Having problems with your Bissell 7901-1 ProHeat Scotchgard Upright Wet/Dry Vacuum ?

Can any one send me a diagram of the internal water and soap connection for A Bissell proheat carpet cleaner Model #7901-1. i imagine pump also needs to be primed, which port do I use to do this. Thank you for your help. [email protected] 319 550-5902


Answers :

Click here for the manual - We think this will guide you,
As for the pump / port to be primed -
For Prime and loss of prime please click HERE -

From what Bissell says you must prime both - please read page 7 especially.

This should get you good to go.
Gary
142d81e.jpg
Hello,you can follow the steps below to prime your carpet cleaner model #7901-1
The flat belt on your machine has an access panel to it from the side of\015\012the machine. That belt runs the pump if it is broken or came off the\015\012machine won't pump.
\015\012
\015\012Check to make sure both of the red/black circular rubber gaskets on\015\012either solution or recovery tank are on the tanks and not stuck down\015\012inside the inlet valves on the machine itself.
\015\012
\015\012Make sure there is fluid in both tanks. Without fluid in both tanks the pump loses prime and will not work.
\015\012
\015\012If all that checks out then you are down replacing the pump, but\015\012usually when the pump goes out, you will have a short burst of water\015\012when you first turn it on and then it stops working.
you can also follow this link below for a more comprehensive instruction
http://ec1.images-amazon.com/media/i3d/01/A/man-migrate/MANUAL000001755.pdf

\015\012
\015\012Hope that helps you out-Good Luck\015\012\011\011
Thanks for using fixya,

Take care.

Repair Help & Product Troubleshooting for Bissell 7901-1 ProHeat Scotchgard Upright Wet/Dry Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Can any one send me a diagram of the internal water and soap connection for A Bissell proheat carpet cleaner Model #7901-1. i imagine pump also needs to be primed, which port do I use to do this. Thank you for your help. [email protected] 319 550-5902


Click here for the manual - We think this will guide you,As for the pump / port to be primed - For Prime and loss of prime please click ... Bissell 7901-1 ProHeat Scotchgard Upright Wet/Dry Vacuum

I'm using my Nexxtech rapid lcd battery charger for the first time and some of the the battery indicators have been flashing for days. Also the plastic cover keep falling forward. Have I got a dud and if so how can I get it replaced? I'm going way for 1 month this weekend and need to take it with me. Thanks.


... Vacuums

Shampoo attachments... I have all these attachments for my vacuum but never needed to use them. It was my mom's vacuum and she can't find the manual so I'm in a rut and my rug looks like a herd of elephants have been all over it (the rug is also my mom's) so it really needs washed. Can someone please walk me through the necessary steps to get this thing turned into a super duper carpet cleaner? Thanks.


We have manual with plenty of pictures HERE.Good Luck ... Kirby G5 Bagged Upright Vacuum

I have a WindTunnel Hoover vacuumn that is less than 1 year old. The on-off switch is worn out and the carpet height adjuster does not connect. Where is my closest service center? (So I can use my warranty) My zipcode is 58203. My phone number is: 1-201-791-3492. My email address is: [email protected] Of course, I need help as soon as possible. Thank you, Audrey Cooper


According to Hoover's web site the closest service center is \015\012\015\012\015\012\015\012MJB MAYTAG HOME APPL CENTER \015\012418 BELTRAMI AVE NWBEMIDJI MN 56601 218-751-2420\015\012which appears to be over 100 miles from you. I have ... Hoover Vacuums

Hello,I have iRobot Rooomba Discovery 4200 about 2 years,but I didn't use it about 1 year.Now I tried to use it again,but doesn't work.I charged it 16hours,the power was green,but after leaving home base again red lihgt on power and stopped to work.Do you think that I need to replace battery?Thank you


The Roomba's batteries are made to be in constant use. It is more likely that the battery cells are dried up. You will need to replace the battery. ... iRobot Roomba 4210 Bagless Robotic Vacuum

Need instruction manual on proline wet end pump, S#D30324428, Model # SD-10-1n11cb (or p) last letter, got it from a friend, and want to use it. Thanks


... Vacuums

Kirby Shampooer I need instructions on how to use my kirby shampooer. Also something I can print out the instruction that is. Thanks


Http://www.greatvacs.com/shampoo.shtml\015\012\015\012this site has instructions with pictures\015\012\015\012Hope this helps!! ... Kirby Heritage II Vacuum

No user manual/guidelines found in carton. Need some explanation of how best to use the canister, and clarification of the battery compartment 0 to 48 hours sliding switch functionality. Thank you.


