Having problems with your Bissell 6594 PowerForce Bagless Upright Vacuum ?

Belt broke 7/9/10 and we replaced it; brushes still don't move and vacuum is smoking really smells. What did we do wrong or what should we do now? This is a Powerforce Bissell.


Answers :

Need replaced Brush part no: 2031196 and Belt
\015\012part no :2031093
\015\012
\015\012
Repair Help & Product Troubleshooting for Bissell 6594 PowerForce Bagless Upright Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Belt broke 7/9/10 and we replaced it; brushes still don't move and vacuum is smoking really smells. What did we do wrong or what should we do now? This is a Powerforce Bissell.


Need replaced Brush part no: 2031196 and Belt\015\012part no :2031093\015\012\015\012 ... Bissell 6594 PowerForce Bagless Upright Vacuum

I have a Eureka Power Plus vacuum, model 4702, type A. To start off, it never really had great suction. Marginal at best. Then today I was vacuuming and smelled something burning and turned off the vacuum. At that point, smoke started pouring out from the bottom of the vacuum so I layed it on it's side and the smoke cleared but I never found the source. Is it safe to turn on again after I let it cool down or is my vacuum "shot?"


... Vacuums

I have had my Bissell Healthy Home for just over a year. I use it once or twice a week on five area rugs and two small bedrooms with wall to wall carpet. Just recently, the motor started to sound extremely loud and it smells like it's burning. The vacuum still picks up everything and all the brushes are turning. Advice? I really like this vacuum and would really like to fix it rather than replace it!


Hi,Here is a tip that I wrote about my Bissel but I bet you have the same problem and the hose is clogged...Bissell Bagless Upright Vacuum no ... Bissell 5770 Healthy Home Bagless Upright Cyclonic Vacuum

I heard that a class action lawsuit against Oreck Vacuum is being started because of all the problems customers are having with their vacuums. Does anyone know about this? My Oreck is only a couple of years old and keeps burning up belts. I took it in after only one week of usage when I started to notice white smoke coming out of it and the smell of burning rubber. I feel like I got the old run-around, when the service tech told me he couldn't find anything wrong (but replaced the burned up belt


You are correct about the fact that legal action has been taken. Go to this link to read more\015\012\015\012 ... Oreck XL2200 Bagged Upright Vacuum

I have bissell powerforce upright vacuum for 3 years, it's voice is too loud and noisy not like before, what's wrong with it? is it the motor or what?


More than likley its the motor bearings wearing out and the brush bearings as well by now ... Bissell 6594 PowerForce Bagless Upright Vacuum

Bissell powerforce vacuum brisals will not spin and i replaced the belt and it is still not wanting to spin and I think it will pop the new belt. what is wrong with it?


... Bissell 6594 PowerForce Bagless Upright Vacuum

I have a bissell powerforce vacuum, and instead of sucking up dirt its spitting it out of the back. what could be wrong with it?


It could be a worn or stretched drive belt. You can get a replacement belt and view the manual here:Bissell PowerForce Belts and Manual ... Bissell 6594 PowerForce Bagless Upright Vacuum

Bissell pet hair eraser vacuum smells like smoke


... Eureka Altima Upright Vacuum Model 2996AVS Vacuum

Bad smell inside baggless vacume? - Bissell 6594 PowerForce Bagless Upright Vacuum


Turn it on, and spray some bathroom spray in the hose. if it still smells, spray some on the filters. ... Bissell 6594 PowerForce Bagless Upright Vacuum

I have Hoover Widepath Bagless 12 Amp Windtunnel vacuum. Yesterday I was vacuuming and smelled smoke and it shut itself off. Today I cleaned out the filters (they weren't bad) made sure nothing was obstructing the hoses or the spinning brush part. It turned on for 1 second, smells like smoke somewhere from the bottom and now won't turn back on so I don't know if anything is spinning or not. What can I do to fix this myself?


Hi There,\015\012\015\012When a vacuum cleaner smokes, it is usually only one of two possible problems.\015\012\015\012It could either be that your motor burned up, or that your belts burned. The belts on this particular mod ... Hoover Self-Propelled WindTunnel Bagless Upright VacuumVacuum

Bissell lift off pet revolution vacuum smells bad when I vacuum!


