Having problems with your Bissell 7920 ProHeat Pro-Tech Upright Wet/Dry Vacuum ?

Water is not spraying out when button is pushed.


Answers :

My guess is the wire to the switch came off - unplug unit - unscrew the top two screws on the handle - remove the cover above the button. should be two wires connected to the switch - the top one is not used. Hope this helps.
If it is not dispensing water then that means that the pump belt needs to be replaced. Here is the belt that you need:

Bissell Proheat Pump Belt
Repair Help & Product Troubleshooting for Bissell 7920 ProHeat Pro-Tech Upright Wet/Dry Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Sprays water without pushing the spray button


... Bissell ProHeat Turbo Deep Cleaner Upright Steam Vacuum

Water is not spraying out when button is pushed.


My guess is the wire to the switch came off - unplug unit - unscrew the top two screws on the handle - remove the cover above the button. should be two wires connected to the switch - the top one is not used. Hope this helps. ... Bissell 7920 ProHeat Pro-Tech Upright Wet/Dry Vacuum

The trigger on My Monster 1200W is not working. I poured the water in the canister and it sounds like it is steaming but when i go to push the button it doesnt spray.


... Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum

Water only dribbles out when button is pushed. It no longer sprays. Have cleaned nozzle several times.


... Bissell 1725-1 Little Green ProHeat Wet/Dry Vacuum

Water will not come out when i push on trigger button. So water does not come out. I have taken it apart and cleaned it. The problem seems to be in the triggerI push on the handle to release the water.


Order the part from bissel see if that fixes sound like you know what wrong just need get part number from bissell.Could be some kinda pump also thats bad not pushing out the water.I got bissle heated one black it only problem the seals r ... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum

While using my mop yesterday, it stopped letting steam come out. Tonight I plugged it up again and you could hear it trying to steam. I push the button in to release the square frame and it pushed out a burst of steam and pushed the head off. Put it back together and it still will not let steam out. No matter how much water is in it.


\012Hi,Here is a tip that I wrote about the Euro-Pro Shark Steam Mop and why it maynot be getting steam to the head...Euro-Pro Shark Ste ... Euro-Pro Shark Steam Mop - Gray/ Purple Vacuum

I have a Saeco water kettle and it will not boil water. I just recently started having this problem. When I push the boil button, the water kettle will glow red for 5 seconds. Afterwards, it automatically shuts off.


You have a thermal sensor thats gone bad causing it to turn of ... Vacuums

My culligan mark 50 water conditioner just poped its blue "push for softer water" button. I have the water source turned off. How do I fix this thing?


... Vacuums

I have the Oreck Sanapathic DMS2000 Handheld Steam Vacuum, but no steam comes out when I push the button. I hear the motor, is there any buttons I am missing or any help on how to make it work, been plugged in for 5 min now. Held button down for 2... nothing. Just a drip of water.


ORECK DMS2000 No Steam First, tested tank and filter flow together using suction via plastic tubing. Worked freely Second, removed pump and disconnected hoses and terminals [watch location,three terminals on pump, two plugs] ... Oreck Sanapathic DMS2000 Handheld Steam Vacuum

Power scrub handle: when you push th button in it drips not spraying like it should


... Hoover Steam Vac Dual V w/ SpinScrub Vacuum

When you push sprayer the water keeps spraying till tank is empty


Manual is here: http://www.bissell.com/images/UserGuides/7901_1008.pdf ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

Spray button doesn't function on Eureka Atlantis.No water spray.


Should be mechanical, torx screws are easy to remove with a torx screw driver ... Eureka Atlantis 2595A Upright Wet/Dry Vacuum

How do you unclog heater so water will spray. will not spray water/soap when trigger is pushed. Red spinning indicator will spin for a second then stop.


