Having problems with your Bissell 6594 PowerForce Bagless Upright Vacuum ?

Power switch will not stay on or in contact -please advise


Answers :

When it comes to electrical components it is best not to take half measures at any time. I would suggest replacing the switch. The last thing you want is to fix it temporarily and have it short out and shock you or worse.
\012If this type of repair is not your thing I would suggest going to the outlet where it was purchased or if that is not an option you have then taking it to a used vacuum store will get you the service that you require. There is a used vacuum shop in almost every city and small town in Canada and the USA.
\012good luck and thanks for choosing Fixya.com
Repair Help & Product Troubleshooting for Bissell 6594 PowerForce Bagless Upright Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Power switch will not stay on or in contact -please advise


When it comes to electrical components it is best not to take half measures at any time. I would suggest replacing the switch. The last thing you want is to fix it temporarily and have it short out and shock you or worse.\012If this type of rep ... Bissell 6594 PowerForce Bagless Upright Vacuum

When i hit the power button on my miele carina, it doesnt lock and stay on. i have to hold down the power button for the power to stay on. Please advise


Try a little WD-40 sprayed sparingly on the button. work the button a few times- may be sticky spring or contact. if that doesn't work, check with retailer where you purchased it- see if you can get a replacement switch! if you're handy, or have a ha ... Miele Carina Vacuum Vacuum

Shark s3325 stopped working while steaming; thinking the unit had ran out of water I allowed unit to cool before refilling, however unit over flowed with only 700ml water added. When I plugged unit back into outlet it would not turn on (red light was not on) but I hear a click upon plugging in unit, when turning unit power button on and when turning on the handle switch. Please advise how to resolve this problem.


... Euro-Pro S3325 Handheld Steam Vacuum

Salton WD-1044 Instant Water Dispenser - This unit just quit working. - We checked the temperature sensors and power switch - Tested ok... Please advise what else could be wrong and/or how to repair. Thank you and have a nice day


... Vacuums

All of sudden, the vacuum stopped. There is power to and through the on/off switch. Could the motor have just died without warning? Please advise. Thanks


Hi and welcome to FixYa, I am Kelly. \015\012\015\012Very nice vacuum btw! These were the competition for the Kirby Heritage II models.\015\012\015\012 Most vacuum cleaner motors are brush type motors. If a carbon brush f ... Royal 4000 Classic Bagged Upright Vacuum

I have a Hoover Elite Rewind model #uh71009. We moved recently and it was jostled around and the red power switch popped out. I put it back in but it's stuck; it stays either left or right, it doesnt move back and forth. It appears there may be another piece missing from the power switch...all I have is the red switch and a tiny cylindrical metal tube with a spring on one end. This piece fits into the hole on the red switch. Inside the vacuum itself where this goes, there is quite a large cavity


... Vacuums

Power switch won't stay on. If I hold it down the power stays on. As soon as I let up, it stops.


Most likely the ratchet mechanism on the switch is faulty.Switches are available if you search on eBay for a few pounds, and if you've reasonable DIY skills and tools, it's fairly easy to do.Have a look at ... Dyson DC07 Bagless Upright Cyclonic Vacuum

I just got a Shark Bagless Upright Pet Pro V1310PT-FS and the power switch will not stay on. If you hold it down, it will turn on and the vacuum will pick up but the switch doesn't seem to stay in the "On position". Any ideas how to quick fix this?


... Vacuums

Power switch fails to stay in ON position when pushed. I can get a replacement switch but can't figure how to remove the old switch


... Dyson DC07 Bagless Upright Cyclonic Vacuum

I press the on/off switch on the Dyson DC05 and the vauum cleaner switches on unfortunately when I stop pressing it it switches off again. Please advise how I would need to repair this. Many thanks. Regards Michael Segal


If you can make it work by holding the switch down then it must be the switch or a bad connection on it. The only way to find out is unplug the machine from the mains and remove the switch to check it. A replacement should be cheap enough.pete ... Dyson DC05 Cylinder Bagless Canister Cyclonic Vacuum

Purchased a new, portable, vacuum this date. 4/24/08 at Gottschalk's. Got it home, unpacked it and installed attachments. plugged into a power source, and depressed the power switch, machine did not come on, used three different power sources to no avail. advise--- Reply to [email protected] asap


Being under warranty, I would take it back for an exchange. You don't want something brand new and it is dead on arrival. Either that or take it to a warranty shop for repair. You mess with it and that avoids the warranty. ... Vacuums

When I hit the power switch it turns on, but it will not stay on.