Put a BOUNCE sheet inside the filter ... Bissell 37604 Lift-Off Pet Bagless Upright / Canister Vacuum CleanerVacuum

Bissel vacuum will not turn on - Bissell 6594 PowerForce Bagless Upright Vacuum


... Bissell 6594 PowerForce Bagless Upright Vacuum

Bissell vacuum burning smell - Bissell Vacuums


... Bissell Vacuums

Smoking belt Hey I have a Eureka 2961 avz bagless vacuum, and if it's on for a few minutes i can smell the belt burning.  If the vacuum is left on any longer the belt starts smoking.  I took the case off and there was a little debris but not much.  Is there a cause and fix or just time to replace the belt?


Belt is slipping because the bearings on the beater brushes, which it turns, are jammed or full of dust. \015\012Alternatively the belt has stretched after being overheated and needs replacing because it now slips. ... Eureka 2961AVZ Bagless Upright Vacuum

I bought a Kirby Diamond Ultimate G on ebay and I'm happy with it but the outside bag smells strongly of cigarette smoke. How do I clean the bag so I don't smell smoke when I vacuum?


Greetings from GoVacuum,\015\012\015\012Actually you can even wash this outer bag in the washing machine under a gentle cycle. It's best however not to put this in the dryer, but instead let it air dry completely before using it again in ... Kirby Ultimate G Bagged Upright Vacuum

My Bissell vacuum cleaner won't turn on. - Bissell 6594 PowerForce Bagless Upright Vacuum


... Bissell 6594 PowerForce Bagless Upright Vacuum

Bissell vacuum making loud noise - Bissell 6594 PowerForce Bagless Upright Vacuum


... Bissell 6594 PowerForce Bagless Upright Vacuum

How to change belt on Bissell 6582 vacuum - Bissell 6594 PowerForce Bagless Upright Vacuum


Here is a link to the belts you need and to a manual you can view with instructions.Bissell PowerForce Belts and ManualHope it helps ... Bissell 6594 PowerForce Bagless Upright Vacuum

Vacuum smell I have a new bagless Hoover Empower Widepath. When I start to vacuum, after only about 2 minutes, it starts to smell really bad, like rubber I would say. Is it band slipping, and how do I check that out to make sure??


Your belt is slipping, it is probably stretched and slips trying to drive the brush roll. Take the bottom plate off, check the brush also, make sure the ends turn freely. The belt runs from the brush roll to the motor shaft. If you can't get to th ... Vacuums

Bad suction on bissell powerforce bagless vacuum


I took the bottom apart and it needed a new belt and that was the problem so it's fixed. ... Bissell 6594 PowerForce Bagless Upright Vacuum

Bissell quicksteamer plus 1950-3 burning smell plus smoke


... Bissell 1960-3 QuickSteamer Plus Upright Vacuum

Bissell powerforce bagless upright vacuum 6594-w


Be sure when you put the dirtant dust container in place that it is in properly. I have had this and believe it or not this container has enough room to fit without it seating properly. Take the dust container out and reseat it making sure the botto ... Bissell 6594 PowerForce Bagless Upright Vacuum

I have a multifunction robotic auto vacuum cleaner model number XR210. It doesn't seem to be charging when at the docking station. The light is flashing on the docking station as if it was charging, but then I am getting intermittent noises like the vacuum is about to start up, then it beeps and goes silent again. I have emptied the machine. The display does not read 88 as if there is a malfunction, so I'm really not sure what's wrong with it. If I put the vacuum to the docking station the displ


... Vacuums

Bissell 37603 Upright Vacuum smoking


You need to call Bissell, have your model and serial number handy. They may refer you to as warranty service shop to take it to, but it will be replaced with a new one, and under warranty. Call customer service at (1-800) 237-7691 ... Bissell 37603 Upright Vacuum

I have a bissell powerforce bagless vacuum. My


Its probably is the roller brush causing the noise. ... Bissell 6594 PowerForce Bagless Upright Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0913 seconds