Having problems with your Bissell 6594 PowerForce Bagless Upright Vacuum ?

I have a bissell powerforce vacuum, and instead of sucking up dirt its spitting it out of the back. what could be wrong with it?


Answers :

It could be a worn or stretched drive belt. You can get a replacement belt and view the manual here:

Bissell PowerForce Belts and Manual
Repair Help & Product Troubleshooting for Bissell 6594 PowerForce Bagless Upright Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a bissell powerforce vacuum, and instead of sucking up dirt its spitting it out of the back. what could be wrong with it?


It could be a worn or stretched drive belt. You can get a replacement belt and view the manual here:Bissell PowerForce Belts and Manual ... Bissell 6594 PowerForce Bagless Upright Vacuum

Vacuum spits dirt out of the back end as I'm vacuuming.


Heather,Does the vacuum have a switch or a lever somewhere that makes it change from floor to hose? If so, it sounds like you've been using it on the hose selection but not actually sweeping using the hose. In other words, on an upright vacuum when s ... Vacuums

Bissell cleanview 11 bagless special edition model 3576-2 I took apart to clean the filters and don't remember howto put the bottom of the dirt container back. I thought I put the empty container back in place correctly but the dirt when vacuuming is flowing through another part of the vacuum.


... Bissell Vacuums

Bissell Powerforce Bagless spitting out dirt


... Bissell 6594 PowerForce Bagless Upright Vacuum

I took the cover off the brush so I could cut off all the hair that was wrapped around it (vacuum was working fine, I just noticed the hair). I pulled the brush/spinner thing off one side, cleaned everything, popped it back in where it belonged, and tried to make sure the belt was in the proper alignment. However, when I turned the vacuum on, it makes a horrible noise like I'm sucking up rocks. What have I done wrong in putting it back together? It seemed simple...


The ends of the brush roller have to go in in a certain position.each end has a different look.make sure the match up to the seats on the roller guides and make sure the belt is centered.the belt will center itself by turning the roller by hand in on ... Dyson DC14 All floors Bagless Upright Cyclonic Vacuum

Vacuum picks up some dirt and debris but not all, and spits some back out?


Some blockage at the pickup or in the hose if it uses one---dirt etc being kicked back out is a clear sign of this----if it has a tube check that first, and if a head with turning brush do not miss looking for a blockage there. ... Eureka True Clean Upright Vacuum (Yellow) 2961BVZ

Vacuum I have a dirt devel purpose for pets vacuum. It has worked well previously. The vacuum has started spitting out debris from the bottom when slightly lifting from one floor to the next. What could be causing this. Thank you


You may have a clog in the dirt inlet by the brush roll, and also the hose. ... Vacuums

Bissell Bag Powerforce vacumn is not picking up properly. Dirt stay on carpet or blows back out. I have removed the hose and got a lot of clogged dirt but can not get all the dirt out cause I can't reach it.


... Bissell 3522 PowerForce Bagged Upright Vacuum

I have a Bissell powergroom vacuum cleaner and i sucked water into it and now it wont even turn on what could be wrong with it??? It was a very expensive vacuum and i dont want it to be thrown out


... Vacuums

Spits dirt back out at me as I vacuum, seems like there is a big gap when tilted back


... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Why is my vacuum spitting back dirt? - Hoover Platinum LiNX Cordless Stick Vacuum


... Hoover Platinum LiNX Cordless Stick Vacuum

Vacuum not picking up and spitting out dirt - Bissell 9200 Upright Vacuum


You have a screen in the tank in the upper lid it is red and needs cleaned. ... Bissell 9200 Upright Vacuum

Vacuum keeps spitting dirt back out. will not **** up the dirt


Check the hose for clogs. This problem is generally caused by the power nozzle brush running, but there's no suction to pick up what it sweeps to the hose, so debris just keeps getting scattered.\015\012Disconnect both ends of hose. Drop a ma ... Electrolux UltraLux 2000 Bagged Canister Vacuum

The vacuum is spitting dirt out the back - Dyson DC07 Bagless Upright Cyclonic Vacuum


... Dyson DC07 Bagless Upright Cyclonic Vacuum

Our vacuum model #6579-3 spits dirt and everything out the front and when trying to use the attachments we have cleaned and washed every removable part of the vacuum is there something else we could to fix it or is it permanently damaged??


... Bissell 6594 PowerForce Bagless Upright Vacuum

Spits dirt back out at me as I vacuum seems like there is a big gap when tilted back


... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

My dyson dc14 animal vacuum will not ****. Also, when I turn it on there is no power unless the vacuum is bent back. What could be wrong?


Check the fuse 1st , if that fine then power transfer damaged or faulty. Need to replaced that. Thanks. ... Vacuums

My bissell 3595-2 vacuum cleaner started turning off the power automatically. Now I can not get it to turn on. This vacuum cleaner is still in real good condition, as I have hardly used it. Please advise what could be wrong. I was thinking maybe a loose connection with the on-off switc.


... Bissell Vacuums

I replaced the belt on my Dirt Devil Featherlite Bagless Vacuum and the brush roller rubs and makes a very loud noise when turned on. I have gone exactly by the manual instructions and made sure the belt and end caps were on correctly, but the bristles still rub the back and it makes a very loud noise. Without the brush roller in the vacuum, it sounds and runs normal. What could the problem be?


Http://www.geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=561283\015\012Generic problem for all Vacuums\015\012I replaced the belt on\015\012Posted by piggyt ... Vacuums

Bissell powerforce My lower pickup tube became clogged so I removed it and cleaned it out and reinstalled it.Now everything runs good but the vaccum want pick up any dirt .I replaced the bag andf when I turn it on it just exhaust air but does not have any suction,I tired tp pull the bag door of while it was running whick I could not do so it has plenty of suction inside just not getting any outside can you help?


... Bissell Vacuums

Vacuum is spitting dirt and debris out the back--what can I do?


The first thing you should do is clean out the container then check the filter if it looks dirty with a lot of dust it probably needs replacing.check the hoes for dirt that might stick up.if the problem continues it needs a service. ... Hoover U5753-900 WindTunnel Bagless Upright Vacuum

I have a Bissell Lift-Off Revolution upright vacuum cleaner. The dirt is sticking around the black round sponge filter which is in the upper part of the cleaner. It isn't falling into the bowl like it should. What could be the cause of this?


Thats what its supposed to di i suggest to clean that filter after every couple of uses to prevent any problems in the future ... Hoover U8145-900 Savvy Bagless Upright Cyclonic Vacuum

I have bissell powerforce upright vacuum for 3 years, it's voice is too loud and noisy not like before, what's wrong with it? is it the motor or what?


More than likley its the motor bearings wearing out and the brush bearings as well by now ... Bissell 6594 PowerForce Bagless Upright Vacuum

Whem i vacuum it leaves streak marks of the dirt on the carpet. i clean out the cup and the hose, what am i doing wrong? and how could i solve this problem?


It sounds like your filters may be clogged. Try pulling out the tray directly underneath of your dirt cup. You should see a black, or plastic piece directly underneath of the dirty cup that says PULL, pull this tray out and inspect the filter. ... Bissell 89Q9 Bagless Cyclonic Vacuum

Not picking up dirt - Bissell 6594 PowerForce Bagless Upright Vacuum


Clean ALL the filters or buy new one it would be better to buy all new filters also check for clogs in the vacuum also check the belt if the belt is broken it will not pick up much 1. check all tubes for clogs if still dose not pick up 2.check the be ... Bissell 6594 PowerForce Bagless Upright Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1499 seconds