If this were mine I would take the old switch off and put a toggle switch from Home Depot in it. Make sure it's rated for 110 volts and the wattage of your machine or at least 100 watts. It should cost no more than 2-3 dinero or about 1/200th the cos ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

When i push on the power button on it runs only as long as my foot stays on the on/off power switch once i move my foot it immediately shuts off?


... Dirt Devil Featherlite Bagless Vacuum M085845Vacuum

I have a Dyson slim DC18 all floors, the power switch is bad it won't stay latched I would like to get 2 of the switches. Dyson 18 s/n 334-US- A 26163 Nelson LePla 5495 S.Fordney RD Hemlock MI 48626


You can order the switch from the following sites. According to the first site, the DC17 and DC18 switches have the same part number, so I'd use the second site. It costs less. I didn't check the shipping costs, though.\015\012 ... Dyson DC18 all floors Bagless Upright Cyclonic Vacuum

I recently lost power to the power head. Thinking the hose was not sending current to the head, I bought a new hose. It did not solve my problem. I have since noticed that a warning symbel is appearing that indicates what looks like a key with TA inside. The vacumn has good suction. Please advise John.


Hi\015\012\015\012Please check the link bellow to diagnose your problem…..\015\012\015\012http://home.howstuffw ... Electrolux Epic 6500 Vacuum

I'm trying to remove the power switch assembly for my Dyson DC25 so I can replace the power cable. I took out the 3 screws with a T15 screwdriver and released the top two retainter pins, but the lower half of the assmbly won't detach. Please help!


Replace the two bottom screws but don't tighten up just a few turns in will do, then using the screwdriver push firmly each screw and this will release the lower part of the cover hope this helps. ... Vacuums

I have the new power on/off switch to replace the old one(Rainbow vacuum). However the new switch has 4 contacts & the old one has 6. Need wiring diagram.


Simply pair 1 each of the power head leads and motor leads on to one terminal and wire the cord as on previous switch. ... Rainbow E series Canister Wet/Dry Vacuum

Hoover Alpina 2 1300 cleaner. I need to split the upper and lower casings to check that the switch is working. I have removed the screwa in the area around the bag, but now need to remove the switch and cable rewind covers, as I assume there are more securing screws under them. Can you advise how to do it please?


Move covers (forcibly !) away from the centreline of cleaner then move to rear until released. The covers are held by slide catches on inner edges. ... Vacuums

Dyson will not stay powered on unless power button is continuously pressed. Is this a switch malfunction or something else?


Yes, you probably need to replace the switch - call the Dyson helpline, they'll give you the info for your closest authorized repair dealer who will open it up and replace the switch for you. ... Dyson DC07 All Floors Bagless Upright Cyclonic Vacuum

I have a Kirby Generation 3 that will not power on with the Carpet Brush attachement BUT will power on with the hose attachment. Please advise. Thanks


Make sure everything is lined up and and bag is fully attached. If it does not work after that, you could have a defective safety switch. Take it you an Authorized Kirby Dealer. Don't pay more than $40 for this repair. ... Kirby Generation 3 Bagged Upright Vacuum

Our Bissell ProHeat carpet cleaner is not working. The power is connected because the red heat lamp is on, however when you touch the foot pedal for the start of the rollers, the power is not connecting. Short somewhere??? How to locate the short? Please advise. Thank you.


Hi,Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.Bissell Proheat Upright Wet/ ... Bissell ProHeat Turbo Deep Cleaner Upright Steam Vacuum

Eureka Envirosteamer 300A power switch won't stay on


... Vacuums

Eureka 6993 power switch will not stay on


Did you eer figure out the solution? Mine is doing the same thing... ... Eureka 6993 Canister Vacuum

Keeps switching off It seems to overheat ,and for some reason the dirt collects and stays at the bottom of the cylinder. please help Alex


HIIts blocked up and overheats. Check in by the brush and the hoses. If all clear check filters ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

I have a vax cylinder model V-094. Working fine then started to play up. Switch it on and the motor seems to struggle to power up. Kind of wurrs up and down. Was thinking it could be the brushes have worn. Tokk to bits and cleaned her up, took a look at motot and brushes, cleaned them too, back together and still them same problem. Help please, hoover is not old but has done some work really don't want to through away something that can be fixed.


Hi.\015\012\015\012after all you have done I would be pretty confident its the motor thats faulty they are expensive to buy so machine is going to be scrap,\015\012\015\012Sorry.\015\012\015\012 ... Vacuums
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0504 seconds