Bissel vacuum will not turn on - Bissell 6594 PowerForce Bagless Upright Vacuum


... Bissell 6594 PowerForce Bagless Upright Vacuum

Bissell 82H1 vacuum brush won't work - Bissell 82H1 Cleanview Helix Bagless Upright Vacuum


... Bissell 82H1 Cleanview Helix Bagless Upright Vacuum

Panasonic upright vacuum brushes dont turn - Panasonic Bagless Upright Vacuum Cleaner MCUL915


This may be too obvious, but do you have the Carpet switch turned on (bottom left of vac). Agitator brush does not go around if Floor/Tools is switched on, ... Panasonic Bagless Upright Vacuum Cleaner MCUL915

My Bissell vacuum cleaner won't turn on. - Bissell 6594 PowerForce Bagless Upright Vacuum


... Bissell 6594 PowerForce Bagless Upright Vacuum

Shark Euro-pro EP621 Bagless Upright Vacuum. Q regarding the brush not spinning / after troubleshooting and taking actions listed below, it now spinning for a few secs, but then stopping. Already removed hair, strings, etc. Checked that belt is aligned properly, checked that small wheel that turns belt is working (spins fine when belt removed. Oiled the turning parts a bit, that made it spin better, but still stops. It turns about 3-4 seconds then stops. If I switch it off and on again, I get ag


... Euro-Pro EP621 Bagless Upright Vacuum

My DC07 Animal Bagless Upright Cyclonic Vacuum has a small attachment for vacuuming carpeted stairs. This attachment is currently not spinning its internal brush necessary to pickup the dirt on the stairs. The rest of the vaccum is working fine. The suction cap on this attachment is pulled out, as it should be. I have checked the vacuum over thoroguhly and there are no bloackages anywhere.


Make sure to extend the wand straight up and completely out of the handle and watch that you don't kink the hose. ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

How do i change the brush on my 5770 bissell - Bissell Healthy Home HEPA Bagless Upright Vacuum - Metallic Blue


BISSELL model 5770 has a lifetime belt warranty. You can locate a BISSELL authorized service center at www.bissell.com and the belt should be replaced at no charge. ... Bissell Healthy Home HEPA Bagless Upright Vacuum - Metallic Blue

DYSON VACUUM BRUSH WON'T TURN - Dyson DC15 Animal Bagless Upright Cyclonic Vacuum


The problem will most likely be either with the PCB under a panel on the side of the chassis, or the small wires from it that feed the front brush motor. \012\012If you are technically inclined, you can ask for more detail on the repair here: ... Dyson DC15 Animal Bagless Upright Cyclonic Vacuum

Vax upright brush bar not turning - VAX Appliances VZL-6012 Bagless Upright Vacuum


... VAX Appliances VZL-6012 Bagless Upright Vacuum

My Bissell Lift-Off MultiCyclonic Pet Upright Vacuum with Detachable Canister, Bagless, 89Q9 quit working while I was vacuuming. The power ceased and now it won't turn on. What should I do?


... Bissell 89Q9 Bagless Cyclonic Vacuum

My bissell brushes are not turning - Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum


Hi,Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.Bissell Proheat Upright Wet/ ... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1796 seconds