Having problems with your Bissell 7901-1 ProHeat Scotchgard Upright Wet/Dry Vacuum ?

Product instructions need full view of internal schmatic and instructions on how to change belts or troubleshoot problems. I have the 1699 proheat and the 7901 Bissell I would appreciate a copy of operating instructions. Thank you, Raja Burns email address [email protected]


Answers :

You can change the belts from the bottom, remove the brush roll, then you can reach thru slot to change the pump belt, then the cogged belt. Wasn't sure which darwing you wanted, if it is electrical, let me know.
\015\012
\015\0120f434fa.jpg
Repair Help & Product Troubleshooting for Bissell 7901-1 ProHeat Scotchgard Upright Wet/Dry Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Product instructions need full view of internal schmatic and instructions on how to change belts or troubleshoot problems. I have the 1699 proheat and the 7901 Bissell I would appreciate a copy of operating instructions. Thank you, Raja Burns email address [email protected]


You can change the belts from the bottom, remove the brush roll, then you can reach thru slot to change the pump belt, then the cogged belt. Wasn't sure which darwing you wanted, if it is electrical, let me know.\015\012\015\012 ... Bissell 7901-1 ProHeat Scotchgard Upright Wet/Dry Vacuum

Wiring Schematices Hello, Thank you for posting the wiring schematics on FixYa. Those are the ones I needed. However, I cannot make them out on the webpage. So, if you could kindly send me a copy to my e-mail address, it would b highly appreciated. Prefferably in .pdf format if possible. Thank you very much. Desperate To Repair Kent


I had the same problem after not paying attention to the connections when replacing my motor. I spent days searching for information and only found several non-answers with small photos that no one can read.I contacted Oreck for wiring information. T ... Oreck XL Ultra Bagged Upright Vacuum

I am looking for an instruction manual for the Pinnock1 Overlocker. Is it available on line, if so I would appreciate assistance in obtaining a copy Thanks Michael


Hello\015\012Visit this site. You can either buy or download it free the manual of sewing machines you need.\015\012\015\012sewingonline.co.uk/instructions/newhomelock777/\015\012 ... Vacuums

I need to replace belt #38528-033 on a Hoover WindTunnel vacuum model #U5463-960. I've had the vacuum for a long time and have misplaced all operational and instructional info that came with it. Any help would be appreciated. Thank you.


Replace the belt on a hoover washing machine ... Vacuums

Would like a copy of the Bissell Big Green Clean machine 1670 -E instruction leaflet, I recall it was only a few sides long, unfortunately a friend i loaned it to lost it and I just wondered if anyone could help? Thanks


... Bissell Vacuums

I just bought a Danby Premiere air conditioner #317826. I need a newset of tubing, as it is messed up. I would really appreciate it, my name & address is Sammie Visage, Rt 1 box 171, Carter, OK 73627. When I visited my sister in TN, she showed me hers and I was impressed, so bought one. I live in Western OK in a town of 300, A Lowes store is 2 1/2 hours from us. So you can see why I would really appreciate your help. Thank you, Sammie Visage


... Vacuums

My sister misplaced the instruction manual to her emerson microwave and I would like to replace the instruction manual. I do not have the model number available and only know she bought it at Walmart for around $60. I would appreciate any help. Thank you.


Hi,\015\012\015\012Since you do not have the model number of the Microwave, kindly view and identify the model from the complete list on the Emerson website by clicking this ... Emerson Vacuums

The Bissell Proheat 2X doesn't release the solution. I have cleaned everything I can see and understand there is a filter somewhere. Would like to know if that would even help... ANY OTHER SUGGESTIONS WOULD BE APPRECIATED! No men around just us girls and we have NO idea how to fix it!! Thanks-Cheri


Hi,Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.Bissell Proheat Upright Wet/ ... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum

HI THERE!!! I've noticed that you have been helping me with answering questions about Kirby vacuums with my links to my guides for quite a while now. I'd like to thank you for this, but I'd like to request that you use the direct links to my guides instead of copying from them and pasting it into the answer box. If you use the links, it will help me A LOT and I would GREATLY appreciate it. Thank you again for all of your help!!!! Marci (b0sslady2001)


Http://www.geeksquad.fixya.com/ThreadView.aspx?prdid=11557&thid=534650\015\012HI THERE!!!\015\012Posted by b0sslady2001 on Apr 21, 2008\015\012I've noticed that you have been ... Kirby Ultimate G Bagged Upright Vacuum

Hi recently purchased Hoover TFC3185 Bagless cylinder vacuum cleaner from a company on ebay, but there were no instructions with it. Please would you send me instructions, My email address is [email protected], thank you


Just go to the Hoover website & you'll be able to access the owner's manual & other information. You should also contact the comapny that sold it to you & see if they misplaced the manual & instructions before sending it to you. It' ... Hoover Vacuums

We are in the process of moving, some how the instruction for our "Bissell Little Green cleaner has been misplaced or lost. Is there anyway we can get a copy or can down load a copy of the booklet. Thank you for your assistance. Kaye Mullenax


Hi, You can download and print the instruction manual in PDF format by clicking this link ... Vacuums

Bissell 7700 series, pro heat all rounder. Won't spray water. Have checked the line from the unit to the spray nozzel and all seems clear. Water doesn't seem to be flowing from the tank to the end of the unit where the hose connects into. What could be the problem? Any assistance would be greatly appreciated. Thank You. Steve


