Having problems with your Bissell 6595 Lift Off Bagless Upright Vacuum ?

Bissell 6595-1 with broken electrical connector

\015 I have Bissell Model 6595-1 Lift Off vacuum. There is a connector at the bottom of the Lift Off Canister that powers the roller brush of the base. One of the two pins broke and caused the connector to melt. Where can I purchase this connector?\015

Answers :

YES! If you haven't contacted Bissell yet (or bought a new vacuum) do so. They sent me a nice refurbished machine for free.
We had the same problem with our Bissell Model #6595-1. The connector at the base of the lift-off was burnt and causing the unit to short out which made the beater bar slow/stop. After reading some of these posts I contacted Bissell via email...they replied within a day and told me to cut the entire length of cord from our unit and mail it to them (they're paying for shipping). They are going to send us a refurbished unit of the same model. I'm adding Bissell to my list of companies that provide GREAT customer service (Canon is the other currrently on my list.)
Repair Help & Product Troubleshooting for Bissell 6595 Lift Off Bagless Upright Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Bissell 6595-1 with broken electrical connector


YES! If you haven't contacted Bissell yet (or bought a new vacuum) do so. They sent me a nice refurbished machine for free. ... Bissell 6595 Lift Off Bagless Upright Vacuum

Bissell 6595-1 connector broken


... Bissell 6595 Lift Off Bagless Upright Vacuum

Electrical Connector for Bissell 3750M


... Bissell 3750 Lift Off Bagless Upright Vacuum

6595-1 electrical connectors melted down


... Bissell 6595 Lift Off Bagless Upright Vacuum

Replacement motor I purchase a replacement motor for a F5897-900 Hoover SteamVa Motor part # 43576197 or 27242051. The replacement motor has three electrical connectors + ground were as the orginal has two electrical connectors + ground. Do I ingnore the the thrid connector and hook up the wires to the same connectors as the orginal or do I have to do some rewiring.


The manual only show one wire from the motor going to the switch, the other going to the cord, then the ground wire. I would wire it the way your old motor was, could be that some models maybe were 2 speed and the other wire would be used for that. ... Vacuums

Bissell ready tool knob broken - Bissell 8910 ProHeat Clear View Upright Vacuum


... Bissell 8910 ProHeat Clear View Upright Vacuum

I am looking for a electrical wiring diagram for my Bissell Proheat 4500 carpet cleaner so I can troubleshoot an electrical problem.


... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum

I have made electrical connention wrong -only power switch works but not the brush. I need electrical wire layout diagram for Bissel 3760-2


Send me your unit.. ... Bissell 37603 Upright Vacuum

I have a Bissell 9200e that has only been used a few times. When I have gone to turn it on it made a loud crack and then tripped the electricity and everytime I turn it on it trips the electricity. Any ideas what may be wrong?


Check plug to exclude short there, if none its an internal short circuit and machine would need opened to find it so if only used a few time return for under warranty repair. ... Bissell 9200 Upright Vacuum

Bissel shampooer I have a bissell shampooer powersteamer power brush model 1694-W. I cant get it to dispense water onto the carpet anymore. I think it's because I let my 3 year old ride on it while I was shampooing. I assume I have depressed some special little part that is now broken or mashed or something. Stupid I know....


Yes there is a belt on the side that will need to be changed ... Bissell ProHeat Turbo Deep Cleaner Upright Steam Vacuum

We have a Bissell Powerwash 1690 with a broken "Latch assy dirty (bottom) tank. Bissell state a replacement part is no longer available. Does anyone out there have a spare or one off a defunct powerw


Sorry, we no longer have this part available for this unit. If you are interested in a new deep cleaner you can use one of these coupon codes currently to get $10 off a machine up to $99.99, or $20 off a machine priced $100 or more. The codes are S ... Bissell Vacuums

Electric cord I need to know how to change the broken electric cord on my Fantom.


Welcome i nead electric directions for Panasonic MC-V7720 because I do not know which cable I have with myself connect.PLESS HELP MY. ... Vacuums

I have a kenmore 116.25615506 vac and I want to replace the connector on the power sweeper. I cannot figure out how to disassemble the "electric folding wand" to get the connector out


... Kenmore Vacuums

My bissell will not spray out water or soap. I checked the belt and it is not broken. bissell is only 6 months old and i have only used it 3 times. can you help me


It could be the water pump blocked up or the jet with old sope,,,its best to flush them through with clean water before you put them away after use,,, ... Vacuums

The Height Adjustment mechanism is broken on my Bissell 6594 and I can't seem to locate a replacement. I have already checked the Bissell website is there another option?


You could google it... ... Bissell 6594 PowerForce Bagless Upright Vacuum

Is this free? i have a bissell carpet cleaner and i cannot get the soap and water to come out. it will **** up the dirty water however. i just found the belt is broken but i can see no way of how to put a new one in. is a broken belt the reason no soap is coming out?


If it is the flat belt that broke, that is the pump belt, the pump can't work without it. To replace the belts, turn the unit over, remove the red holder, has one screw, pull it out, then the brush roll will come loose. You can replace the belts th ... Bissell Powersteamer 1694 Upright Vacuum

Replacement electric motor for Bissell Pro Heat 2x Select carpet


Bissell proheat i can spray solution from the handle but it has no suction help ... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum

I have a Bissell Little Green Scruber Model #1720-W that has a broken clip which secures the solution/clean water tank to the front of the machine. Where can I purchase the clip to repair this machine


... Vacuums

Bissell 3576 height adjustor broken


Hi Chris! Lock the vacuum in the upright position, set the height adjustment to the desired setting, then recline the handle for the change to be made.If you continue having difficulty, you may want to have one of our Authorized Service Centers i ... Bissell 3576 CleanView II Bagless Upright Vacuum

Where to buy a bissel hand release pedal parts.mine is broken


... Bissell CleanView 3596 Bagless Upright Vacuum

My miele s2 momemtum electric wand is broken, won't stay locked in position. It is telescopic.


... Miele Vacuums

Bissell Little Green w Broken Hose


... Bissell 1425 Little Green ProHeat Handheld Steam Vacuum

Bissell Lift Off Broken Belt and Brush Roller


I had the same problem. I found that the brush actually melted to the end cap (the one with the square/ovalish end). I was able to pull it off with some force and applied some WD-40, but that only worked for one more use. The brush has again melted t ... Bissell Lift-Off(R) Revolution(R) Turbo Upright Vacuum

Bissell ready tool dial broken


Hi,Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.Bissell Proheat Upright Wet/ ... Bissell 7920 ProHeat Pro-Tech Upright Wet/Dry Vacuum

Broken electrical cord


The belt can e replaced but I recommend you should take it to your local vacuum cleaner service center. They may even be able to fit a new plug on the end for you if the damage is at the plug end. ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0589 seconds