Having problems with your Bissell 7920 ProHeat Pro-Tech Upright Wet/Dry Vacuum ?

Wont discharge shampoo! - Bissell 7920 ProHeat Pro-Tech Upright Wet/Dry Vacuum


Answers :

Make sure there is liquid in both the Tank-in-Tank and the SmartMix Bottle and check for spray through the upholstery hose. If the hose does not spray please check the following:
\012


\012

- Remove the belt access door and inspect the pump belt to ensure it is not broken, worn or stretched. You may also check the belt by turning on the power and watching the brush on the bottom of the machine. If the brush rotates the belt is not broken.
\012

- Check for proper placement of the o-ring on the SmartMix Cap Insert (some o-rings are detachable and need to fit over the straw; others are molded to the cap).
\012

- Check for liquid in the base of the machine where the SmartMix Bottle sits (SmartMix Reservoir). If there is no liquid in the reservoir, the neck on the SmartMix Bottle may be undersized, the cap will not make proper contact with the unit and the smart mix bottle will need to be replaced.
\012

- Check for the black or red tank gasket on the SmartMix Bottle Cap and on the bottom of the Tank-in-Tank Assembly. If gasket is lodged in base of unit or has been lost, reattach gasket on auto-load or order new gasket if appropriate.
\012

- Check the valves on the bottoms of the Tank-in-Tank and SmartMix Bottle to make sure water/solution will come through when the "x" valve is depressed. Bladder or SmartMix bottle may be empty or the valve may be blocked internally.
\012

- Check if the small rounded window tabs on the top edge of the Floor Nozzle Window are locked in their mating slots on the base of the machine and not inadvertently lifting the tank up out of place.
\012

Repair Help & Product Troubleshooting for Bissell 7920 ProHeat Pro-Tech Upright Wet/Dry Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Wont discharge shampoo! - Bissell 7920 ProHeat Pro-Tech Upright Wet/Dry Vacuum


Make sure there is liquid in both the Tank-in-Tank and the SmartMix Bottle and check for spray through the upholstery hose. If the hose does not spray please check the following:\012 \012- Remove the belt access door and inspect ... Bissell 7920 ProHeat Pro-Tech Upright Wet/Dry Vacuum

No fluid comes out when I shampoo - Bissell 7920 ProHeat Pro-Tech Upright Wet/Dry Vacuum


The most common problem is a clogged heater core. Take it to a vac shop. They can bypass it or install a new one. ... Bissell 7920 ProHeat Pro-Tech Upright Wet/Dry Vacuum

Truction for bissell pro heat turbo 2x - Bissell 7920 ProHeat Pro-Tech Upright Wet/Dry Vacuum


... Bissell 7920 ProHeat Pro-Tech Upright Wet/Dry Vacuum

Bissell pro heat not spraying water - Bissell 7920 ProHeat Pro-Tech Upright Wet/Dry Vacuum


Hi,Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.Bissell Proheat Upright Wet/ ... Bissell 7920 ProHeat Pro-Tech Upright Wet/Dry Vacuum

Changing the belt on a bissell proheat 9200 - Bissell 7920 ProHeat Pro-Tech Upright Wet/Dry Vacuum


Hi,\012\012Here is a tip that will give you all the information you need to fix your Bissell Proheat Vacuum Problem.\012\012 ... Bissell 7920 ProHeat Pro-Tech Upright Wet/Dry Vacuum

How to change pump belt on bissell pro heat - Bissell 7920 ProHeat Pro-Tech Upright Wet/Dry Vacuum


First take off the cover on the left side oif the top cover, then turn it over, remove the screw holding the red lock and pull the cap and brush roll out, remove the cap, remove the cogged belt, then you can put the new pump belt thru that slot, put ... Bissell 7920 ProHeat Pro-Tech Upright Wet/Dry Vacuum

Service store to buy parts for proheat 7920 - Bissell 7920 ProHeat Pro-Tech Upright Wet/Dry Vacuum


... Bissell 7920 ProHeat Pro-Tech Upright Wet/Dry Vacuum

How to operate my vacuum - Bissell 7920 ProHeat Pro-Tech Upright Wet/Dry Vacuum


Do you have a manual that tells you how to use it or go on youtube to look it up on youtube it will show you how to use it ... Bissell 7920 ProHeat Pro-Tech Upright Wet/Dry Vacuum

Bissell rug cleaner does not spray - Bissell 7920 ProHeat Pro-Tech Upright Wet/Dry Vacuum


It could actually be something else entirely. Notice the person telling you to replace the belt is a company that sells vacuum belts. ... Bissell 7920 ProHeat Pro-Tech Upright Wet/Dry Vacuum

How do i use my bissell 7920 - Bissell 7920 ProHeat Pro-Tech Upright Wet/Dry Vacuum


The 7920 is a great little carpet shampooing vacuum. Look up manual information for detailed assembly and starting/breakdown procedures. Make certain that the carpet/floor has been vacuumed previous to cleaning with the shampooer! The small nozzle op ... Bissell 7920 ProHeat Pro-Tech Upright Wet/Dry Vacuum

