Having problems with your Bissell 7920 ProHeat Pro-Tech Upright Wet/Dry Vacuum ?

Sprayer not working

\015 The sprayer stops working after 2-3 minutes. My carpets used to get soaked and now they are barely wet to totally dry. Yes, the water tank and soap tank are full!\015

Answers :

Try these suggestions to get your machine working properly:
\015\012
\015\012Make sure there is liquid in both the Tank-in-Tank and the SmartMix Bottle and check for spray through the upholstery hose. If the hose does not spray please check the following:
\015\012
\015\012- Remove the belt access door and inspect the pump belt to ensure it is not broken, worn or stretched. You may also check the belt by turning on the power and watching the brush on the bottom of the machine. If the brush rotates the belt is not broken.
\015\012- Check for proper placement of the o-ring on the SmartMix Cap Insert (some o-rings are detachable and need to fit over the straw; others are molded to the cap).
\015\012- Check for liquid in the base of the machine where the SmartMix Bottle sits (SmartMix Reservoir). If there is no liquid in the reservoir, the neck on the SmartMix Bottle may be undersized, the cap will not make proper contact with the unit and the smart mix bottle will need to be replaced.
\015\012- Check for the black or red tank gasket on the SmartMix Bottle Cap and on the bottom of the Tank-in-Tank Assembly. If gasket is lodged in base of unit or has been lost, reattach gasket on auto-load or order new gasket if appropriate.
\015\012- Check the valves on the bottoms of the Tank-in-Tank and SmartMix Bottle to make sure water/solution will come through when the "x" valve is depressed. Bladder or SmartMix bottle may be empty or the valve may be blocked internally.
\015\012- Check if the small rounded window tabs on the top edge of the Floor Nozzle Window are locked in their mating slots on the base of the machine and not inadvertently lifting the tank up out of place.
\015\012
\015\012If these suggestions do not solve the problem, contact a technician at a local BISSELL Authorized Service Center inspect your machine.
\015\012To locate your nearest BISSELL Authorized Service Center, please go to www.bissell.com. Click on the Customer Support tab near the top of the homepage and enter your zip code in the Service Center locator box to perform your search.
\015\012
\015\012You can also locate a Service Center by phone, 24 hours a day, by calling 1-800-237-7691 and choosing option #1.
Repair Help & Product Troubleshooting for Bissell 7920 ProHeat Pro-Tech Upright Wet/Dry Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a bissel proheat 2x and everything works on it except the bottom sprayer. I cleaned everything out on it and everything is in place but it wont spray. Can someone help me through this to get it working?


... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum

Cannot get sprayer to work - Bona X Hardwood Floor Sprayer Mop, With Floor Cleaner And Cleaning Pad"


... Bona X Hardwood Floor Sprayer Mop, With Floor Cleaner And Cleaning Pad"

Rug doctor new rug doctor. Vacuun works. Sprayer does not work. What should I do?


... Vacuums

Sprayer is not working, but leaks water


I think you have two problems. The leaking is old seals on either the containers, or on the other end (the machine). Try replacing them. There are various part websites for these. \015\012The problem with the spraying could be the belt that tu ... Bissell 7920 ProHeat Pro-Tech Upright Wet/Dry Vacuum

Sprayer not working


Try these suggestions to get your machine working properly:\015\012\015\012Make sure there is liquid in both the Tank-in-Tank and the SmartMix Bottle and check for spray through the upholstery hose. If the hose does not spray please chec ... Bissell 7920 ProHeat Pro-Tech Upright Wet/Dry Vacuum

Hoover spot scrubber sprayer not working well.


You can replace both tubes if it helps or you can check for blockages and check the pump off the video belowhttp://www.youtube.com/watch?feature=playe ... Tti Vacuums

My flojet sprayer pump won't work. It has no suction.


... Bissell 8910 ProHeat Clear View Upright Vacuum

The sprayer won't work


May need a new trigger valve number 50 bottom of page off this link belowhttp://www.vacsite.com/en/bissell-parts-1/bissell-parts/25a3-proheat- ... Bissell 25A3 Proheat Upright Deep Heated Cleaner Chemicals Included

Sprayer stop working - Bissell Carpet Cleaner Powerbrush Deep Cleaner Vacuum


If it stopped spraying all lines may be clogged up try taking it apart and clean each line one by one i say one at a time so you dont mix up lines i had same problem when i was fixing a friends 2 main lines were clogged with old soap if unsed for som ... Bissell Carpet Cleaner Powerbrush Deep Cleaner Vacuum

I have a bissell powerlifter carpet and upholstery cleaner purchased in 2000-2001 by my wife. the sprayer does not work, it appears that the liquid is not being pulled up out of the tank. i am wondering if there is a part missing from machine. something that may need to go into the main tank. please advise.


