Having problems with your Bissell 7901-1 ProHeat Scotchgard Upright Wet/Dry Vacuum ?

The brush will not turn - Bissell 7901-1 ProHeat Scotchgard Upright Wet/Dry Vacuum


Answers :

Hi! Your question has come up under Bissell ProHeat, so I'll assume that's the model you're talking about. \015\012There are several possibilities. The simplest is that the drive belt has broken. There are two drive belts on the ProHeat and you're best advised to go to the Bissell website (www,bissell.com) where you can download a manual for your exact model.  Worst case scenario, which I have seen, is where the brush drive motor has become wet, it has corroded and will no longer rotate, and this burns out a little circuit board that's located in the handle.\015\012If your belts are OK, and the brushes are free to rotate, there's probably a problem with the motor and I strongly recommend consulting a professional repairer. Getting in to the machine is a minor nightmare, and getting it back together is worse. The cost of such a repair may well exceed the value of the machine.\015\012Good luck!  I value your feedback.  If this has helped please remember to rate me.  If it hasn't helped, please re-post with more details and I'll try again.
Repair Help & Product Troubleshooting for Bissell 7901-1 ProHeat Scotchgard Upright Wet/Dry Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

The brush will not turn - Bissell 7901-1 ProHeat Scotchgard Upright Wet/Dry Vacuum


Hi! Your question has come up under Bissell ProHeat, so I'll assume that's the model you're talking about. \015\012There are several possibilities. The simplest is that the drive belt has broken. There are two drive belts on the ProHeat and you' ... Bissell 7901-1 ProHeat Scotchgard Upright Wet/Dry Vacuum

My bissell brushes are not turning - Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum


Hi,Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.Bissell Proheat Upright Wet/ ... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum

Brushes won't turn - Bissell 1698 PowerSteamer ProHeat Upright Wet/Dry Vacuum


I did not read the entire manual, but I believe this should help you find your problem. http://ne ... Bissell 1698 PowerSteamer ProHeat Upright Wet/Dry Vacuum

How do i remove the brush - Bissell 7901-1 ProHeat Scotchgard Upright Wet/Dry Vacuum


At the bottom were the brush is there would be a cover plate remove the cover and then you will be able to get to it ... Bissell 7901-1 ProHeat Scotchgard Upright Wet/Dry Vacuum

BRUSHES DO NOT TURN - Bissell ProHeat Turbo Deep Cleaner Upright Steam Vacuum


It sounds like the belt came off, if it did it will be a simple fix. All you will have to do is put the belt back on and you will be good to go. If the belt is broken write down the make, model and take the belt with you a head to like walmart and se ... Bissell ProHeat Turbo Deep Cleaner Upright Steam Vacuum

Brushes not turning - Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum


The belts could be worn or broken. Here are the ones you need: Bissell Proheat 2X Belt ... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum

Brushes do not turn /model9200 - Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum


Hi,Here is a tip that will give you all the information you need to fix your Bissell Proheat Vacuum Problem. ... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum

Brush not turning and no suction - Bissell 1699 ProHeat Clear View Upright Steam Vacuum


Hi,Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.Bissell Proheat Upright Wet/ ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

Brush roller does not turn - Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum


Here is the Instruction or User Manual for the 9500 series machines ... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum

Brushes not turning - Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum


Bad belt or hair etc keeping them from turning...take it apart carefully and inspect for worn belt or broken belt, and or hair string etc. ... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum

How do I turn on brushes? - Bissell 8920 ProHeat 2XTM Upright Vacuum


Here is the Instruction or User Manual for the 8920, 9200, 9300, 9400, series machines.... ... Bissell 8920 ProHeat 2XTM Upright Vacuum

Bissell Proheat I have a Bissell ProHeat 12 amp 6 cleaning brush upright and it won't turn on anymore. We have done the basics like making sure the outlets work, etc. Changed it around to different outlets. It is not turning on. Any idea?