You were supposed to be issued with all the pertinent manuals for the machine. Go back to the dealer and demand your manuals. ... Vacuums

I have a 5.5 hp craftsman 20 litre wet Dry vacum . I have lost the manual. & have 2 questions 1) how do I change to wet vacum from dry? Also could i use the wet mode with some water in it and let it run while I am sanding dry wall to catch the dust in the water in the container? Thanks


# 1 myou just take the bag out make sure ytou sponge filter is in place athe top and turn it on the power switch just turns on ,machine ther is no wet dry switch just an empty bagless cannister is all you need make sure the ball outlet in vacumn is w ... Vacuums

After being used a couple of times and then stored for a year, the water will not spray when the trigger is depressed. I followed the instructions to prime the pump and also found that the red gasket is in the correct place. Do you have any answers for me?


Possibly crud buildup from using non distilled water. Insert a calcium, lime, rust remover. The pink professional stuff works the best and stinks the most, but will leave a pink stain and may discolor/distort things. CLR may be slow, but is clear ... Vacuums

It will empty the cleaner but will not spray water filter is clean spray heads were taken off & i could blow threw them is it a case of no prime in pump if so should i fill pump i had this thing all apart and i now know evry inch of this matchine when i pull the triger it sometimes will spray for a sec.but thats it i also took the switch out and air goes threw when i press the switch if it is the prime in the pump how can i fill the pump . what hose on the pump will prime i thankx for your advic


The problem is most likely that your pump belt is worn, stretched or broken. Here you can get the belts you need and view the manual:htt ... Bissell Carpet Cleaner Powerbrush Deep Cleaner Vacuum

I have a carpet magic steam machine. The pump worked fine yesterday. Today, I cannot get the pump to prime. (The solution resevoir is full.) Is there anything I can do to help prime the pump? Thanks for any help!


... Vacuums

I have an old oil lamp. this motor/pump pumps mineral oil up a tubing and then the oil drips down the fishing line for lack of better word. and the pump does not work. On the motor itself it reads UPPCO, Inc. Chicago Model 50 Impedance Protected 120v-60 hz .30 amps P-8365-1 Use sonneborn mineral oil only do NOT use water. Any help would be greatly appreciated. Thanks Shelley


... Vacuums

I just bought this vacuum at a second hand store. My girlfriend told me to grab it as it such a quailty product. How ever I can't find a model number or anything else. I need a manual please. Does it take bags? Do I need to replace the filter or just wash the one I have? It is black and silver, cannister. It also says big gary's vacuum system warehouse in surry British Columbia, Canada. It also says to use filter pow-r-nozzle 96. I have no idea of the year.


I suggest you google what you know. I dont think anyone here can suggest where you can get a manual for a machine you dont even know the name of.\015\012\015\012You ask about a bag ... I dont know ... is there one in it now? You ask abo ... Vacuums

Cleaning solution does not come out of the rotating cleaning head or the hand-held nozzle the solution pump seems ok but does not run (electrical continuity check between the two leads on the pump show very low resistance so they seem to be intact) - no dirt or blockage is apparent (it is a very simple device with 1 moving part wires to the pump also pass a continuity check THERE IS NO VOLTAGE on the pump leads from the control circuit board when I turn on the "manual" cleaning mode - a


You can contact Bissell directly at the following\015\012\015\012For UK inquiries:\015\012Monday - Thursday 9 am — 5 pm\015\012Friday 9 am — 4 pm\015\012\015\012BISSELL Homecare (Overseas) Inc ... Bissell SpotBot Robotic Wet/Dry Vacuum

We have lost our instruction book and need help in using our carpet steamer. The model is. 8805 1. 06272101H.....901G. Please send me any info


Http://www.ehow.com/how_8523226_instructions-steamer-turbo-upholstery-cleaner.html?utm_source=dgmodule&utm_medium=1&campaign=momme1Here's another.http://www.ehow.com/how_7405566_use-proheat-turbo-carpet-cleaner.html ... Bissell ProHeat Turbo Deep Cleaner Upright Steam Vacuum

Bissell will spray water when set to water rinse, but as soon as it is set to light, normal, or heavy cleaning, there is no spray. I have tried priming but to no avail. I put plain water in the solution tank to test without ay success. It is like it loses it's prime whenever you try to use a solution mix. Once you set it back to water rinse only and go through the priming steps, it is OK. Any help would be appreciated. Thanks.