I knew someone who had a problem with bissell before. I think they had to take it apart and clean the hose, dirt could be clogging it. Or you could try contacting the company. ... Bissell Vacuums

I have a Hoover SteamVac F5914-900 SpinScrub... The last time I used the hand tool attachment, it worked fine. Just tried to use it again, and now I only drips of water will come out of the hand sprayer, if that. I have tried prepping it for up to 15 seconds like the manual says... no luck with that. Also it is making a big puddle on the floor, probably because the brushes on the main unit keep spinning when I am trying to use the hand tool which I dont think they are supposed to do? Can a


The brushes can be turned off on most of them via a switch on the hood. There shouldn't be water coming out onto the floor unless you are pulling the trigger at that top. You probably broke this when attempting to use the tools. ... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

I have a bissell 2x, the suction is spotty or not at all, but sprayer works fine.


Make sure the hose to the return take is properly connected and has no cracks which would allow air to **** in there bypassing the intake. ... Bissell ProHeat Turbo Deep Cleaner Upright Steam Vacuum

Sprayer button won't work on my bona floor mop


... Bona X Hardwood Floor Sprayer Mop, With Floor Cleaner And Cleaning Pad"

Hello, I have an older Bissell Little Green Machine model 1725-1 and the sprayer does not seem to be working. Could it be clogged somewhere in the machine?


... Bissell 1725-1 Little Green ProHeat Wet/Dry Vacuum

Kirby foam sprayer attachment wont work


Hello,\015\012The trigger on the suds gun needs to be turned (to the left, I believe) to open up the sprayer. Also, make sure that the straw is firmly inserted into the hole in the bottom of the lid part. Hope this helps,\015\012Marci ... Kirby G6 Bagged Upright Vacuum

Main tank sprayer seems to have stopped working.


... Dirt Devil M091400 Platinum Force Wet/Dry Vacuum

Sprayer does not work on the bissell 1716 spot lifter powerBrush bagless handheld vacuum


... Bissell 1716 Spot Lifter PowerBrush Bagless Handheld Vacuum

The sprayer seems to have stopped spraying water, and it was working fine yesterday. Any thoughtson how to fix this?


I have had the same problem. Usually it's the soap, which has gummed up. I have soaked the head in hop water and this has taken care of the problem. I make sure to do this after I use it, and at times, filling the tank with clean water and run thi ... Bissell 1425 Little Green ProHeat Handheld Steam Vacuum

I have a Bissell Proheat wet vacuum and it no longer sprayers that spray water whenever you vacuum just recently stopped working.


Check all o'rings in the lines. If not seated correctly or worn it will lose its prime and will not spray ... Vacuums

Bissell 9200-T ProHeat 2X will not spray I have gone through the priming process it will work for a few seconds and quit. I have had it open and checked a few tubes but not sure what to do next. This occurs with both the Upholstery attachment as well as the bottom sprayers.


\012ARE THE TANKS SEATED PROPERLY AND THE AUTO-LOAD GASKETS \012IN PLACE? \012Check the bottom of the Water Tank and the Formula Bottle to make \012sure each has a red (or black) auto-load gasket attached and facing outwards ... Bissell 9200 Upright Vacuum

Everything works except the sprayer. I believe the tube is plugged. How do I get to it?


... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum

I am having problem with the sprayer to work.. It doesn't seem clugged any suggestions


I have a Proheat 2X and had the same problem. I tried the Water Rinse setting and found water came out and was suctioned properly, but on the Light Clean, Normal Clean, and Heavy Traffic settings, the unit failed to do anything. Problem may be with l ... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum

I have an older model Dirt Devil carpet shamppooer, Model # CE7100WC. The sprayer does not work.


Ne of the hoses may have a hole in it you may purchase one at a vac store ner you ... Dirt Devil Vacuums

The portable sprayer wont work. No blockages in the pick up tube and a good amount of air is being blown through?


Hello, paulI was trying to help you out here. Maybe this will help some? I was going backto some customers that asked questions in the recent past and even fartherback. It appeared that no one answeredsome of them, So, I thought I would ta ... Kirby G4 Bagged Upright Vacuum

Spotbot sprayer doesn;t work - Bissell SpotBot Robotic Wet/Dry Vacuum


... Bissell SpotBot Robotic Wet/Dry Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0345 seconds