Bissell heavy duty 9326 lost manual - Bissell 7920 ProHeat Pro-Tech Upright Wet/Dry Vacuum


Go here > http://uk.bissell.com/images/UserGuides/7920K_405.pdf ... Bissell 7920 ProHeat Pro-Tech Upright Wet/Dry Vacuum

Bissell won't spray water - Bissell 7920 ProHeat Pro-Tech Upright Wet/Dry Vacuum


Does water squirt out of the hose nozzle, if it does, then check the heater inside the handle asm. Make sure that where the tubes hook up to it are not clogged. If water doesn't squirt, check for the seal at the bottom of the tank, it needs to be o ... Bissell 7920 ProHeat Pro-Tech Upright Wet/Dry Vacuum

How to I check the belt for the vacuum? - Bissell 7920 ProHeat Pro-Tech Upright Wet/Dry Vacuum


There are some instructions for the pump & brush belt at http://www.bissell.com/WorkArea/DownloadAsset.aspx?id=629 and the general user instructions http://www.bissell.com/DownloadAsset.aspx?id=635 ... Bissell 7920 ProHeat Pro-Tech Upright Wet/Dry Vacuum

Instructions for use - Bissell 7920 ProHeat Pro-Tech Upright Wet/Dry Vacuum


Hi,\015\012\015\012You can download the complete instruction manual in PDF format by clicking this link.\015\012\ ... Bissell 7920 ProHeat Pro-Tech Upright Wet/Dry Vacuum

How do you work it? - Bissell 7920 ProHeat Pro-Tech Upright Wet/Dry Vacuum


I have just replaced a broken pump belting thinking this was the problem - the flow dial don;t spin, but it appears that the right spray is working although not a lot of pressure. WHen I try the tools, I don't have a lot of pressure and water doesn' ... Bissell 7920 ProHeat Pro-Tech Upright Wet/Dry Vacuum

How to fit new drive belt - Bissell 7920 ProHeat Pro-Tech Upright Wet/Dry Vacuum


First take off the cover on the left side oif the top cover, then turn it over, remove the screw holding the red lock and pull the cap and brush roll out, remove the cap, remove the cogged belt, then you can put the new pump belt thru that slot, put ... Bissell 7920 ProHeat Pro-Tech Upright Wet/Dry Vacuum

My brushes are not spinning? - Bissell 7920 ProHeat Pro-Tech Upright Wet/Dry Vacuum


... Bissell 7920 ProHeat Pro-Tech Upright Wet/Dry Vacuum

Won't sprayout anything - Bissell 7920 ProHeat Pro-Tech Upright Wet/Dry Vacuum


Check the heater element ... Bissell 7920 ProHeat Pro-Tech Upright Wet/Dry Vacuum

Have lost my manual for the Oxypro - Bissell 7920 ProHeat Pro-Tech Upright Wet/Dry Vacuum


Go to Bissell.com and search their site for manuels. I just down loaded a manuel for my Bissell 1697 carpet cleaner. Its Free ... Bissell 7920 ProHeat Pro-Tech Upright Wet/Dry Vacuum

We have no manual. where can wwe get one? - Bissell 7920 ProHeat Pro-Tech Upright Wet/Dry Vacuum


You can view on here for free:ProHeat Manual ... Bissell 7920 ProHeat Pro-Tech Upright Wet/Dry Vacuum

Manual - Bissell 7920 ProHeat Pro-Tech Upright Wet/Dry Vacuum


BISSELL User’s Guides can be downloaded at www.bissell.com\012On the front page under Customer Service click on User’s Guides and enter the model number of your unit.\012User Guide will be displayed as a PDF file. ... Bissell 7920 ProHeat Pro-Tech Upright Wet/Dry Vacuum

Water does not spray out - Bissell 7920 ProHeat Pro-Tech Upright Wet/Dry Vacuum


Make sure all hoses are hooked up and pump is running ... Bissell 7920 ProHeat Pro-Tech Upright Wet/Dry Vacuum

Wont pick up water - Bissell 7920 ProHeat Pro-Tech Upright Wet/Dry Vacuum


If it does not pick up water and the vacuum motor is running you have either a blocked hose or a bad gasket allowing vacuum pressure to escape. ... Bissell 7920 ProHeat Pro-Tech Upright Wet/Dry Vacuum

No suction - Bissell 7920 ProHeat Pro-Tech Upright Wet/Dry Vacuum


Your dirt path has a clog. You might be able to remove it by reverse suction but you will probably have to remove the hose. ... Bissell 7920 ProHeat Pro-Tech Upright Wet/Dry Vacuum

Dyson dc07 - Bissell 7920 ProHeat Pro-Tech Upright Wet/Dry Vacuum


... Bissell 7920 ProHeat Pro-Tech Upright Wet/Dry Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2344 seconds