You can use either high pressure air or pin to clean out the jets. Then you can also spary off or rinse the screen filter ... Bissell ProHeat Turbo Deep Cleaner Upright Steam Vacuum

Bissell carpet shampooer, how do I use it there was no manualI just need bASIC INSTRUCTIONS I'm guessing push button to release shampoo, go over the whole area, scrub as necessary, then it will **** up drity water. Question there is a rinse button Does that mean that I have to go over it again 3x?


Hi,Here is a tip that will give you all the information you need to fix your Bissell Proheat Vacuum Problem.B ... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum

My Bissell Proheat 12 amp is hard to push forward(whether on or off). There is a loud clicking noise when pushing forward and it ''jumps'' up on every loud click. It's OK when pulling backwards, sprays and vacuums up water. Belt appears OK. Thanks


I had this same problem and here is what solved it for me. On a previous cleaning session, my wife decided to take the two front screws out of the clear plastic shroud that covers the brushes in order to clean behind it. Upon re-installation, she did ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

My Bissel 12 amp carpet cleaner will not dispense water when I push down on the button on the handle.I thoughly cleaned the machine it sucks water up but doesnot disperse


The water pusher needs to change. ... Vacuums

My machine makes a terrible(bearing type ) noise when I push the pump button, and it will not spray out solution


... Rug Doctor 95341 Wide Track Professional Carpet Deep Cleaner

The spray button on my bissle power steamer spray button sticks.


You may want to replace the belt. bissell uses a belt driven pump. here is a guide to show you how to replace the belt. ... Bissell 1697-7 Powersteamer Pro Deluxe Vacuum

My carpet cleaner is not spraying out water or solution. motor is working, heater is working but nothing coming out when i press the button


Check if bottom of solution tank and/or lines are gummed up. Clean and blow out lines and inspect check ball assembly.\015\012Hope this helps. Could use more info.\015\012Bob ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

Water does not come out when button is pushed


Check these items:\015\012(1) When the trigger is pulled, does the rubber pad behind the tank seal on the handle get pressed down? A rod in the upper handle presses this rubber valve to dispense water/soap.\015\012(2) Are any hoses kinke ... Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum

The model BVSTCJ coffe maker we have had for only 4 months won't brew when you push the brew now button - it immediately beeps five times as if it was just finished brewing. The filter basket and decanter are in their proper positions. Where is the level switch or whatever tells the unit that brewing is complete ie water reservoir is emty?


Rather than try to repair it or look into it, call the dealer or take it back to him as you will invalidate your warranty if you do anything to the unit, and that is not worth it. Let the dealer worry about it. ... Vacuums

Brushes won't turn on the bissell proheat 2X steam cleaner-I don't have the manual to see if there is a button I am not pushing to turn on the brushes. Also, do you put the clean water in the "bladder" in the tank? Sorry I am so dumb-this cleaner was given to me with no manual and I can't figure it out. There is a small tank on the bottom at the back of the machine, that says "formula here" and I don't know if that is where the cleaner goes or what that is for. The machine turns on just fine


... Bissell 8910 ProHeat Clear View Upright Vacuum

Have a bissell 9400-E and it doesnt spray cleaning fluid from underneath the machine, the hand tool works. have trie purging the machine with hot water in fluid tank and continuously hollding button with no joy can you help please? as my machine is just out of warranty


This may be caused because the pump belt has stretched or broken or the pump is seized and will not turn. Remove the pump belt and turn the pump rotor with your fingers to see it turns freely. If it does then the pump should be OK but the belt ... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum

When I push the button to release the water to start the steam process, nothing happens


You will need to remove the heater coil that is located in the handle, remove and mark allthe hoses and wires then remove the screws from the plate on the coil, make sure to not lose the red seals you will see alot of calcium build up use a brush to ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

Euro-Pro X model SC410. Unit heats water but when I push the power button, it just hums.... Where can I get it repaired? or does someone know what type of tool is needed to unscrew the screws on the machine?


... Euro-Pro S3325 Handheld Steam Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0494 seconds