Having problems with your Bissell 6594 PowerForce Bagless Upright Vacuum ?

My bissell vacuum is very loud and the belt keeps breaking

\015 My bissell bagless 6579-3 vacuum is very loud and the belt keeps breaking what might the problem be?\015

Answers :

Repair Help & Product Troubleshooting for Bissell 6594 PowerForce Bagless Upright Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My bissell vacuum is very loud and the belt keeps breaking


... Bissell 6594 PowerForce Bagless Upright Vacuum

The belt on my vacuum cleaner model 6596 bissel powerforce bagless turbo keeps breaking. As soon as I put on a new belt and start it up the belt snaps. It is the durabelt meant for this vacuum model. Also, my son has been having the same problem with his. He has the same model and same belt. This problem is occurring even after a thourough cleaning.


I would guess you aren't centering the belt correctly, thus it's edge is caught between the brush and another solid object, causing the breakage.\015\012When you get the belt on the the brush and the brush back in place, turn the brush a few ti ... Bissell 6596 Bagless Upright Vacuum

Replacement parts... I've got a 3594 Bissell and the belt has come completely off. In the process of breaking, it bent the metal guide inside the motor housing and melted the plastic that holds the guide and keeps the belt inline with the roller. I've got it running again by using a screw I filed all the threads off of, but it only works for 10 minutes at a time before breaking another belt. This process is getting expensive, as it usually takes 30 minutes to completely vacuum the house. Is ther


Most likely it is the top cover that needs to be replaced, part #2031238 and is around $30. It would have that guide on it. ... Bissell 3594 CleanView PowerTrak Bagless Upright Vacuum

Belt keeps breaking on my bissell vacuum cleaner


... Bissell Vacuums

Why do the belts keep breaking - Bissell 3576 CleanView II Bagless Upright Vacuum


Hi there,\012\012\012Well the problem happens due to the belt If the belt not installed correctly, the rubber belt will grate against one of the components in the roller brush housing. The friction of the belt against the housing produces ... Bissell 3576 CleanView II Bagless Upright Vacuum

Bissell pro heat 2x belt keeps breaking - Vacuums


Check for roller bound up and shaft belt attaches to being covered in black belt residue--position of belt may be critical here. ... Vacuums

Bissell powerforce vacuum belt keeps burning and breaking


... Bissell 6594 PowerForce Bagless Upright Vacuum

The belt on my Bissell Powergroom Dual Cyclone vacuum keeps getting hot and breaking. I have replaced it twice already. What can I do?


... Bissell 6594 PowerForce Bagless Upright Vacuum

EUREKA PETPAL VACUUM: I bought the original EurekA BELTS size U from Durabelt and a belt last only 2-3 times vacuuming...it keeps breaking...why? Please help. Thank you !


... Eureka 2941AVZ Vacuum

Drive belt keeps breaking on hoover windtunnel vacuum. Drive belt won't turn the agitator. Belt is new. Small belt is new. Agitator is new.


... Hoover U6630-900 WindTunnel Bagless Upright Vacuum

Vacuum Belt keep breaking


When your first belt burnt, the burnt plastics goes into the roller ends and then it dries off causing your roller to not turn or put more pressure on your belt. Until you clean that you will continue burning your belts soon after you put them in. Yo ... Dirt Devil Breeze Bagless VacuumVacuum

My belt keeps breaking on my dirt devil classic ten amp vacuum 086600


... Dirt Devil Royal Plastic Brush Roll For Model 086600 Part 2620035600

Vacuum problem i have a bissell total floor velocity and everytime i turn it on it makes this really loud noise like it's about to exploded. We changed the belt but that wasn't the problem and we just bought the vacuum a little over a year ago.