Things to check are the cord, switch, and the motor. ... Vacuums

I have the bissell power force bagged upright vacuum and the brush is not turning, I have replaced the belt but the brush will not move but the metal piece that is hooked to the motor that spins the belt and brush is turning but the brush won't, and the belt starts to burn


Sounds like your brush roll is seized. Remove the brush roll (see picture) and make both of the end caps spin freely. If not, replace it and you should be set. *An example of a brush roll* ... Bissell 3522 PowerForce Bagged Upright Vacuum

Bissell Proheat Instruction Manual - Bissell 7901-1 ProHeat Scotchgard Upright Wet/Dry Vacuum


Hi,Here is the User Manual for the Bissell Proheat...Heatman101 ... Bissell 7901-1 ProHeat Scotchgard Upright Wet/Dry Vacuum

Replace belt on Bissell 7901 Proheat - Bissell 7901-1 ProHeat Scotchgard Upright Wet/Dry Vacuum


On the underside of the unit, you will see a red cover about 1 inch square held on by a phillips screw on one end of the brush roller unit...remove it & you will see the toothed rubber agitator brush belt. ... Bissell 7901-1 ProHeat Scotchgard Upright Wet/Dry Vacuum

Bissell 82H1 vacuum brush won't turn - Bissell 82H1 Cleanview Helix Bagless Upright Vacuum


... Bissell 82H1 Cleanview Helix Bagless Upright Vacuum

Bissell proheat will not put water down - Bissell 7901-1 ProHeat Scotchgard Upright Wet/Dry Vacuum


Normal\012 0\012 \012 \012 \012 \012 \012 \012 MicrosoftInternetExplorer4\012 \012\012\012\012\012\012 /* Style Definitions */\012 table.MsoNormalTable\012\011{mso-style-name:"Table Normal";\012\011mso-tstyle-rowband-size:0;\012\011mso-ts ... Bissell 7901-1 ProHeat Scotchgard Upright Wet/Dry Vacuum

Bissell proheat pet brush removal - Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum


... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum

Bissell proheat 8960-1 service manual - Bissell 7901-1 ProHeat Scotchgard Upright Wet/Dry Vacuum


... Bissell 7901-1 ProHeat Scotchgard Upright Wet/Dry Vacuum

Brushes not working on bissell proheat x2 - Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum


... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum

I have a problem with my model 6585-3 bissell upright powerforce bagless turbo with turbo brush vacuum The brush has quit spinning upon removal i noticed that one side of the brush was free to spin the other side that has the rectangular piece to help hold into place seems to be locked up and will not spin is it corroded or have i lost a piece that joins with it that allows it to spin freely belts are good and motor is turning brush will not budge


... Vacuums

My brush will not turn on my Bissell 6393 upright bagless vacuum... what is wrong? The belt broke and I replaced it twice... I now have 6 more replacements but the brush still won't rotate. Do I have to get a new brush?


This type of plastic brush roll fails pretty frequently. Hair and other debis gets jammed in the end caps. The hair and debris gets hot which in turn tends to melt the plastic end caps. Remove your brush roll, hold the ends with your fingers and try ... Vacuums

Need bissell pro cleaners users guide - Bissell 7901-1 ProHeat Scotchgard Upright Wet/Dry Vacuum


BISSELL User’s Guides can be downloaded at www.bissell.com\012On the front page under Customer Service click on User’s Guides and enter the model number of your unit.\012User Guide will be displayed as a PDF file. ... Bissell 7901-1 ProHeat Scotchgard Upright Wet/Dry Vacuum

Change belt on Bissell 7901-z - Bissell 7901-1 ProHeat Scotchgard Upright Wet/Dry Vacuum


Hi,Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.Bissell Proheat Upright Wet/ ... Bissell 7901-1 ProHeat Scotchgard Upright Wet/Dry Vacuum

My Proheat will not **** up water anymore - Bissell 7901-1 ProHeat Scotchgard Upright Wet/Dry Vacuum


I have a Proheat 2X and had the same problem. I don't know if this will work with your unit... but I tried the Water Rinse setting and found water came out and was suctioned properly, but on the Light Clean, Normal Clean, and Heavy Traffic settings, ... Bissell 7901-1 ProHeat Scotchgard Upright Wet/Dry Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1213 seconds