Please check the following with liquid in both tanks.\012 \012- Check to see if the machine will spray through the hose with the setting on tools. If it does, the pump is fine. Continue troubleshooting.\012- Check for ... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum

I need a replacement reuseable cartridge filter for my genie shopvac sv300q (10 gallon) part number 23421r. I also need a 2 1/2 inch to 1 1/4 inch acessory adapter.


Look at the Big Box store for your parts ... ... Genie Company GV150 Wet/Dry Vacuum

Need manual for Eureka Powerline Plus Model 9730 Type A - missing "door" that covers tool access port on body of upright motor...any ideas? This causes dirt to fly out unless tool hose is placed in "port"--don't always want to use tools, just main vacuum.


I found it at www.vacpartswarehouse.com for $4.79 + sh ... Eureka Powerline LiteSpeed 5845 Upright Vacuum

I used my steamer one afternoon, and the next morning, when I plugged it in and tried to use it, it would not produce steam. What can I do? I love to clean the grout etween the floor tile with it. I need to finish my job as soon as possible. Thank you for your assistance.


Hi,Sounds like the switch on the handle or the steam release solenoid on the steam chamber is faulty ,use a volt meter/tester to see if you have current to the solenoid when you turn on the switch. \015\012If there is no current you have to go ... Euro-Pro S3325 Handheld Steam Vacuum

Need parts Anyone know where I may find replacement parts for this cleaner? I also need a manual. Thanks


Go to this site they have the schematic and replacement parts.\015\012http://www.hescoinc.com/vacuum_cleaner_parts/bissell.html ... Bissell 1631 PowerSteamer ProHeat Canister Vacuum

Cleaning! To clean the cyclonic cone Dyson say to use can-air? that may be ok for computers but not to blow out the dirt and dust from the cone in question. Someone else here suggested to use a real compressor! Well dahhh I knew that! Should I do the blowing in the living room? or may be in the bathroom? Seriously what I need is an assy. drawing to take it apart and washing it Any ideas where I can get one? Thank you John


Hi, we realy love our Dyson, but get frustrated when it gets clogged with pet fur (2 cats and 2 dogs). This takes a little effort but what we ended up doing was taking the vacuum apart into its major components and alternately blowing it out, filter ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

We lost our instructions to the Kirby Shampoo attachement and how to attach it to the main unit, the belt and how to use it. We need complete instructions and explanations on how to use this as we have tried and the belt does not attach to the main unit, the brush does not turn and the hops along the carpet and no water, etc. returns to the tray. Please help us with as simple and complete instructions as possible. THANK YOU VERY MUCH, LOUIE CAPLAN


First, you'll need to fill the tank with water (warm or cold). There are three fill lines on the side of the tank. Fill to the desired line and add one shampooer tank lid full of Kirby shampoo for each line of water. A full tank will require th ... Vacuums

Attachment problem used a new unit w/attachment for 5 minutes...dispensed solution in a powerful triangular fashion. Then the fluid quit dispensing out of the attachment nozle amost like the pump quit working. Primed the unit several times w/ no success. checked for clogs. can't tell if the floor portion is "pumping' or just dribbling solution onto the floor with the trigger. can see no leaks at this point. unit worked for about 5 minutes on apholstery


Make sure everything is filled and secured tightly, if this a new unit it should be something simple ok, also check where machine folds down that the solution hose is not being pinched its right behind the dirty water tank ... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

Need instruction/care booklet for my Bissell powerforce vaccum model #3522-5. Bacfk of vaccum hose is filled with dirt and when attachment is used, dust & dirt fly everywhere. I don't have the care booklet for the vaccum and need to figure out how to fix the problem. Thanks


... Bissell 3522 PowerForce Bagged Upright Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1137 seconds