Check the brush roll, do the ends turn freely, if not, replace it. Could have a clog in the hose or the dirt inlet by the brush roll, the other could be a bad motor. ... Vacuums

My kenmore vacuum keeps breaking belts - Vacuums


Breaking belts is usually caused by the motor keeps going and the roller gets stalled or locks up. make sure you can spin the roller freely by hand befor replacing the belt ... Vacuums

Belt keeps breaking on vacuum. - Dirt Devil M085580 Featherlite Plus Upright Vacuum


Clean the hair off the bearings. Remove the brush. Pry off the end caps and remove the hair under and around the bearings. I used a kitchen fork. ... Dirt Devil M085580 Featherlite Plus Upright Vacuum

The belt on my Dyson vacuum keeps breaking - Dyson DC17 Animal Bagless Upright Cyclonic Vacuum


SWITH OFF POWER AT SOCKET AND REMOVE\012\012REMOVE BOTTOM PLATE IF COMPETENT TO DO SO REMOVE ROLLER ASSEMBLY REMOVE ONE SIDE OF BEARING COVER AND SLIDE OUT AXLE CLEAN BOTH BEARING COVERS OF DUST AND DEBRIS ALASO FIRST CHECK FOR ITEMS JAMM ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

My Bissell Proheat 12 amp is hard to push forward(whether on or off). There is a loud clicking noise when pushing forward and it ''jumps'' up on every loud click. It's OK when pulling backwards, sprays and vacuums up water. Belt appears OK. Thanks


I had this same problem and here is what solved it for me. On a previous cleaning session, my wife decided to take the two front screws out of the clear plastic shroud that covers the brushes in order to clean behind it. Upon re-installation, she did ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

The vacuum belt keeps on breaking. - Vacuums


Hi,Most likely if your belts keep heating up and breaking there is a problem with the brush roll ( http://www.totalvac.com/store/graphics/00000001/EB29027.jpg)The roll may be worn down where the belt is supposed to fall, causi ... Vacuums

Belt keeps breaking, but motor turns easily by hand on bissell powergroom, burnt rubber smell as well.....


Something is preventing the roller from spinning when in contact with the carpet. This causes the belt to stop turning and the motor shaft spinning in one spot causes the belt to burn and break. The protective guard could be damaged or not installed ... Bissell Powergroom Pet Vacuum

My Eureka Boss vacuum belt keeps breaking


I have been searching the machine for something which could be rubbing against the belt to cause it to fray and break as often as it does. So far, I haven't found anything. I have heard that the belts, called ribbon belts, are terrible! I find tha ... Eureka Smartvac 4870 Bagged Upright Vacuum

Belt keeps breaking - Dirt Devil Reaction Twin Cyclone Upright Vacuum


In some cases when you by a belt from the brand stores the belts are not always to spec's. for example: you pick out the belt that's for your machine you go home and put it on and not even 5 to 10 mins. the belt breaks, thats because the spec's or no ... Dirt Devil Reaction Twin Cyclone Upright Vacuum

My bissell 6596 motor running hot, therefore keep breaking belt, what should i do.


... Bissell 6594 PowerForce Bagless Upright Vacuum

Why does the belt keep breaking as soon as I turn on the vacuum?


Hi\015\012Have you got the correct belt? If its breaking then the brush end caps or something is clogged. If you can get into the floor head ensure you look at the actual brush roll to see if there is anything is clogged or trapped. Remove all matter ... Eureka 431A Optima Bagless Upright Vacuum

My dyson dc01 fan belt keeps breaking - Dyson DC07 Bagless Upright Cyclonic Vacuum


Ok 1st check that the roller is free to move otherwise it will stress the belt..next no sharps on roller guide or brush roll to cut into belt..Please leave feedback ... Dyson DC07 Bagless Upright Cyclonic Vacuum

New belt keeps breaking - Dirt Devil M084600 Dynamite Bagless Upright Vacuum


Hve you cleaned the gears and brush? There is probably dirt or debris binding something up inside. ... Dirt Devil M084600 Dynamite Bagless Upright Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1211 seconds