HelloGrasp the cleaning solution tank, and remove it from the machine. Reinsert the tank into the machine, making sure it fits snugly in the machine. If the tank is even slightly dislodged, water cannot get into the machine. Visually insp ... Vacuums

I work in the Pittsburgh Public Theatre costume shop. We have an old Rimoldi industrial serger withiut an instruction manual and can't seem to find one online. It says rimoldi on top and the numbers on the front plate are B.29.17 There are numbers on the back, one plate says 194076 and the other 0901-0962 Thank you- any help would be appreciated, Mindy Gregory


... Vacuums

My Bex Bissell Proheat carpet cleaner refuses to spray water from the lower jets and it is intermittant from the wand. I have cleaned the jets to no avail. Any help would be appreciated. Thanks


Hi,Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.Bissell Proheat Upright Wet/ ... Bissell 9200 Upright Vacuum

Hi the foot pedal (button release) has broken on my Bissell lift-ogg. I have bought a new part but I am struggling to see how to fit it. any help would be appreciated thanks


... Bissell 3750 Lift Off Bagless Upright Vacuum

I have a FLOOR steamer. Pullman Jet Steamer Model SC360L. I would lkie a copy of the instruction booklet. Thank you.


... Vacuums

Bissell will spray water when set to water rinse, but as soon as it is set to light, normal, or heavy cleaning, there is no spray. I have tried priming but to no avail. I put plain water in the solution tank to test without ay success. It is like it loses it's prime whenever you try to use a solution mix. Once you set it back to water rinse only and go through the priming steps, it is OK. Any help would be appreciated. Thanks.


Please check the following with liquid in both tanks.\012 \012- Check to see if the machine will spray through the hose with the setting on tools. If it does, the pump is fine. Continue troubleshooting.\012- Check for ... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum

I have a Hoover SteamVac SpinScrub with Clean Surge Carpet Cleaner. I loaned the cleaner to my son, who lives 3 hours away from me. My son returned the Steam Cleaner to me on Easter Sunday. My son failed to return the Owner's Manual. I need to clean my ottoman. I have never used the upholstery & stair cleaning tool. Would you be able to e-mail me the instructions for this chore? My e-mail address is: [email protected] My name is Kay. Thank you!


Hi,I would be glad to send that. But, you never Mention the Model Number and there are Various Models introduced by Hoover.Let me know the Manual and within Few Minutes, i would be able to send you one more email which would h ... Vacuums

Hi. I can get my FunLock 007D serger threaded fine (as it's color coded) until I get down to the area that includes threading the needle. Can you give me some instructions that will guide me through this? I have the manual that came with the machine, but the illustration isn't clear or specific enough for me to follow. I'd sure appreciate some assistance on this. My e-mail address is: [email protected] Thanks you. Vicki Flagg


More specifically, what are having problems with when it comes to threading the needle? ... Vacuums

RE: DYSON DC07. Cleaning the roller I removed one end and cleaned it. Cannot get the roller back on the vaccum. If you could give me instructions on how to do this I would be very appreciated. Thank You


Try this link. http://www.sparesaver.com/help-and-suppor ... Dyson DC07 All Floors Bagless Upright Cyclonic Vacuum

No problem I just need a manual. I bought the bissell from lowes and it was a floor model. They did not have the manual with the directions on how to use the machine. They told me I could go online and get the directions or have a manual sent to me. I would rather have a manual sent Thanks. My address is B. Carothers 5969 walker rd. walker Wv. 26180


Http://www.bissell.com/DownloadAsset.aspx?id=647 ... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum

I was given an Aroma rice/cooker steamer...Model no ARC-603 but with no instruction manual....would like to use it but have no clue how. Appreciate your advice. Thanks


... Aroma Vacuums

Again, I have a Bissel Model 3760-4. The same problem as everyone else. The beater bar will not turn. Took apart, nothing. Took to vacuum repair shop and they said it is not getting power to the motor to the beater bar. Seems like a fair number of folks are having this same issue. You would think Bissell would come up with a fix, if nothing else to save their reputation. Thanks Diane


... Bissell 37604 Lift-Off Pet Bagless Upright / Canister Vacuum CleanerVacuum

A 'burn' hole has appeared in the Microwave Outlet Cover causing arcing (or similar sparking and blue flashing!). Would replacing this cover with a new one solve the problem or does it suggest something that would quickly reoccur? Would it be an economical repair or should we ditch the machine for a replacement? Thanks in advance etc it is appreciated.


... Vacuums

I got a vacumn from a friend who ungraded and though i used at her home when i got it home it would not turn on when plugged in and i check everything and no use. my friend lost her manual. im in my 60's and on a disability fixed income so cant afford to take to repair but got lots of men at church who would help if they know how to trouble shoot it. and would really appreciate any help. thank you , ann


Hi\015\012In the UK we have similar machines but they are made by Vax. If you can't source the correct user manual from Hoover.com consider the following - it is a free download.\015\012\015\012http://www.vax.co.uk/downloads/pdf/vzl-60156016_v2 ... Hoover U5194-900 Mach5 Multi-Chamber Cyclonic Vacuum Cleaner Bagless Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0682 seconds